Instant quote across six Skoda Karoq variants from 2017 onwards, fitted by approved fitters — booked in under two minutes.
Make
Skoda
Model
Karoq
No card required · Free to quote
Prices vary primarily based on ADAS presence and calibration complexity. Models without front cameras are the most straightforward and affordable to replace. Later variants with camera systems and static calibration requirements involve additional specialist work and carry higher costs, though calibration runs in parallel with glass curing so it doesn't extend your drive-away time.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2026 | £380 — £938 | 6 variants | Price my 2026 |
| 2025 | £380 — £938 | 6 variants | Price my 2025 |
| 2024 | £380 — £938 | 6 variants | Price my 2024 |
| 2023 | £380 — £938 | 6 variants | Price my 2023 |
| 2022 | £380 — £938 | 6 variants | Price my 2022 |
| 2021 | £380 — £938 | 8 variants | Price my 2021 |
| 2020 | £380 — £740 | 6 variants | Price my 2020 |
| 2019 | £380 — £722 | 5 variants | Price my 2019 |
| 2018 | £380 — £722 | 5 variants | Price my 2018 |
| 2017 | £380 — £722 | 5 variants | Price my 2017 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older Karoqs can still be booked.
Curious why prices vary so widely? Read our UK windscreen replacement cost guide .
Showing 1 review from verified Skoda Karoq owners. Across the whole of UK Car Glass, 4.82/5 from 1,456 Trustpilot reviews.
Booking your Karoq windscreen replacement through UK Car Glass involves a simple five-step journey from quote to fitting.
Start with an instant online quote — our guided widget identifies your exact variant and confirms what features your windscreen carries in under 60 seconds.
Once booked, our team runs a parts verification to confirm the replacement glass matches your factory specification and any ADAS requirements.
You're matched with a local approved fitter in your area who has the right equipment and experience for your variant.
On fitting day, your fitter arrives with the correct glass and completes the replacement — typically 45–90 minutes for a windscreen, longer if static camera calibration is required. For calibration jobs, the full service (replacement and calibration) takes place at a workshop so we can guarantee safety systems are correctly aligned.
Your fitter confirms the drive-away time before leaving. You're covered by our two-year warranty on workmanship and glass quality.
Every Karoq replacement comes with a two-year warranty on the glass and fit, backed by specialists on our network.
Most Karoq windscreen replacements can be arranged as a mobile visit to your home or workplace. However, if your variant includes a front-facing camera system requiring static calibration, the entire job (replacement and calibration together) must take place at a workshop.
This ensures the camera is properly realigned using precision target boards and diagnostic equipment. We don't split the job across locations — calibration runs in parallel with adhesive curing, so workshop scheduling doesn't add extra time to your drive-away wait.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Acoustic glass reduces cabin noise for a quieter, more comfortable ride.
Acoustic windscreen glass is laminated with a special acoustic interlayer that absorbs and dampens sound vibrations. It reduces exterior noise—from traffic, wind, and road surface—before it enters the passenger compartment. This makes the cabin noticeably quieter and creates a more peaceful driving experience. It's a comfort feature, not a safety one; standard laminated windscreens already meet impact safety requirements.
Check your windscreen for an ear symbol, the word 'Acoustic', a capital 'A', or the term 'SoundScreen' printed in one of the four corners. These markings indicate acoustic-grade glass. You can also ask your vehicle's dealership or service centre whether your model came fitted with acoustic glass—it's often a factory option on comfort or premium trims.
Acoustic glass is always laminated and bonds to the frame like any standard windscreen, so replacement follows the normal bonded-glass procedure. No specialist calibration is required. The replacement technician will fit it using standard adhesive and sealant. Cure time and drive-away restrictions are identical to standard laminated windscreens. Acoustic glass is widely available as an aftermarket OE-equivalent option.
A printed VIN reference box along the bottom edge of your windscreen helps identify your vehicle's chassis number at a glance.
A VIN (Vehicle Identification Number) notch is a small printed or etched box positioned along the lower edge of the windscreen that displays your vehicle's chassis number. This reference marking is a manufacturing and administrative feature, allowing quick visual identification of the vehicle without needing to consult documents. It's particularly useful for service records, insurance claims, and vehicle registration purposes. The notch itself doesn't affect the structural integrity or safety performance of the glass.
Look along the bottom edge of your windscreen — typically in one of the lower corners — for a small rectangular box containing printed digits or characters. If you're uncertain, check your vehicle's service handbook or ask your dealership or service centre to confirm whether your model includes this feature.
When your windscreen is replaced, the new glass will retain the VIN notch printed or etched by the manufacturer. This is a standard feature on replacement windscreens for compatible vehicles and requires no additional work or adjustment. The notch does not affect glass fitting, cure time, or any post-replacement calibration procedures.
Your wipers automatically activate when rain falls on the windscreen.
A rain sensor is a device mounted on or behind the windscreen that detects moisture and triggers the wiper system automatically. The sensor uses infrared light to measure water droplets on the glass surface and signals the vehicle's electrical system to engage the wipers without driver input. This feature improves safety in sudden downpours and reduces driver workload in variable weather conditions.
Check your windscreen for a small sensor unit, usually mounted near the top centre behind the glass or at the base of the mirror. Look for a small dark component or lens. If your vehicle has automatic wipers that activate without you toggling the stalk, you have a rain sensor. Ask your dealer or service centre to confirm; they can check your vehicle records or wiper module settings.
Rain sensors are non-structural elements and do not require recalibration after windscreen replacement. The sensor bracket or mounting may need careful removal and reinstallation to ensure it sits correctly behind the new glass. If the sensor itself is damaged during removal, a replacement unit may be needed. Your fitter will confirm the condition and refit or replace the sensor as part of the standard replacement procedure.
Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
A camera mounted near the rear-view mirror monitors the road ahead for lane-keep and traffic-sign features.
A forward-facing camera positioned in the windscreen header area (typically mounted on or near the rear-view mirror bracket) captures video of the road ahead. This camera feeds data to driver-assistance systems such as lane-departure warning, lane-keep assist, autonomous emergency braking, and traffic-sign recognition. The camera is a core component of modern ADAS (Advanced Driver Assistance Systems) and requires precise alignment after windscreen replacement to ensure these safety features function correctly.
Look for a small dark triangular or lens-shaped component mounted in the black plastic trim area above the windscreen, typically centred near the rear-view mirror or slightly to one side. Your vehicle's handbook or infotainment menu may reference 'Lane Assist', 'Traffic Sign Recognition', or 'Autonomous Emergency Braking'. Ask your dealer or service centre directly if your car is equipped with a forward-facing camera system.
Windscreen replacement on camera-equipped vehicles requires calibration of the camera system after the new glass is fitted. The exact calibration procedure—whether static (using a target board in a controlled environment) or dynamic (road-based)—varies by vehicle make, model, and year. We confirm the precise calibration requirement when we look up your specific vehicle. Calibration ensures lane-keep, sign recognition, and emergency-braking systems function safely. This may extend the fitting schedule and may necessitate workshop-based fitting rather than mobile attendance.
We confirm the exact procedure for your specific vehicle when you book.
Heated windscreens use embedded wires to quickly clear ice and condensation in cold weather.
A heated windscreen is integrated with a fine mesh of electrical wires embedded within the glass itself. When activated, these wires generate heat to warm the windscreen surface, helping to rapidly clear frost, ice, and condensation during cold or damp conditions. This feature improves visibility and safety in winter driving and reduces reliance on engine heat and demister air, which can be slower on very cold mornings.
Check your vehicle's handbook or contact your dealership service centre — they can confirm whether your model includes this feature. Look for a dashboard symbol (usually a windscreen icon with heat waves) when you activate the function, or check your infotainment settings for a heating or climate option linked to the windscreen. Some vehicles have a dedicated button on the stalk or console.
Heated windscreens require replacement glass to be of the correct heated specification — standard unheated glass cannot be fitted. The replacement glass must be sourced to match your vehicle's exact heated-wire configuration. Installation is straightforward, though the technician will confirm the heating element is functioning correctly after fitting. No calibration is required for this feature.
The moulded trim that surrounds your camera and sensor cluster at the top of the windscreen, typically transferred or supplied with replacement glass.
A bracket for safety features is the moulded plastic or composite shroud that sits at the top of the windscreen, framing and protecting the camera and sensor cluster mounted behind the rear-view mirror. This trim cover houses forward-facing driver-assistance cameras and sensors — equipment that monitors the road ahead for lane-keeping, collision warning, adaptive cruise control, and similar safety functions. The bracket itself is part of the vehicle's structural frame, but the trim cover you see is what protects and aesthetically integrates the technology into the windscreen area.
Look at the top centre of your windscreen, just above or around the rear-view mirror. If you see a dark moulded shroud or trim panel — often rectangular or tapered — with a visible lens or sensor window, your vehicle has a bracket for safety features. Your service history or handbook will list any ADAS (Advanced Driver Assistance System) technologies fitted. Ask your dealer or service centre if your vehicle has forward-facing cameras or sensors; if it does, you have a bracket for safety features.
On windscreen replacement, the trim cover is typically transferred from your old glass to the new one, or supplied pre-integrated with the replacement depending on the variant. This means minimal disruption to your safety system during the swap. However, if the bracket requires recalibration after glass replacement — which depends on your specific vehicle and camera type — the job may require static calibration (using a target board) or dynamic calibration (a road drive). We confirm the exact calibration procedure when we look up your vehicle.
We confirm the exact procedure for your specific vehicle when you book.
Coated windscreens have a blue or purple tint and protect your car from UV rays and heat.
A coated windscreen has a special protective layer applied to the glass that appears as a blue or purple tint and often reflects a silvery-blue colour in bright sunlight. This coating is designed to reduce the amount of ultraviolet (UV) radiation and solar heat that enters the vehicle, helping to keep the interior cooler and protecting upholstery and dashboard components from UV damage and fading. The coating is integral to the glass and doesn't require any special maintenance from you.
Look at your windscreen in bright daylight — a coated windscreen will show a distinct blue or purple tint and a silvery-blue reflection when the sun hits it directly. Check your vehicle's service booklet or window sticker (usually on the driver's door jamb), which may list the glass specification. Alternatively, ask your dealership or service centre to confirm whether your windscreen carries a UV or heat-rejection coating.
When replacing a coated windscreen, the replacement glass must match the original specification — including the coating type and tint level — to maintain the same UV and heat protection and to preserve the vehicle's interior aesthetics. Original-equipment or equivalent aftermarket coated glass is sourced to specification. The coating is applied during glass manufacture; no post-fit treatment is required. Fitting and cure times are unaffected by the presence of the coating.
A transparent heating layer in the glass defrosts and defogs the windscreen evenly without visible wires.
Heated coatings are a transparent conductive layer embedded within the laminated windscreen glass itself. Rather than using visible heating filaments, this coating distributes heat evenly across the entire surface when energised. The system defrosts and defogs the windscreen efficiently, typically faster than conventional filament designs, and operates at lower energy consumption. The coating is invisible to the driver and functions as part of the vehicle's climate control system.
Check your vehicle's windscreen for the absence of visible heating wires or grid lines. Ask your dealership or service centre whether your car has a coated (invisible) heating system rather than filament-based heating. You can also check your handbook under climate control or windscreen features.
Replacement glass must carry the same transparent conductive coating for the heating circuit to function. The coating is applied during manufacturing and cannot be added afterwards. Your replacement windscreen will be sourced as an OE (original equipment) or equivalent coated variant to ensure heating performance. No additional calibration or curing implications arise from the coating itself.
Heat-reflective tinting reduces solar gain and cabin temperature, often visible as a darker shade near the windscreen's top edge.
Heat-reflective tinting is a specially formulated layer applied to the windscreen—usually concentrated in the upper band near the black dots (the frit)—designed to reflect solar radiation and reduce heat buildup inside the vehicle. This helps maintain cabin comfort, reduces air-conditioning load, and can protect interior materials from UV damage. The tint is typically darker or noticeably different in colour than the front side windows, which remain clear or lightly tinted.
Look at your windscreen from inside the vehicle and compare the tint colour to your front side windows. Heat-reflective windscreens often have a visibly darker or warmer tone, especially in the upper portion within 2 cm of the black-dot edge (the frit). You can also check your vehicle's specification sheet or ask your dealership service centre whether your model includes heat-reflective glazing.
Replacement windscreens with heat-reflective tinting must be sourced to the exact specification of your original glass—aftermarket equivalents are available but must match the tint density and reflective properties. The tinting is integral to the glass itself and cannot be applied afterwards. No calibration is required. The windscreen is bonded in place and cure time applies as standard.
A single camera mounted near the rear-view mirror that helps with lane-keeping and collision avoidance.
A mono camera is a single-lens camera positioned behind the windscreen, typically in the upper centre area near the rear-view mirror. It captures the road ahead and uses computer vision to detect lane markings, vehicles, and road hazards. The camera feeds data to driver-assistance systems such as lane-keeping assist, lane-departure warning, and forward-collision warning. It forms the visual foundation of these safety features, allowing the vehicle to monitor road position and surrounding traffic automatically.
Look in the black trim area above the windscreen, centred behind the rear-view mirror — you will see a small triangular lens assembly or dark lens cover. Check your vehicle handbook or ask your dealer's service department to confirm your model has lane-assistance or collision-warning features; vehicles with these systems almost always have a mono camera. Dashboard warning symbols related to lane or collision systems also indicate the presence of this camera.
When the windscreen is replaced, the camera bracket and lens assembly must be removed and carefully repositioned on the new glass. The camera may require calibration after fitting to ensure accurate road detection and lane recognition. Calibration needs vary by vehicle — we confirm the exact procedure when we look up your specific vehicle. The job may take longer than a standard windscreen replacement, and workshop facilities may be required if calibration demands a controlled environment.
We confirm the exact procedure for your specific vehicle when you book.
Heated zones around sensors prevent frost and moisture buildup, helping your safety systems work reliably.
A sensor heated zone is an electrical heating element integrated into or around camera, radar, or sensor mounts on the windscreen. Its purpose is to prevent frost, ice, condensation, and moisture accumulation on sensor lenses and housings. This keeps safety systems — such as lane-keeping assist, collision warning, and adaptive cruise control — functioning accurately in cold, wet, or foggy conditions. Without this heating, moisture or ice can obscure sensors and cause them to malfunction or deactivate.
Check your vehicle's handbook for mention of 'heated sensor zone' or 'sensor heating' in the windscreen or ADAS section. Look at the top edge of your windscreen where cameras or radar modules are mounted — you may see small heating elements or wiring near these components. Ask your dealership or service centre directly: they can confirm whether your specific model includes sensor heating as standard.
Windscreens with heated sensor zones require careful handling during replacement to preserve the heating element and its electrical connections. The heating circuit must be reconnected properly after the new glass is fitted. Depending on the vehicle, this may involve static or dynamic camera calibration after installation. We confirm the exact procedure — including any calibration needs — when we look up your vehicle details.
We confirm the exact procedure for your specific vehicle when you book.
Static calibration uses printed targets indoors to align your forward-facing camera after windscreen replacement.
Static camera calibration is a procedure in which a forward-facing camera system is realigned using printed target boards positioned at manufacturer-specified distances and heights in front of the vehicle. The vehicle remains stationary indoors throughout. A diagnostic tool reads the camera's view of these targets and adjusts the camera's alignment to factory specification. This ensures the camera can accurately detect road features, lane markings, pedestrians, and other objects — critical for driver-assistance systems like lane-keeping, collision warning, and adaptive cruise control to function safely and reliably.
Check your vehicle's handbook or ask your dealer's service centre whether your car has a forward-facing camera system that requires calibration after windscreen replacement. Look for driver-assistance features like lane-keeping assist, autonomous emergency braking, or adaptive cruise control on the dashboard menu. If your vehicle manual mentions 'camera calibration' or 'static target calibration', static calibration is likely part of your windscreen replacement service.
When a windscreen with an integrated or bracket-mounted camera is replaced, the camera's alignment can shift. Static calibration realigns the camera using indoor target boards, which must be performed in a workshop environment where printed targets can be positioned and secured at precise distances. This procedure is conducted after the windscreen is fitted and bonded. The workshop booking accommodates the additional time required for calibration, and we apply the no-split policy — both replacement and calibration happen at the same location on the same visit.
The Skoda Karoq has been in continuous production since 2017, establishing itself as a reliable compact SUV across the European market. All variants feature acoustic windscreens as standard, reducing cabin noise and enhancing comfort on longer journeys.
From the earliest models through to current production, the Karoq windscreen carries a green-tinted safety layer that's difficult to spot with the naked eye. Most variants are equipped with rain sensors for automatic wiper activation, and encapsulated edges that simplify replacement by arriving with the trim pre-bonded to the glass.
Around half of active Karoq variants include front-facing camera systems for driver-assistance features. Some later variants also feature heated windscreens for winter driving comfort. Camera-equipped models typically require static calibration after windscreen replacement, which is carried out at a workshop to ensure safety systems function correctly.
Own a different Skoda? We've got you — every variant, every year.
The questions customers ask us most often.
