Pete C.
Verified on Trustpilot6 Nov 2026
2019 Dacia Duster
Excellent service from initial enquiry…
Excellent service from initial enquiry to changing the windscreen,prompt and thorough
Instant quote across 10 Toyota Verso variants in under 60 seconds, fitted by approved fitters — booked in under two minutes.
Make
Toyota
Model
Verso
No card required · Free to quote
Price variation reflects the Verso's generation split and safety-system uptake. Older models without cameras or rain sensors are typically the most affordable to replace. Mid-range variants with rain sensors and basic acoustic add moderate cost. Camera-equipped models from the mid-2010s onwards carry higher calibration complexity, particularly those requiring dynamic road-based adjustment after fitting.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2024 | £605 — £605 | 1 variant | Price my 2024 |
| 2023 | £605 — £605 | 1 variant | Price my 2023 |
| 2022 | £605 — £605 | 1 variant | Price my 2022 |
| 2021 | £605 — £605 | 1 variant | Price my 2021 |
| 2020 | £605 — £605 | 1 variant | Price my 2020 |
| 2018 | £405 — £700 | 4 variants | Price my 2018 |
| 2017 | £405 — £700 | 4 variants | Price my 2017 |
| 2016 | £405 — £700 | 4 variants | Price my 2016 |
| 2015 | £405 — £700 | 3 variants | Price my 2015 |
| 2014 | £405 — £431 | 2 variants | Price my 2014 |
| 2013 | £405 — £610 | 3 variants | Price my 2013 |
| 2012 | £405 — £610 | 3 variants | Price my 2012 |
| 2011 | £405 — £610 | 3 variants | Price my 2011 |
| 2010 | £405 — £610 | 3 variants | Price my 2010 |
| 2009 | £405 — £610 | 3 variants | Price my 2009 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older Toyota Verso models can still be booked.
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.82/5 from 1,502 Trustpilot reviews.
Your booking flows from instant quote through to fitting day in four straightforward stages.
Get an instant quote through our online widget, selecting your Verso's year and trim options in about a minute.
Our parts team verifies your exact windscreen specification — camera, rain sensor, acoustic, tint — and confirms availability.
You're matched with a local technician approved by UKCG, who schedules the fit at a time that suits you.
The technician fits your windscreen (typically 45–90 minutes depending on your model's complexity) and, if your Verso has a camera, carries out or arranges the required calibration.
Your fitter confirms the drive-away time before leaving, and you're covered by a two-year warranty on the work.
From booking to road-ready typically happens within days — and you can track everything through your account.
Most Verso windscreen replacements are fitted mobile at your home or workplace — the default option. However, if your Verso is camera-equipped and requires static calibration (performed indoors with target boards), the fit and calibration are scheduled at a workshop so the technician can set up the targets correctly.
If dynamic calibration is needed (road-based), your technician may carry this out after mobile fitting, depending on their equipment. UKCG never splits a job across locations — if a workshop is needed for any part, the whole job is booked there to keep you and the safety systems accountable.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
On the Toyota Verso: fitted on every one of the 6 windscreen variants we list; model years 2009–2024.
Laminated interlayer that dampens road and wind noise — fitted to virtually all modern Verso windscreens.
Look for 'Acoustic' or 'SoundScreen' printed in one corner of the glass, or confirmed during your online quote.
On the Toyota Verso: fitted on every one of the 6 windscreen variants we list; model years 2009–2024.
A printed VIN reference box along the bottom edge of your windscreen helps identify your vehicle's chassis number at a glance.
A VIN (Vehicle Identification Number) notch is a small printed or etched box positioned along the lower edge of the windscreen that displays your vehicle's chassis number. This reference marking is a manufacturing and administrative feature, allowing quick visual identification of the vehicle without needing to consult documents. It's particularly useful for service records, insurance claims, and vehicle registration purposes. The notch itself doesn't affect the structural integrity or safety performance of the glass.
Look along the bottom edge of your windscreen — typically in one of the lower corners — for a small rectangular box containing printed digits or characters. If you're uncertain, check your vehicle's service handbook or ask your dealership or service centre to confirm whether your model includes this feature.
When your windscreen is replaced, the new glass will retain the VIN notch printed or etched by the manufacturer. This is a standard feature on replacement windscreens for compatible vehicles and requires no additional work or adjustment. The notch does not affect glass fitting, cure time, or any post-replacement calibration procedures.
On the Toyota Verso: fitted on 5 of the 6 windscreen variants we list (83%); model years 2009–2024.
A subtle green tint in the glass that reduces glare and heat — present on the vast majority of Verso variants.
Most Verso windscreens carry this tint as standard; it's subtle and often unnoticed. Confirmed during the parts check.
On the Toyota Verso: fitted on 4 of the 6 windscreen variants we list (67%); model years 2009–2024; no calibration after replacement.
Automatic wiper activation when it rains — fitted to many mid-range and higher Verso trims from the mid-2010s.
If your wipers activate automatically in light rain without you touching the stalk, you have a rain sensor; verified during booking.
On the Toyota Verso: fitted on 3 of the 6 windscreen variants we list (50%); model years 2009–2024; calibration varies by vehicle.
Forward-facing lens behind the windscreen for pre-collision warning and lane-keeping assist — part of Toyota Safety Sense.
Look for a triangular shape in the black-printed area near the rear-view mirror, or select 'Safety Sense equipped' during your quote.
We confirm the exact procedure for your specific vehicle when you book.
On the Toyota Verso: fitted on 2 of the 6 windscreen variants we list (33%); model years 2009–2024.
Solar control glass absorbs infrared rays to reduce heat and improve cabin comfort.
Solar control is a coating applied to the windscreen that absorbs the sun's infrared radiation rather than allowing it to pass through into the cabin. This reduces solar heat gain, helping to keep the interior cooler and more comfortable, particularly in warm weather or direct sunlight. The coating is transparent to visible light, so it doesn't darken the windscreen or affect visibility. It's a passive thermal management feature that works continuously whenever the sun is shining on the glass.
Check your vehicle's specification sheet or contact your dealership service centre to confirm whether solar control glass is fitted. Some manufacturers list it as 'solar control windscreen', 'heat-reflective glass', or 'thermal management glass'. It's a factory-fitted feature and won't be visibly obvious from outside the car — the coating is integral to the glass itself.
Solar control glass is a factory-fitted specification. When replacing the windscreen, a solar control variant must be sourced to match the original. This is a standard glass type with no special fitting implications or calibration requirements. Cure and drive-away times follow normal windscreen bonding procedures. Confirm with your fitter that the replacement glass includes solar control to maintain the original thermal performance.
On the Toyota Verso: fitted on 1 of the 6 windscreen variants we list (17%); model years 2016–2018; calibration varies by vehicle.
The moulded trim that surrounds your camera and sensor cluster at the top of the windscreen, typically transferred or supplied with replacement glass.
A bracket for safety features is the moulded plastic or composite shroud that sits at the top of the windscreen, framing and protecting the camera and sensor cluster mounted behind the rear-view mirror. This trim cover houses forward-facing driver-assistance cameras and sensors — equipment that monitors the road ahead for lane-keeping, collision warning, adaptive cruise control, and similar safety functions. The bracket itself is part of the vehicle's structural frame, but the trim cover you see is what protects and aesthetically integrates the technology into the windscreen area.
Look at the top centre of your windscreen, just above or around the rear-view mirror. If you see a dark moulded shroud or trim panel — often rectangular or tapered — with a visible lens or sensor window, your vehicle has a bracket for safety features. Your service history or handbook will list any ADAS (Advanced Driver Assistance System) technologies fitted. Ask your dealer or service centre if your vehicle has forward-facing cameras or sensors; if it does, you have a bracket for safety features.
On windscreen replacement, the trim cover is typically transferred from your old glass to the new one, or supplied pre-integrated with the replacement depending on the variant. This means minimal disruption to your safety system during the swap. However, if the bracket requires recalibration after glass replacement — which depends on your specific vehicle and camera type — the job may require static calibration (using a target board) or dynamic calibration (a road drive). We confirm the exact calibration procedure when we look up your vehicle.
On the Toyota Verso: fitted on 1 of the 6 windscreen variants we list (17%); model years 2016–2018; calibration varies by vehicle.
Clear windscreen glass has no tint; most cars have a slight tint as standard.
A clear windscreen contains no added tint layer. Most modern windscreens incorporate a subtle tint (typically blue, green, grey or bronze) as standard to reduce glare, provide UV protection, and improve cabin comfort. A genuinely clear windscreen is the absence of this tint. Clear glass is less common than tinted variants and is sometimes specified for aesthetic or operational reasons, though the tint difference is usually imperceptible to the naked eye.
Lower your side window halfway and hold a white piece of paper behind it. If you see a noticeable colour cast (blue, green, grey or bronze) in the side glass, your windscreen has the same tint. You can also ask your vehicle's dealership or service centre to confirm the windscreen specification in your service records.
Clear windscreen replacement uses the same installation process as any other windscreen. No special calibration or extended cure time applies. Sourcing is straightforward — clear glass is widely available as an aftermarket replacement. Installation time and drive-away restrictions follow standard windscreen replacement timings. If your vehicle has ADAS features (forward-facing camera or radar), calibration may be required after replacement depending on your specific vehicle; we confirm this when we look up your car details.
On the Toyota Verso: fitted on 1 of the 6 windscreen variants we list (17%); model years 2016–2018.
Coated windscreens have a blue or purple tint and protect your car from UV rays and heat.
A coated windscreen has a special protective layer applied to the glass that appears as a blue or purple tint and often reflects a silvery-blue colour in bright sunlight. This coating is designed to reduce the amount of ultraviolet (UV) radiation and solar heat that enters the vehicle, helping to keep the interior cooler and protecting upholstery and dashboard components from UV damage and fading. The coating is integral to the glass and doesn't require any special maintenance from you.
Look at your windscreen in bright daylight — a coated windscreen will show a distinct blue or purple tint and a silvery-blue reflection when the sun hits it directly. Check your vehicle's service booklet or window sticker (usually on the driver's door jamb), which may list the glass specification. Alternatively, ask your dealership or service centre to confirm whether your windscreen carries a UV or heat-rejection coating.
When replacing a coated windscreen, the replacement glass must match the original specification — including the coating type and tint level — to maintain the same UV and heat protection and to preserve the vehicle's interior aesthetics. Original-equipment or equivalent aftermarket coated glass is sourced to specification. The coating is applied during glass manufacture; no post-fit treatment is required. Fitting and cure times are unaffected by the presence of the coating.
On the Toyota Verso: fitted on 1 of the 6 windscreen variants we list (17%); model years 2016–2018; calibration varies by vehicle.
After fitting, the technician drives your Verso at set speeds on marked roads so the camera relearns lane lines and traffic — common on newer Safety Sense systems.
Typical for later Verso models with Safety Sense; your technician will explain the process if it applies to your fit.
On the Toyota Verso: fitted on 1 of the 6 windscreen variants we list (17%); model years 2016–2018.
Light sensors automatically turn your headlights on at dusk or in tunnels; the replacement windscreen must include the sensor bracket.
A light sensor is a small optical detector mounted on the windscreen or dashboard that monitors ambient light levels. When light drops below a threshold—at dusk or when entering a tunnel—it triggers your headlights to switch on automatically. This removes the need to manually operate the lights and improves safety by ensuring visibility when conditions darken suddenly. The sensor is typically mounted behind the windscreen's top edge or integrated into the interior mirror housing, where it has an unobstructed view of the sky.
Check your vehicle's handbook or ask your dealer whether your car has automatic headlight control or 'auto lights' as a feature. If equipped, you'll see a symbol on the stalk or dashboard dial marked with a light-bulb icon or 'AUTO' setting. When you select this mode and the ambient light dims, the headlights activate without manual input. Not all cars have this feature; it's typically found on newer or higher-specification models.
When replacing a windscreen on a vehicle with a light sensor, the replacement glass must include the correct sensor bracket or mounting point to preserve the auto-headlight function. The sensor itself does not require software calibration—it relies on physical positioning behind the windscreen's upper trim or within the mirror assembly. Ensuring the bracket is correctly installed during the fit is essential; if omitted, the auto-light feature will fail and cannot be restored without additional parts and labour.
On the Toyota Verso: fitted on 1 of the 6 windscreen variants we list (17%); model years 2016–2018; calibration varies by vehicle.
A single camera mounted near the rear-view mirror that helps with lane-keeping and collision avoidance.
A mono camera is a single-lens camera positioned behind the windscreen, typically in the upper centre area near the rear-view mirror. It captures the road ahead and uses computer vision to detect lane markings, vehicles, and road hazards. The camera feeds data to driver-assistance systems such as lane-keeping assist, lane-departure warning, and forward-collision warning. It forms the visual foundation of these safety features, allowing the vehicle to monitor road position and surrounding traffic automatically.
Look in the black trim area above the windscreen, centred behind the rear-view mirror — you will see a small triangular lens assembly or dark lens cover. Check your vehicle handbook or ask your dealer's service department to confirm your model has lane-assistance or collision-warning features; vehicles with these systems almost always have a mono camera. Dashboard warning symbols related to lane or collision systems also indicate the presence of this camera.
When the windscreen is replaced, the camera bracket and lens assembly must be removed and carefully repositioned on the new glass. The camera may require calibration after fitting to ensure accurate road detection and lane recognition. Calibration needs vary by vehicle — we confirm the exact procedure when we look up your specific vehicle. The job may take longer than a standard windscreen replacement, and workshop facilities may be required if calibration demands a controlled environment.
The Toyota Verso has been in production since 2009, evolving through two main generations as Toyota's compact multi-purpose vehicle for the UK family market. Across its run, the windscreen has grown more sophisticated — earlier models carry straightforward laminated glass, while later variants from around 2015 onwards feature acoustic interlayers, rain sensors, and camera systems as part of Toyota Safety Sense.
From the mid-2010s onwards, many Verso models gained forward-facing camera capability for pre-collision and lane-keeping systems, introducing ADAS-related brackets and silkscreen modifications behind the rear-view mirror. Camera-equipped variants require calibration after windscreen replacement — either static (indoors with targets) or dynamic (on the road), depending on the specific model year and trim.
Some Toyota Verso windscreens carry a camera that may need recalibrating after fitting. Read about ADAS calibration.
Need a price for another vehicle? Go to UK windscreen replacement and choose your make.
Own a different Toyota? We've got you — every variant, every year.
The questions customers ask us most often.
You don't need to know. Our online widget asks a few quick questions — make, model, year, and a couple of feature details — to narrow the variant down. Once booked, our parts check team verifies the exact specification against your VIN before the job is dispatched.
Almost always, yes, where a forward-facing camera is fitted. The technicians in our network include ADAS-calibration-certified specialists — we confirm whether your job needs a workshop or can complete on your driveway when we book.
Your replacement glass matches your original factory specification — same size, features and trim fitment as the glass the car left the factory with. It's UK-approved for the road and typically supplied by tier-1 manufacturers like Pilkington, Saint-Gobain, and AGC.
OEM-branded glass (with the vehicle-maker logo) is available on request at a higher price.
Most windscreen replacements happen at your chosen location — home, office, or car park. Some jobs are better suited to a workshop — for example, windscreens with ADAS cameras needing static calibration, or where access to power, shelter, or controlled conditions makes the work safer indoors. We let you know when we confirm your booking.
Most windscreen replacements take 45–90 minutes of the technician's time. ADAS calibration extends the technician's time on the job, but cure time runs in parallel — so it doesn't usually delay when you can drive. Your technician will confirm exact timings on the day.
Most UK comprehensive policies include glass cover, typically with an excess of £75–£100. If your insurer is on our approved list, the specialist you're matched with bills them directly and you just pay the excess.
Otherwise you can pay UK Car Glass directly and claim back from your insurer — our all-inclusive price is often lower than the excess anyway, so paying direct can work out cheaper.
Two years on workmanship defects — water leaks, wind noise, bonding failures — from the date of replacement. If the specialist's work isn't right, we arrange to put it right under the warranty process.
Only if your model is equipped with Toyota Safety Sense and has a forward-facing camera. About half of the Verso variants in our catalogue carry this feature. Your technician will confirm at booking whether calibration is needed and whether it's static (indoors) or dynamic (on the road). Calibration is part of the same job and doesn't extend the time before you can drive away — it runs in parallel with the adhesive cure.
Early Verso models (2009–2014) typically have straightforward laminated windscreens without cameras or rain sensors. From around 2015 onwards, rain sensors became common, and acoustic interlayers are fitted to nearly all variants. Mid-to-late models (2018+) often feature Toyota Safety Sense with a forward camera, which adds calibration to the replacement process. Our quote tool captures these differences automatically.
A shattered rear window means shard cleanup is a major part of the replacement job. Your technician will remove as much broken glass as they can reach from the accessible areas. However, small shards can lodge in places that aren't easily reachable — under seats, inside door frames, seatbelt mechanisms — during a mobile fit. We recommend a professional interior valet afterwards for thorough detailing and complete peace of mind.
Your replacement is covered by a two-year warranty from the date of fitting. This covers the workmanship (seal, fit, adhesive bond) and any manufacturer defects in the glass itself. If you notice any issues — leaks, cracks, optical distortion — contact UKCG with photos and we'll arrange an inspection. Even if your original fit was mobile, a warranty claim may require a workshop visit so we can properly assess the cause.