Instant quote across 17 Renault Megane Scenic variants spanning 26 years, fitted by approved fitters — booked in under two minutes.
Make
Renault
Model
Megane Scenic
No card required · Free to quote
Prices vary with generation and equipment level. Earlier Megane Scenic models without rain sensors or acoustic glass are typically more affordable. Mid-range variants with rain sensors and standard green tinting carry moderate variation, whilst models with acoustic interlayers, solar-control coatings, or camera-equipped windscreens command higher costs due to the added complexity and calibration requirement on camera-fitted examples.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2022 | £399 — £712 | 2 variants | Price my 2022 |
| 2021 | £399 — £712 | 2 variants | Price my 2021 |
| 2020 | £399 — £712 | 2 variants | Price my 2020 |
| 2019 | £399 — £712 | 2 variants | Price my 2019 |
| 2018 | £399 — £712 | 2 variants | Price my 2018 |
| 2017 | £329 — £712 | 7 variants | Price my 2017 |
| 2016 | £329 — £712 | 8 variants | Price my 2016 |
| 2015 | £329 — £712 | 8 variants | Price my 2015 |
| 2014 | £329 — £712 | 8 variants | Price my 2014 |
| 2013 | £329 — £712 | 8 variants | Price my 2013 |
| 2012 | £329 — £712 | 8 variants | Price my 2012 |
| 2011 | £329 — £468 | 6 variants | Price my 2011 |
| 2010 | £329 — £468 | 6 variants | Price my 2010 |
| 2009 | £325 — £621 | 12 variants | Price my 2009 |
| 2008 | £325 — £621 | 7 variants | Price my 2008 |
| 2007 | £325 — £621 | 7 variants | Price my 2007 |
| 2006 | £325 — £621 | 7 variants | Price my 2006 |
| 2005 | £325 — £621 | 7 variants | Price my 2005 |
| 2004 | £325 — £621 | 7 variants | Price my 2004 |
| 2003 | £283 — £682 | 10 variants | Price my 2003 |
| 2002 | £283 — £682 | 4 variants | Price my 2002 |
| 2001 | £283 — £399 | 3 variants | Price my 2001 |
| 2000 | £283 — £335 | 2 variants | Price my 2000 |
| 1999 | £283 — £335 | 2 variants | Price my 1999 |
| 1998 | £283 — £335 | 2 variants | Price my 1998 |
| 1997 | £283 — £335 | 2 variants | Price my 1997 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older Megane Scenics can still be booked.
Curious why prices vary so widely? Read our UK windscreen replacement cost guide .
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.82/5 from 1,456 Trustpilot reviews.
Booking your Renault Megane Scenic windscreen replacement is straightforward — most jobs complete within a couple of hours.
Start with an instant online quote using our guided quiz — takes about a minute and identifies your exact variant across our 17 options.
Complete your booking at checkout in under two minutes, choosing your preferred fitting date and location.
Our team carries out a final parts check to confirm your glass specification before the technician is dispatched.
Your matched local technician arrives at your home or preferred workshop, removes the damaged windscreen, and fits your replacement glass — typically 45 to 90 minutes of hands-on time.
If your model requires camera calibration, this is completed at a workshop after the glass is set, running in parallel with adhesive cure.
Your technician confirms the drive-away time before releasing the vehicle, and you're covered by a two-year warranty on workmanship and glass quality.
From quote to fitted glass, the whole process is guided by independent specialists on our network and backed by our industry-standard two-year warranty.
Most Renault Megane Scenic windscreen replacements are fitted at your home or preferred location as standard. However, if your model is equipped with a forward-facing camera for driver assistance, the job is scheduled at a workshop so calibration can be completed after the glass is fitted.
This ensures the safety system is correctly aligned and functioning before you drive away — calibration runs in parallel with adhesive cure, so it doesn't extend your wait time.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
A printed VIN reference box along the bottom edge of your windscreen helps identify your vehicle's chassis number at a glance.
A VIN (Vehicle Identification Number) notch is a small printed or etched box positioned along the lower edge of the windscreen that displays your vehicle's chassis number. This reference marking is a manufacturing and administrative feature, allowing quick visual identification of the vehicle without needing to consult documents. It's particularly useful for service records, insurance claims, and vehicle registration purposes. The notch itself doesn't affect the structural integrity or safety performance of the glass.
Look along the bottom edge of your windscreen — typically in one of the lower corners — for a small rectangular box containing printed digits or characters. If you're uncertain, check your vehicle's service handbook or ask your dealership or service centre to confirm whether your model includes this feature.
When your windscreen is replaced, the new glass will retain the VIN notch printed or etched by the manufacturer. This is a standard feature on replacement windscreens for compatible vehicles and requires no additional work or adjustment. The notch does not affect glass fitting, cure time, or any post-replacement calibration procedures.
Your wipers automatically activate when rain falls on the windscreen.
A rain sensor is a device mounted on or behind the windscreen that detects moisture and triggers the wiper system automatically. The sensor uses infrared light to measure water droplets on the glass surface and signals the vehicle's electrical system to engage the wipers without driver input. This feature improves safety in sudden downpours and reduces driver workload in variable weather conditions.
Check your windscreen for a small sensor unit, usually mounted near the top centre behind the glass or at the base of the mirror. Look for a small dark component or lens. If your vehicle has automatic wipers that activate without you toggling the stalk, you have a rain sensor. Ask your dealer or service centre to confirm; they can check your vehicle records or wiper module settings.
Rain sensors are non-structural elements and do not require recalibration after windscreen replacement. The sensor bracket or mounting may need careful removal and reinstallation to ensure it sits correctly behind the new glass. If the sensor itself is damaged during removal, a replacement unit may be needed. Your fitter will confirm the condition and refit or replace the sensor as part of the standard replacement procedure.
Acoustic glass reduces cabin noise for a quieter, more comfortable ride.
Acoustic windscreen glass is laminated with a special acoustic interlayer that absorbs and dampens sound vibrations. It reduces exterior noise—from traffic, wind, and road surface—before it enters the passenger compartment. This makes the cabin noticeably quieter and creates a more peaceful driving experience. It's a comfort feature, not a safety one; standard laminated windscreens already meet impact safety requirements.
Check your windscreen for an ear symbol, the word 'Acoustic', a capital 'A', or the term 'SoundScreen' printed in one of the four corners. These markings indicate acoustic-grade glass. You can also ask your vehicle's dealership or service centre whether your model came fitted with acoustic glass—it's often a factory option on comfort or premium trims.
Acoustic glass is always laminated and bonds to the frame like any standard windscreen, so replacement follows the normal bonded-glass procedure. No specialist calibration is required. The replacement technician will fit it using standard adhesive and sealant. Cure time and drive-away restrictions are identical to standard laminated windscreens. Acoustic glass is widely available as an aftermarket OE-equivalent option.
Solar control glass absorbs infrared rays to reduce heat and improve cabin comfort.
Solar control is a coating applied to the windscreen that absorbs the sun's infrared radiation rather than allowing it to pass through into the cabin. This reduces solar heat gain, helping to keep the interior cooler and more comfortable, particularly in warm weather or direct sunlight. The coating is transparent to visible light, so it doesn't darken the windscreen or affect visibility. It's a passive thermal management feature that works continuously whenever the sun is shining on the glass.
Check your vehicle's specification sheet or contact your dealership service centre to confirm whether solar control glass is fitted. Some manufacturers list it as 'solar control windscreen', 'heat-reflective glass', or 'thermal management glass'. It's a factory-fitted feature and won't be visibly obvious from outside the car — the coating is integral to the glass itself.
Solar control glass is a factory-fitted specification. When replacing the windscreen, a solar control variant must be sourced to match the original. This is a standard glass type with no special fitting implications or calibration requirements. Cure and drive-away times follow normal windscreen bonding procedures. Confirm with your fitter that the replacement glass includes solar control to maintain the original thermal performance.
Clear windscreen glass has no tint; most cars have a slight tint as standard.
A clear windscreen contains no added tint layer. Most modern windscreens incorporate a subtle tint (typically blue, green, grey or bronze) as standard to reduce glare, provide UV protection, and improve cabin comfort. A genuinely clear windscreen is the absence of this tint. Clear glass is less common than tinted variants and is sometimes specified for aesthetic or operational reasons, though the tint difference is usually imperceptible to the naked eye.
Lower your side window halfway and hold a white piece of paper behind it. If you see a noticeable colour cast (blue, green, grey or bronze) in the side glass, your windscreen has the same tint. If the side glass appears colourless, your windscreen is likely clear. You can also ask your vehicle's dealership or service centre to confirm the windscreen specification in your service records.
Clear windscreen replacement uses the same installation process as any other windscreen. No special calibration or extended cure time applies. Sourcing is straightforward — clear glass is widely available as an aftermarket replacement. Installation time and drive-away restrictions follow standard windscreen replacement timings. If your vehicle has ADAS features (forward-facing camera or radar), calibration may be required after replacement depending on your specific vehicle; we confirm this when we look up your car details.
Coated windscreens have a blue or purple tint and protect your car from UV rays and heat.
A coated windscreen has a special protective layer applied to the glass that appears as a blue or purple tint and often reflects a silvery-blue colour in bright sunlight. This coating is designed to reduce the amount of ultraviolet (UV) radiation and solar heat that enters the vehicle, helping to keep the interior cooler and protecting upholstery and dashboard components from UV damage and fading. The coating is integral to the glass and doesn't require any special maintenance from you.
Look at your windscreen in bright daylight — a coated windscreen will show a distinct blue or purple tint and a silvery-blue reflection when the sun hits it directly. Check your vehicle's service booklet or window sticker (usually on the driver's door jamb), which may list the glass specification. Alternatively, ask your dealership or service centre to confirm whether your windscreen carries a UV or heat-rejection coating.
When replacing a coated windscreen, the replacement glass must match the original specification — including the coating type and tint level — to maintain the same UV and heat protection and to preserve the vehicle's interior aesthetics. Original-equipment or equivalent aftermarket coated glass is sourced to specification. The coating is applied during glass manufacture; no post-fit treatment is required. Fitting and cure times are unaffected by the presence of the coating.
The moulded trim that surrounds your camera and sensor cluster at the top of the windscreen, typically transferred or supplied with replacement glass.
A bracket for safety features is the moulded plastic or composite shroud that sits at the top of the windscreen, framing and protecting the camera and sensor cluster mounted behind the rear-view mirror. This trim cover houses forward-facing driver-assistance cameras and sensors — equipment that monitors the road ahead for lane-keeping, collision warning, adaptive cruise control, and similar safety functions. The bracket itself is part of the vehicle's structural frame, but the trim cover you see is what protects and aesthetically integrates the technology into the windscreen area.
Look at the top centre of your windscreen, just above or around the rear-view mirror. If you see a dark moulded shroud or trim panel — often rectangular or tapered — with a visible lens or sensor window, your vehicle has a bracket for safety features. Your service history or handbook will list any ADAS (Advanced Driver Assistance System) technologies fitted. Ask your dealer or service centre if your vehicle has forward-facing cameras or sensors; if it does, you have a bracket for safety features.
On windscreen replacement, the trim cover is typically transferred from your old glass to the new one, or supplied pre-integrated with the replacement depending on the variant. This means minimal disruption to your safety system during the swap. However, if the bracket requires recalibration after glass replacement — which depends on your specific vehicle and camera type — the job may require static calibration (using a target board) or dynamic calibration (a road drive). We confirm the exact calibration procedure when we look up your vehicle.
A single camera mounted near the rear-view mirror that helps with lane-keeping and collision avoidance.
A mono camera is a single-lens camera positioned behind the windscreen, typically in the upper centre area near the rear-view mirror. It captures the road ahead and uses computer vision to detect lane markings, vehicles, and road hazards. The camera feeds data to driver-assistance systems such as lane-keeping assist, lane-departure warning, and forward-collision warning. It forms the visual foundation of these safety features, allowing the vehicle to monitor road position and surrounding traffic automatically.
Look in the black trim area above the windscreen, centred behind the rear-view mirror — you will see a small triangular lens assembly or dark lens cover. Check your vehicle handbook or ask your dealer's service department to confirm your model has lane-assistance or collision-warning features; vehicles with these systems almost always have a mono camera. Dashboard warning symbols related to lane or collision systems also indicate the presence of this camera.
When the windscreen is replaced, the camera bracket and lens assembly must be removed and carefully repositioned on the new glass. The camera may require calibration after fitting to ensure accurate road detection and lane recognition. Calibration needs vary by vehicle — we confirm the exact procedure when we look up your specific vehicle. The job may take longer than a standard windscreen replacement, and workshop facilities may be required if calibration demands a controlled environment.
Static calibration uses printed targets indoors to align your forward-facing camera after windscreen replacement.
Static camera calibration is a procedure in which a forward-facing camera system is realigned using printed target boards positioned at manufacturer-specified distances and heights in front of the vehicle. The vehicle remains stationary indoors throughout. A diagnostic tool reads the camera's view of these targets and adjusts the camera's alignment to factory specification. This ensures the camera can accurately detect road features, lane markings, pedestrians, and other objects — critical for driver-assistance systems like lane-keeping, collision warning, and adaptive cruise control to function safely and reliably.
Check your vehicle's handbook or ask your dealer's service centre whether your car has a forward-facing camera system that requires calibration after windscreen replacement. Look for driver-assistance features like lane-keeping assist, autonomous emergency braking, or adaptive cruise control on the dashboard menu. If your vehicle manual mentions 'camera calibration' or 'static target calibration', static calibration is likely part of your windscreen replacement service.
When a windscreen with an integrated or bracket-mounted camera is replaced, the camera's alignment can shift. Static calibration realigns the camera using indoor target boards, which must be performed in a workshop environment where printed targets can be positioned and secured at precise distances. This procedure is conducted after the windscreen is fitted and bonded. The workshop booking accommodates the additional time required for calibration, and we apply the no-split policy — both replacement and calibration happen at the same location on the same visit.
A camera mounted near the rear-view mirror monitors the road ahead for lane-keep and traffic-sign features.
A forward-facing camera positioned in the windscreen header area (typically mounted on or near the rear-view mirror bracket) captures video of the road ahead. This camera feeds data to driver-assistance systems such as lane-departure warning, lane-keep assist, autonomous emergency braking, and traffic-sign recognition. The camera is a core component of modern ADAS (Advanced Driver Assistance Systems) and requires precise alignment after windscreen replacement to ensure these safety features function correctly.
Look for a small dark triangular or lens-shaped component mounted in the black plastic trim area above the windscreen, typically centred near the rear-view mirror or slightly to one side. Your vehicle's handbook or infotainment menu may reference 'Lane Assist', 'Traffic Sign Recognition', or 'Autonomous Emergency Braking'. Ask your dealer or service centre directly if your car is equipped with a forward-facing camera system.
Windscreen replacement on camera-equipped vehicles requires calibration of the camera system after the new glass is fitted. The exact calibration procedure—whether static (using a target board in a controlled environment) or dynamic (road-based)—varies by vehicle make, model, and year. We confirm the precise calibration requirement when we look up your specific vehicle. Calibration ensures lane-keep, sign recognition, and emergency-braking systems function safely. This may extend the fitting schedule and may necessitate workshop-based fitting rather than mobile attendance.
A green-tinted band at the windscreen's top edge that reduces glare from sunlight above.
A green sun strip is a graduated tint band integrated into the windscreen's laminate at the upper edge. It filters intense sunlight and glare from above — particularly useful on motorways and in bright conditions — whilst maintaining clarity through the main viewing area below. The tint is permanent, fused into the laminate layer during manufacture, and cannot be applied or removed afterwards. Sun strips are a windscreen-only feature because they must be built into the laminate during production; side and rear glass cannot carry them as they are typically toughened rather than laminated.
Look at the top edge of your windscreen from the inside. A sun strip appears as a distinct green-tinted gradient band that fades from darker at the very top to clear below. It is visible whether the car is parked or moving. You can also check your vehicle's specification sheet or ask your dealership or current service centre to confirm whether your windscreen includes a sun strip.
The replacement windscreen must be the green sun strip variant to match your original. This is not a post-fit addition; it must be ordered as part of the glass itself. Availability is usually straightforward for current and recent models from major manufacturers, though older or less common variants may require a longer lead time. The sun strip does not affect calibration requirements or cure time — it is simply a laminate feature and does not complicate the fitting process.
Heat-absorbing PVB interlayer reduces solar gain and cabin temperature on warm days—but must match your original spec.
Heat-absorbing PVB is a specially formulated interlayer sandwiched between the glass plies in your windscreen. It absorbs a portion of the sun's infrared radiation before it enters the cabin, reducing solar heat gain on warm days. This keeps the interior cooler and reduces air-conditioning workload. The feature is built into the glass during manufacture and cannot be added or removed after production. If your vehicle left the factory with this interlayer, any replacement windscreen must carry the same PVB specification to maintain the original thermal performance.
Check your vehicle's specification sheet or handbook—heat-absorbing PVB is listed under windscreen or glass specification. You can also ask your dealership service centre or provide us with your vehicle registration; we'll confirm whether your car came with this feature as standard or as an option.
Replacement windscreens with heat-absorbing PVB must be sourced to the exact OE specification—aftermarket alternatives with standard PVB will not deliver the same solar-control performance. We ensure the correct spec is ordered before the fit. No calibration is required. Installation and cure procedures are identical to standard windscreen replacement; the interlayer is integral to the glass and requires no additional treatment.
Heated windscreens use embedded wires to quickly clear ice and condensation in cold weather.
A heated windscreen is integrated with a fine mesh of electrical wires embedded within the glass itself. When activated, these wires generate heat to warm the windscreen surface, helping to rapidly clear frost, ice, and condensation during cold or damp conditions. This feature improves visibility and safety in winter driving and reduces reliance on engine heat and demister air, which can be slower on very cold mornings.
Check your vehicle's handbook or contact your dealership service centre — they can confirm whether your model includes this feature. Look for a dashboard symbol (usually a windscreen icon with heat waves) when you activate the function, or check your infotainment settings for a heating or climate option linked to the windscreen. Some vehicles have a dedicated button on the stalk or console.
Heated windscreens require replacement glass to be of the correct heated specification — standard unheated glass cannot be fitted. The replacement glass must be sourced to match your vehicle's exact heated-wire configuration. Installation is straightforward, though the technician will confirm the heating element is functioning correctly after fitting. No calibration is required for this feature.
The Renault Megane Scenic has been in continuous production since 1997, evolving through multiple generations as a compact family MPV. Over that span, windscreen specifications have shifted significantly — earlier models carry straightforward laminated windscreens, whilst later generations introduced green-tinted glass, rain sensors for automatic wiper activation, and acoustic interlayers for noise reduction on higher-specification trims.
From the early 2010s onwards, some later variants gained solar-control coatings to reduce cabin heat. A small number of newer models are fitted with forward-facing camera systems for driver-assistance features, which require static calibration after windscreen replacement — this is completed at a workshop after the glass is fitted.
Own a different Renault? We've got you — every variant, every year.
The questions customers ask us most often.
