Jason M.
Verified on Trustpilot17 Sept 2026
Great result
After a few challenges, the installation was quick and efficient and the end result is great.
Instant quote for your 2005–2012 Mercedes-Benz GL windscreen in under 60 seconds, fitted by approved fitters — booked in under two minutes.
Make
Mercedes
Model
GL
No card required · Free to quote
Price variation across GL variants reflects differences in glass specification — solar-control coated glass costs more than standard clear or tinted variants due to the additional IR-blocking layer. Earlier models in the 2005–2008 range typically have simpler specifications, whilst later examples from 2009 onwards more frequently feature solar control and may have different gasket engineering. Encapsulation complexity remains consistent across the generation.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2012 | £536 — £536 | 1 variant | Price my 2012 |
| 2011 | £536 — £536 | 1 variant | Price my 2011 |
| 2010 | £536 — £536 | 1 variant | Price my 2010 |
| 2009 | £536 — £536 | 1 variant | Price my 2009 |
| 2008 | £536 — £536 | 1 variant | Price my 2008 |
| 2007 | £533 — £536 | 2 variants | Price my 2007 |
| 2006 | £533 — £536 | 2 variants | Price my 2006 |
| 2005 | £536 — £536 | 1 variant | Price my 2005 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older GLs can still be booked.
Curious why prices vary so widely? Read our UK windscreen replacement cost guide .
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.81/5 from 1,484 Trustpilot reviews.
Booking your GL windscreen through UKCG takes just a few straightforward steps.
Answer a brief online quiz about your model year and trim to identify the exact variant — takes under a minute.
Receive an instant quote tailored to your GL's specification, including any solar-control or tint options.
Choose your preferred fitting date and whether you'd like mobile service at your address or a workshop visit.
A technician from our network will be matched to your job based on your location and availability.
On the fitting day, your fitter will carry out the replacement — typically 45–90 minutes of their time depending on the vehicle — and confirm your drive-away time before leaving.
Enjoy two years of warranty cover on workmanship and glass quality, with support from UKCG if any concerns arise.
From quote to booking takes under two minutes, and your fitted windscreen is backed by a two-year warranty.
The 2005–2012 GL windscreen predates the era of front-mounted ADAS cameras, so no post-fit calibration is required — your replacement can be carried out as mobile service at your address or at a workshop, whichever suits you.
Most GL replacements are straightforward fits. If you prefer the security and convenience of a controlled environment, or if weather conditions make a driveway fit unsuitable, workshop service is always available as an option.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Your wipers automatically activate when rain falls on the windscreen.
A rain sensor is a device mounted on or behind the windscreen that detects moisture and triggers the wiper system automatically. The sensor uses infrared light to measure water droplets on the glass surface and signals the vehicle's electrical system to engage the wipers without driver input. This feature improves safety in sudden downpours and reduces driver workload in variable weather conditions.
Check your windscreen for a small sensor unit, usually mounted near the top centre behind the glass or at the base of the mirror. Look for a small dark component or lens. If your vehicle has automatic wipers that activate without you toggling the stalk, you have a rain sensor. Ask your dealer or service centre to confirm; they can check your vehicle records or wiper module settings.
Rain sensors are non-structural elements and do not require recalibration after windscreen replacement. The sensor bracket or mounting may need careful removal and reinstallation to ensure it sits correctly behind the new glass. If the sensor itself is damaged during removal, a replacement unit may be needed. Your fitter will confirm the condition and refit or replace the sensor as part of the standard replacement procedure.
Solar control glass absorbs infrared rays to reduce heat and improve cabin comfort.
Solar control is a coating applied to the windscreen that absorbs the sun's infrared radiation rather than allowing it to pass through into the cabin. This reduces solar heat gain, helping to keep the interior cooler and more comfortable, particularly in warm weather or direct sunlight. The coating is transparent to visible light, so it doesn't darken the windscreen or affect visibility. It's a passive thermal management feature that works continuously whenever the sun is shining on the glass.
Check your vehicle's specification sheet or contact your dealership service centre to confirm whether solar control glass is fitted. Some manufacturers list it as 'solar control windscreen', 'heat-reflective glass', or 'thermal management glass'. It's a factory-fitted feature and won't be visibly obvious from outside the car — the coating is integral to the glass itself.
Solar control glass is a factory-fitted specification. When replacing the windscreen, a solar control variant must be sourced to match the original. This is a standard glass type with no special fitting implications or calibration requirements. Cure and drive-away times follow normal windscreen bonding procedures. Confirm with your fitter that the replacement glass includes solar control to maintain the original thermal performance.
A printed VIN reference box along the bottom edge of your windscreen helps identify your vehicle's chassis number at a glance.
A VIN (Vehicle Identification Number) notch is a small printed or etched box positioned along the lower edge of the windscreen that displays your vehicle's chassis number. This reference marking is a manufacturing and administrative feature, allowing quick visual identification of the vehicle without needing to consult documents. It's particularly useful for service records, insurance claims, and vehicle registration purposes. The notch itself doesn't affect the structural integrity or safety performance of the glass.
Look along the bottom edge of your windscreen — typically in one of the lower corners — for a small rectangular box containing printed digits or characters. If you're uncertain, check your vehicle's service handbook or ask your dealership or service centre to confirm whether your model includes this feature.
When your windscreen is replaced, the new glass will retain the VIN notch printed or etched by the manufacturer. This is a standard feature on replacement windscreens for compatible vehicles and requires no additional work or adjustment. The notch does not affect glass fitting, cure time, or any post-replacement calibration procedures.
Blue-tinted windscreens reduce glare and heat while maintaining a subtle, modern appearance.
A blue tint is a light coloration applied to the windscreen glass, usually during manufacture. It reduces solar heat transmission and glare from sunlight, particularly on bright days or when driving into the sun. The tint is integral to the glass itself — not a separate film — and is chosen by the vehicle manufacturer to balance comfort, visibility, and aesthetic consistency with the vehicle's side windows and rear window. Most vehicles come with a green or blue tint as standard; the choice depends on the manufacturer's design and regional climate considerations.
Check your side windows by rolling one halfway down and holding a white piece of paper behind the glass. If you see a blue tint reflected in the glass, your windscreen will have the same tint. You can also ask your vehicle's dealership or service centre to confirm the windscreen tint specification. The tint is visible when comparing the windscreen to clear glass, though it may be subtle and harder to spot on overcast days.
Blue-tinted replacement windscreens must match the original tint to maintain visual consistency with your side and rear windows. Most replacement glass is available in the correct tint through OE (original equipment) suppliers. There is no calibration requirement related to tint. The tint does not affect fitting time, cure time, or drive-away schedules. Ensure the replacement windscreen is specified with the blue tint to avoid a mismatched appearance.
Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
The Mercedes-Benz GL is a full-size premium SUV produced from 2005 to 2012 across two generations. All GL windscreens in our catalogue feature encapsulation — a pre-fitted rubber gasket bonded to the glass at the factory, which means your replacement arrives as a complete panel-and-trim unit.
These models are equipped with rain sensors as standard, so the wipers activate automatically in wet conditions. Most variants also carry a VIN notch along the bottom edge of the windscreen, displaying your chassis number. Around two-thirds of GL variants feature solar-control coating, which absorbs infrared rays to reduce cabin heat.
The GL predates the era of front windscreen-mounted ADAS cameras, so replacement is straightforward — no post-fit calibration required. Your fitter will confirm the exact variant and any tint specification (clear, green, or blue-tinted options are available) during the quote process.
Own a different Mercedes? We've got you — every variant, every year.
The questions customers ask us most often.