Daewoo Nubira windscreen replacement booked online in under a minute, fitted by approved fitters across the UK.
Make
Daewoo
Model
Nubira
No card required · Free to quote
Replacement costs reflect generation and trim specification. Earlier Nubiras and base-spec variants are typically the most accessible; models equipped with rain sensors or heated glass carry slightly higher costs due to the additional sensor or heating-element integration. All six variants in our network are well-supplied, so pricing is consistent and predictable.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2011 | £394 — £464 | 4 variants | Price my 2011 |
| 2010 | £394 — £629 | 5 variants | Price my 2010 |
| 2009 | £394 — £629 | 5 variants | Price my 2009 |
| 2008 | £394 — £629 | 5 variants | Price my 2008 |
| 2007 | £394 — £629 | 5 variants | Price my 2007 |
| 2006 | £394 — £629 | 5 variants | Price my 2006 |
| 2005 | £306 — £629 | 6 variants | Price my 2005 |
| 2004 | £306 — £464 | 5 variants | Price my 2004 |
| 2003 | £306 — £414 | 4 variants | Price my 2003 |
| 2002 | £306 — £306 | 1 variant | Price my 2002 |
| 2001 | £306 — £306 | 1 variant | Price my 2001 |
| 2000 | £306 — £306 | 1 variant | Price my 2000 |
| 1999 | £306 — £306 | 1 variant | Price my 1999 |
| 1998 | £306 — £306 | 1 variant | Price my 1998 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older Nubiras can still be booked.
Curious why prices vary so widely? Read our UK windscreen replacement cost guide .
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.82/5 from 1,422 Trustpilot reviews.
Booking a Nubira windscreen replacement is a simple four-step journey.
Answer a short quiz about your model year and features — takes about a minute — and receive an instant quote.
Complete your booking online at a time that suits you; we'll match you with an approved fitter in your area.
The fitter calls ahead to confirm the appointment and checks the exact glass specification when they arrive.
Replacement typically takes 45 to 90 minutes of the fitter's time, depending on the vehicle. Your fitter will confirm the drive-away time before leaving.
Your replacement comes with a two-year warranty covering workmanship and glass quality. If any concerns arise, contact us and we'll arrange a remedy.
From quote to booked appointment, the entire process takes under two minutes.
Daewoo Nubira windscreens are fitted mobile at your address as standard — our approved fitters can come to your home, driveway, or workplace. Since the Nubira predates factory-fitted front-camera ADAS systems, no calibration is required after replacement, so your technician can complete the entire job at one location.
You're welcome to choose a workshop fitting instead if that suits you better — simply let us know at booking, or your fitter can arrange it on your behalf.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
A blue-tinted gradient band across the top of your windscreen that reduces glare without affecting your view of the road.
A blue sun strip is a tinted gradient band built into the upper edge of your windscreen's laminate layer. It reduces glare from sunlight reflecting off the road and bonnet without darkening your main field of vision. The tint is created during manufacture as part of the glass laminate itself — it cannot be added or removed later. Sun strips are a windscreen-only feature; rear and side windows cannot carry this effect because they use tempered rather than laminated glass.
Look at the top of your windscreen from inside the car — you'll see a distinct blue-tinted band running horizontally across the upper portion. Check your vehicle's specification sheet or ask your dealership service centre whether your windscreen is listed as a 'blue sun strip' or 'tinted sun strip' variant. Your invoice or parts manual will confirm it.
When replacing a windscreen with a blue sun strip, the replacement must be the sun-strip variant — a standard plain windscreen will not replicate the tinted band. Your replacement glass is sourced as an exact match to your original specification. There are no additional calibration or cure implications beyond a standard windscreen replacement. Fitting and drive-away times remain unchanged.
Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
An aerial laminated into the windscreen or rear window restores radio, DAB or TV reception without a roof-mounted mast.
An antenna is a conductive print laminated into the glass during manufacture, typically used for radio, DAB (digital audio broadcasting) or television reception. It replaces the traditional roof-mounted aerial mast found on older vehicles. The antenna is integrated into the glass interlayer and connected to the vehicle's receiver unit via a connector embedded in the glass edge. This design offers a cleaner aesthetic, reduces wind noise, and eliminates the vulnerability of a protruding mast to damage or theft.
Check your vehicle's roof — if there is no visible aerial mast, your car likely has a laminated antenna. You can also ask your dealer or service centre whether your windscreen or rear window carries an antenna print. The connector may be visible on the glass edge or inside the door frame trim.
When replacing glass with a laminated antenna, the replacement must carry the matching antenna print and connector to restore reception immediately on fitting. Aftermarket or original-equipment glass with the correct antenna specification is essential; a plain replacement will leave you without radio or DAB signal. Our fitters verify the antenna specification during booking and source the correct variant before the appointment.
Your wipers automatically activate when rain falls on the windscreen.
A rain sensor is a device mounted on or behind the windscreen that detects moisture and triggers the wiper system automatically. The sensor uses infrared light to measure water droplets on the glass surface and signals the vehicle's electrical system to engage the wipers without driver input. This feature improves safety in sudden downpours and reduces driver workload in variable weather conditions.
Check your windscreen for a small sensor unit, usually mounted near the top centre behind the glass or at the base of the mirror. Look for a small dark component or lens. If your vehicle has automatic wipers that activate without you toggling the stalk, you have a rain sensor. Ask your dealer or service centre to confirm; they can check your vehicle records or wiper module settings.
Rain sensors are non-structural elements and do not require recalibration after windscreen replacement. The sensor bracket or mounting may need careful removal and reinstallation to ensure it sits correctly behind the new glass. If the sensor itself is damaged during removal, a replacement unit may be needed. Your fitter will confirm the condition and refit or replace the sensor as part of the standard replacement procedure.
Heated windscreens use embedded wires to quickly clear ice and condensation in cold weather.
A heated windscreen is integrated with a fine mesh of electrical wires embedded within the glass itself. When activated, these wires generate heat to warm the windscreen surface, helping to rapidly clear frost, ice, and condensation during cold or damp conditions. This feature improves visibility and safety in winter driving and reduces reliance on engine heat and demister air, which can be slower on very cold mornings.
Check your vehicle's handbook or contact your dealership service centre — they can confirm whether your model includes this feature. Look for a dashboard symbol (usually a windscreen icon with heat waves) when you activate the function, or check your infotainment settings for a heating or climate option linked to the windscreen. Some vehicles have a dedicated button on the stalk or console.
Heated windscreens require replacement glass to be of the correct heated specification — standard unheated glass cannot be fitted. The replacement glass must be sourced to match your vehicle's exact heated-wire configuration. Installation is straightforward, though the technician will confirm the heating element is functioning correctly after fitting. No calibration is required for this feature.
Heating elements embedded in the glass melt ice from your wipers and the bottom of your windscreen.
A heated wiper rest area uses electric heating elements embedded into the windscreen in the area where your wipers park when not in use. These elements warm the glass to prevent ice and frost from bonding to the wiper blades and the lower windscreen edge during cold weather. This reduces the effort needed to clear ice in the morning and helps protect your wipers from damage caused by frozen adhesion to the glass.
Check your windscreen's lower edge where the wipers rest — you may see faint heating lines or elements visible in the glass. Your handbook or service history will confirm the feature. You can also ask your dealer or service centre whether your vehicle is equipped with a heated wiper rest area.
When replacing a windscreen with a heated wiper rest area, the replacement glass must include the heating elements. Aftermarket and OE glazing suppliers offer this feature, but availability varies by vehicle. The heating system does not require calibration after replacement, though the technician will ensure the heating element connections are properly restored during installation.
The Daewoo Nubira was produced from 1998 to 2011 across multiple generations, serving as a mid-size family saloon and estate during Daewoo's independent brand years. All Nubira windscreens feature a blue sun strip — a tinted gradient band across the top that reduces glare from above without affecting visibility — and a subtle green tint built into the glass itself.
The Nubira spans a long production run with six active variants in our catalogue, reflecting different trim levels and minor specification updates. Half of the variants in circulation carry rain sensors for automatic wiper activation, and a minority feature heated windscreens or heated wiper rest areas for winter defrosting.
Daewoo vehicles of this era predate factory-installed front-camera ADAS systems, so your replacement will not require calibration work — a straightforward fit by a local technician on your driveway.
Own a different Daewoo? We've got you — every variant, every year.
The questions customers ask us most often.
