Instant quote for the Audi SQ6 e-tron windscreen in under 60 seconds, fitted by approved fitters near you — booked in under two minutes.
Make
Audi
Model
SQ6 e-tron
No card required · Free to quote
Price variation on the SQ6 e-tron is minimal because both active variants in our catalogue share the same core glass specification — acoustic lamination, camera bracket, rain sensor, and VIN notch are standard across the range. The only difference is whether a variant includes the optional head-up display, which adds complexity to the windscreen optical geometry and may influence calibration requirements.
CADAS calibration is required on all models and is factored into the fitting cost, so no surprise additional charges apply.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2026 | £833 — £952 | 2 variants | Price my 2026 |
| 2025 | £833 — £952 | 2 variants | Price my 2025 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older SQ6 e-trons can still be booked.
Curious why prices vary so widely? Read our UK windscreen replacement cost guide .
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.81/5 from 1,468 Trustpilot reviews.
Booking your SQ6 e-tron windscreen replacement is straightforward and happens entirely online.
Answer a quick quiz about your SQ6 e-tron — year, trim, and key features — to identify your exact glass spec. This takes about a minute.
See your instant quote and choose a fitting date that suits you — mobile at your address or at a workshop if you prefer.
Our team confirms your glass variant and checks stock availability with our network of technicians.
On the day, your fitter arrives and replaces the windscreen, then completes the static camera calibration to ensure your driver-assistance systems align correctly.
You're given a confirmed drive-away time by the fitter before they leave.
Your replacement is covered by a two-year warranty on workmanship and glass quality.
The whole process, from booking to completion, is hassle-free and backed by our network of trusted local technicians.
All SQ6 e-tron windscreen replacements require static camera calibration after fitting. Because calibration equipment is most reliably accessed at a workshop, most jobs are scheduled at a workshop location rather than mobile at your home.
Your fitter will complete both the glass replacement and calibration in a single visit — typically within a couple of hours — and you'll be given a confirmed drive-away time before they leave. If you'd prefer a mobile appointment and have a technician in the network who can handle calibration on your driveway, this is possible on a case-by-case basis; mention your preference during booking.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Acoustic glass reduces cabin noise for a quieter, more comfortable ride.
Acoustic windscreen glass is laminated with a special acoustic interlayer that absorbs and dampens sound vibrations. It reduces exterior noise—from traffic, wind, and road surface—before it enters the passenger compartment. This makes the cabin noticeably quieter and creates a more peaceful driving experience. It's a comfort feature, not a safety one; standard laminated windscreens already meet impact safety requirements.
Check your windscreen for an ear symbol, the word 'Acoustic', a capital 'A', or the term 'SoundScreen' printed in one of the four corners. These markings indicate acoustic-grade glass. You can also ask your vehicle's dealership or service centre whether your model came fitted with acoustic glass—it's often a factory option on comfort or premium trims.
Acoustic glass is always laminated and bonds to the frame like any standard windscreen, so replacement follows the normal bonded-glass procedure. No specialist calibration is required. The replacement technician will fit it using standard adhesive and sealant. Cure time and drive-away restrictions are identical to standard laminated windscreens. Acoustic glass is widely available as an aftermarket OE-equivalent option.
A camera mounted near the rear-view mirror monitors the road ahead for lane-keep and traffic-sign features.
A forward-facing camera positioned in the windscreen header area (typically mounted on or near the rear-view mirror bracket) captures video of the road ahead. This camera feeds data to driver-assistance systems such as lane-departure warning, lane-keep assist, autonomous emergency braking, and traffic-sign recognition. The camera is a core component of modern ADAS (Advanced Driver Assistance Systems) and requires precise alignment after windscreen replacement to ensure these safety features function correctly.
Look for a small dark triangular or lens-shaped component mounted in the black plastic trim area above the windscreen, typically centred near the rear-view mirror or slightly to one side. Your vehicle's handbook or infotainment menu may reference 'Lane Assist', 'Traffic Sign Recognition', or 'Autonomous Emergency Braking'. Ask your dealer or service centre directly if your car is equipped with a forward-facing camera system.
Windscreen replacement on camera-equipped vehicles requires calibration of the camera system after the new glass is fitted. The exact calibration procedure—whether static (using a target board in a controlled environment) or dynamic (road-based)—varies by vehicle make, model, and year. We confirm the precise calibration requirement when we look up your specific vehicle. Calibration ensures lane-keep, sign recognition, and emergency-braking systems function safely. This may extend the fitting schedule and may necessitate workshop-based fitting rather than mobile attendance.
Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
Your wipers automatically activate when rain falls on the windscreen.
A rain sensor is a device mounted on or behind the windscreen that detects moisture and triggers the wiper system automatically. The sensor uses infrared light to measure water droplets on the glass surface and signals the vehicle's electrical system to engage the wipers without driver input. This feature improves safety in sudden downpours and reduces driver workload in variable weather conditions.
Check your windscreen for a small sensor unit, usually mounted near the top centre behind the glass or at the base of the mirror. Look for a small dark component or lens. If your vehicle has automatic wipers that activate without you toggling the stalk, you have a rain sensor. Ask your dealer or service centre to confirm; they can check your vehicle records or wiper module settings.
Rain sensors are non-structural elements and do not require recalibration after windscreen replacement. The sensor bracket or mounting may need careful removal and reinstallation to ensure it sits correctly behind the new glass. If the sensor itself is damaged during removal, a replacement unit may be needed. Your fitter will confirm the condition and refit or replace the sensor as part of the standard replacement procedure.
A printed VIN reference box along the bottom edge of your windscreen helps identify your vehicle's chassis number at a glance.
A VIN (Vehicle Identification Number) notch is a small printed or etched box positioned along the lower edge of the windscreen that displays your vehicle's chassis number. This reference marking is a manufacturing and administrative feature, allowing quick visual identification of the vehicle without needing to consult documents. It's particularly useful for service records, insurance claims, and vehicle registration purposes. The notch itself doesn't affect the structural integrity or safety performance of the glass.
Look along the bottom edge of your windscreen — typically in one of the lower corners — for a small rectangular box containing printed digits or characters. If you're uncertain, check your vehicle's service handbook or ask your dealership or service centre to confirm whether your model includes this feature.
When your windscreen is replaced, the new glass will retain the VIN notch printed or etched by the manufacturer. This is a standard feature on replacement windscreens for compatible vehicles and requires no additional work or adjustment. The notch does not affect glass fitting, cure time, or any post-replacement calibration procedures.
A Head-Up Display projects your speed, navigation cues and key alerts onto the windscreen so you can read them without looking down.
A Head-Up Display (HUD) projects driving information — speed, navigation cues, ADAS alerts — onto the windscreen in your line of sight, so you can read it without taking your eyes off the road. The projector is mounted in the dashboard and shines the image upwards onto a special HUD-compatible windscreen that uses a wedge-shaped laminate to prevent a ghost image. Common on premium and sports models, increasingly standard on mid-range cars from the 2020s onwards.
Check your vehicle's specification sheet or handbook under 'display features' or 'HUD'. Look for a small projector unit mounted on the dashboard, typically below the steering wheel or in the instrument cluster area. When you start the vehicle, a bright image should appear on the lower windscreen area. Your dealer's service centre can confirm whether your specific model and trim level includes a HUD.
Your replacement windscreen needs to be HUD-compatible — built with the correct wedge laminate so the projected image stays sharp and double-free. Once the HUD-compatible glass is fitted, the projector itself typically doesn't need recalibration: image position is user-adjustable via your dashboard controls. We confirm your vehicle uses the HUD-compatible windscreen variant when ordering, so the replacement matches the original.
The Audi SQ6 e-tron is a brand-new electric performance saloon launched in 2025, built on Audi's PPE (Premium Platform Electric) architecture. From launch, all variants come equipped with advanced driver-assistance features and a front camera system integrated behind the windscreen to support adaptive cruise, active lane assist, and traffic sign recognition.
Every SQ6 e-tron windscreen is laminated with acoustic interlayers to reduce road and wind noise — a standard feature reflecting the model's premium positioning and the quieter running characteristics of its electric powertrain. The windscreen also carries a green tint typical of modern Audi glazing, a rain sensor for automatic wiper activation, and a VIN notch along the bottom edge for identification.
Half of the active variants in our catalogue include a head-up display projecting the speedometer onto the windscreen. Because all SQ6 e-tron models feature camera-dependent ADAS, windscreen replacement requires static camera calibration after fitting — this is completed by the technician as part of the job and does not extend your drive-away time.
Own a different Audi? We've got you — every variant, every year.
The questions customers ask us most often.
