Instant quote across five Kia Carnival variants from 2001–2012, fitted by approved fitters — booked online in under two minutes.
Make
Kia
Model
Carnival
No card required · Free to quote
Pricing varies depending on which generation and trim level your Carnival is, and whether it carries heated-glass features or rain sensors. Older models without heating elements are typically the most affordable; those with heated windscreens and wiper rest areas carry a modest uplift. The VIN notch, where present, is a minor variant difference. Specialists on our network will confirm the exact specification during the parts check.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2012 | £543 — £543 | 1 variant | Price my 2012 |
| 2011 | £543 — £543 | 1 variant | Price my 2011 |
| 2010 | £543 — £543 | 1 variant | Price my 2010 |
| 2009 | £543 — £543 | 1 variant | Price my 2009 |
| 2008 | £543 — £543 | 1 variant | Price my 2008 |
| 2007 | £543 — £543 | 1 variant | Price my 2007 |
| 2006 | £410 — £543 | 5 variants | Price my 2006 |
| 2005 | £410 — £467 | 3 variants | Price my 2005 |
| 2004 | £410 — £467 | 3 variants | Price my 2004 |
| 2003 | £410 — £429 | 2 variants | Price my 2003 |
| 2002 | £410 — £429 | 2 variants | Price my 2002 |
| 2001 | £410 — £429 | 2 variants | Price my 2001 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older Carnivals can still be booked.
Curious why prices vary so widely? Read our UK windscreen replacement cost guide .
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.82/5 from 1,422 Trustpilot reviews.
Booking your Kia Carnival windscreen replacement through UKCG takes minutes, and the fit itself is usually completed within a couple of hours.
Visit our quote tool and answer a short series of questions about your Carnival's year and features — takes about 60 seconds.
Our parts team verifies your exact glass specification, checking for heated elements, sun strip, and any other features your model carries.
You're matched with an approved fitter near you, available for mobile fitting at your address or workshop collection if you prefer.
On fitting day, your technician removes the old windscreen, clears the frame, and sets your replacement glass with fresh polyurethane adhesive.
You'll be given a minimum drive-away time based on the adhesive used and ambient conditions — typically a few hours.
Your replacement is covered by a two-year warranty against workmanship and glass defects.
From quote to fit, the entire process is designed to be simple and transparent.
All five Carnival variants in the 2001–2012 range can be fitted at your home or workplace as a mobile appointment — there are no ADAS cameras or complex calibration requirements on these models.
Your approved fitter will bring everything needed for a safe, clean replacement. You're welcome to choose a workshop visit instead if that's more convenient, but it's not necessary for this generation.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
A blue-tinted gradient band across the top of your windscreen that reduces glare without affecting your view of the road.
A blue sun strip is a tinted gradient band built into the upper edge of your windscreen's laminate layer. It reduces glare from sunlight reflecting off the road and bonnet without darkening your main field of vision. The tint is created during manufacture as part of the glass laminate itself — it cannot be added or removed later. Sun strips are a windscreen-only feature; rear and side windows cannot carry this effect because they use tempered rather than laminated glass.
Look at the top of your windscreen from inside the car — you'll see a distinct blue-tinted band running horizontally across the upper portion. Check your vehicle's specification sheet or ask your dealership service centre whether your windscreen is listed as a 'blue sun strip' or 'tinted sun strip' variant. Your invoice or parts manual will confirm it.
When replacing a windscreen with a blue sun strip, the replacement must be the sun-strip variant — a standard plain windscreen will not replicate the tinted band. Your replacement glass is sourced as an exact match to your original specification. There are no additional calibration or cure implications beyond a standard windscreen replacement. Fitting and drive-away times remain unchanged.
Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
Heated windscreens use embedded wires to quickly clear ice and condensation in cold weather.
A heated windscreen is integrated with a fine mesh of electrical wires embedded within the glass itself. When activated, these wires generate heat to warm the windscreen surface, helping to rapidly clear frost, ice, and condensation during cold or damp conditions. This feature improves visibility and safety in winter driving and reduces reliance on engine heat and demister air, which can be slower on very cold mornings.
Check your vehicle's handbook or contact your dealership service centre — they can confirm whether your model includes this feature. Look for a dashboard symbol (usually a windscreen icon with heat waves) when you activate the function, or check your infotainment settings for a heating or climate option linked to the windscreen. Some vehicles have a dedicated button on the stalk or console.
Heated windscreens require replacement glass to be of the correct heated specification — standard unheated glass cannot be fitted. The replacement glass must be sourced to match your vehicle's exact heated-wire configuration. Installation is straightforward, though the technician will confirm the heating element is functioning correctly after fitting. No calibration is required for this feature.
Heating elements embedded in the glass melt ice from your wipers and the bottom of your windscreen.
A heated wiper rest area uses electric heating elements embedded into the windscreen in the area where your wipers park when not in use. These elements warm the glass to prevent ice and frost from bonding to the wiper blades and the lower windscreen edge during cold weather. This reduces the effort needed to clear ice in the morning and helps protect your wipers from damage caused by frozen adhesion to the glass.
Check your windscreen's lower edge where the wipers rest — you may see faint heating lines or elements visible in the glass. Your handbook or service history will confirm the feature. You can also ask your dealer or service centre whether your vehicle is equipped with a heated wiper rest area.
When replacing a windscreen with a heated wiper rest area, the replacement glass must include the heating elements. Aftermarket and OE glazing suppliers offer this feature, but availability varies by vehicle. The heating system does not require calibration after replacement, though the technician will ensure the heating element connections are properly restored during installation.
Your wipers automatically activate when rain falls on the windscreen.
A rain sensor is a device mounted on or behind the windscreen that detects moisture and triggers the wiper system automatically. The sensor uses infrared light to measure water droplets on the glass surface and signals the vehicle's electrical system to engage the wipers without driver input. This feature improves safety in sudden downpours and reduces driver workload in variable weather conditions.
Check your windscreen for a small sensor unit, usually mounted near the top centre behind the glass or at the base of the mirror. Look for a small dark component or lens. If your vehicle has automatic wipers that activate without you toggling the stalk, you have a rain sensor. Ask your dealer or service centre to confirm; they can check your vehicle records or wiper module settings.
Rain sensors are non-structural elements and do not require recalibration after windscreen replacement. The sensor bracket or mounting may need careful removal and reinstallation to ensure it sits correctly behind the new glass. If the sensor itself is damaged during removal, a replacement unit may be needed. Your fitter will confirm the condition and refit or replace the sensor as part of the standard replacement procedure.
A printed VIN reference box along the bottom edge of your windscreen helps identify your vehicle's chassis number at a glance.
A VIN (Vehicle Identification Number) notch is a small printed or etched box positioned along the lower edge of the windscreen that displays your vehicle's chassis number. This reference marking is a manufacturing and administrative feature, allowing quick visual identification of the vehicle without needing to consult documents. It's particularly useful for service records, insurance claims, and vehicle registration purposes. The notch itself doesn't affect the structural integrity or safety performance of the glass.
Look along the bottom edge of your windscreen — typically in one of the lower corners — for a small rectangular box containing printed digits or characters. If you're uncertain, check your vehicle's service handbook or ask your dealership or service centre to confirm whether your model includes this feature.
When your windscreen is replaced, the new glass will retain the VIN notch printed or etched by the manufacturer. This is a standard feature on replacement windscreens for compatible vehicles and requires no additional work or adjustment. The notch does not affect glass fitting, cure time, or any post-replacement calibration procedures.
The Kia Carnival has been a spacious family MPV favourite for over two decades, with multiple generations spanning 2001 to 2012 across the UKCG catalogue. Early models feature straightforward laminated windscreens with a blue sun strip — a tinted gradient band across the top that reduces glare without affecting your main sightline.
From the mid-2000s onwards, heated windscreens became more common, alongside heated wiper rest areas to assist with defrosting. Some later variants also added rain sensors for automatic wiper activation. A small number of models feature a VIN notch — a box at the bottom of the windscreen showing your chassis number.
All Carnival windscreens in our catalogue carry green tinting, which is standard across the range. None of the variants in this era require ADAS camera calibration, so fitting is straightforward.
Own a different Kia? We've got you — every variant, every year.
The questions customers ask us most often.
