Instant quote across 14 Audi Q3 variants in under 60 seconds, fitted by approved fitters — booked in under two minutes.
Make
Audi
Model
Q3
No card required · Free to quote
Prices vary with generation and ADAS equipment. Early Q3 models without cameras are the most straightforward and typically the most affordable. Mid-generation variants with rain sensors and acoustic glass are mid-range, while newer models equipped with forward cameras and calibration-dependent safety systems carry higher costs due to the specialist calibration work required after fitting.
All variants carry encapsulated trim as standard, meaning the rubber gasket arrives pre-bonded to the glass — your fitter installs the panel as one complete unit.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2026 | £405 — £781 | 9 variants | Price my 2026 |
| 2025 | £405 — £781 | 9 variants | Price my 2025 |
| 2024 | £405 — £781 | 9 variants | Price my 2024 |
| 2023 | £405 — £781 | 9 variants | Price my 2023 |
| 2022 | £405 — £781 | 9 variants | Price my 2022 |
| 2021 | £405 — £781 | 9 variants | Price my 2021 |
| 2020 | £405 — £781 | 9 variants | Price my 2020 |
| 2019 | £405 — £781 | 9 variants | Price my 2019 |
| 2018 | £405 — £781 | 7 variants | Price my 2018 |
| 2017 | £416 — £781 | 4 variants | Price my 2017 |
| 2016 | £416 — £781 | 4 variants | Price my 2016 |
| 2015 | £416 — £781 | 4 variants | Price my 2015 |
| 2014 | £416 — £644 | 2 variants | Price my 2014 |
| 2013 | £416 — £644 | 2 variants | Price my 2013 |
| 2012 | £416 — £644 | 2 variants | Price my 2012 |
| 2011 | £416 — £644 | 2 variants | Price my 2011 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older Q3s can still be booked.
Curious why prices vary so widely? Read our UK windscreen replacement cost guide .
Showing 1 review from verified Audi Q3 owners. Across the whole of UK Car Glass, 4.82/5 from 1,491 Trustpilot reviews.
Booking your Q3 windscreen replacement through UK Car Glass is straightforward and takes just a few minutes online.
Answer a brief quiz about your Q3's year, trim level, and any visible features (cameras, sensors) — this takes about 60 seconds and identifies your exact glass variant.
Receive an instant quote and choose your fitting date and location (mobile at home or at a workshop).
You're matched with a local specialist in your area who will contact you to confirm the booking.
On fitting day, your technician removes the old windscreen, cleans the frame, and bonds the new glass using automotive-grade polyurethane adhesive. For camera-equipped Q3s, static calibration is completed after the glass is set — this runs in parallel with adhesive cure, so it doesn't extend your drive-away time.
Your technician confirms the minimum drive-away time before leaving — typically a few hours depending on the adhesive used and weather conditions.
You're covered by a two-year warranty on workmanship and glass quality, with UKCG support if any issues arise.
The entire process — from online quote to booked appointment — typically takes under two minutes.
Most Q3 windscreen replacements can be done mobile at your home or workplace. However, if your Q3 is equipped with a forward-facing camera (typically on models from 2016 onwards), static camera calibration is required after the glass is fitted.
Calibration must happen at a workshop using printed target boards and a diagnostic tool — it can't be done on a driveway. Your entire job (replacement plus calibration) will be scheduled at a workshop near you, and your technician will confirm the specific location when they call to finalise the booking.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
On the Audi Q3: fitted on every one of the 9 windscreen variants we list; model years 2011–2026.
Acoustic laminated glass dampens road and wind noise, creating a quieter cabin. Look for the word 'Acoustic' or an ear symbol in the corners of your windscreen.
Standard on most Q3 variants from the mid-2010s onwards; confirmed during the quote and parts check.
On the Audi Q3: fitted on every one of the 9 windscreen variants we list; model years 2011–2026.
A subtle green tint built into the glass, almost invisible to the eye, which reduces reflections and cuts glare.
Present on all Q3 windscreens — confirmed during the quote process, not something to inspect yourself.
On the Audi Q3: fitted on every one of the 9 windscreen variants we list; model years 2011–2026; no calibration after replacement.
An infrared sensor embedded in the windscreen that triggers your wipers automatically when rain is detected.
Fitted to most Q3 models from around 2013 onwards; confirmed during the quote.
On the Audi Q3: fitted on every one of the 9 windscreen variants we list; model years 2011–2026.
A small box printed at the bottom of the windscreen showing the vehicle's chassis number for identification and service records.
Present on the vast majority of Q3 variants; confirmed during the parts check.
On the Audi Q3: fitted on 5 of the 9 windscreen variants we list (56%); model years 2015–2026; calibration varies by vehicle.
The moulded trim that surrounds your camera and sensor cluster at the top of the windscreen, typically transferred or supplied with replacement glass.
A bracket for safety features is the moulded plastic or composite shroud that sits at the top of the windscreen, framing and protecting the camera and sensor cluster mounted behind the rear-view mirror. This trim cover houses forward-facing driver-assistance cameras and sensors — equipment that monitors the road ahead for lane-keeping, collision warning, adaptive cruise control, and similar safety functions. The bracket itself is part of the vehicle's structural frame, but the trim cover you see is what protects and aesthetically integrates the technology into the windscreen area.
Look at the top centre of your windscreen, just above or around the rear-view mirror. If you see a dark moulded shroud or trim panel — often rectangular or tapered — with a visible lens or sensor window, your vehicle has a bracket for safety features. Your service history or handbook will list any ADAS (Advanced Driver Assistance System) technologies fitted. Ask your dealer or service centre if your vehicle has forward-facing cameras or sensors; if it does, you have a bracket for safety features.
On windscreen replacement, the trim cover is typically transferred from your old glass to the new one, or supplied pre-integrated with the replacement depending on the variant. This means minimal disruption to your safety system during the swap. However, if the bracket requires recalibration after glass replacement — which depends on your specific vehicle and camera type — the job may require static calibration (using a target board) or dynamic calibration (a road drive). We confirm the exact calibration procedure when we look up your vehicle.
We confirm the exact procedure for your specific vehicle when you book.
On the Audi Q3: fitted on 5 of the 9 windscreen variants we list (56%); model years 2015–2026; calibration varies by vehicle.
A forward-facing camera mounted behind the windscreen that supports Audi pre sense front, active lane assist, traffic sign recognition, and adaptive cruise control.
Found on newer Q3 variants from around 2016–2020 onwards, typically on higher trims. Look for a triangular shape in the black field near the rear-view mirror — your quote will confirm its presence.
We confirm the exact procedure for your specific vehicle when you book.
On the Audi Q3: fitted on 4 of the 9 windscreen variants we list (44%); model years 2011–2026.
Light sensors automatically turn your headlights on at dusk or in tunnels; the replacement windscreen must include the sensor bracket.
A light sensor is a small optical detector mounted on the windscreen or dashboard that monitors ambient light levels. When light drops below a threshold—at dusk or when entering a tunnel—it triggers your headlights to switch on automatically. This removes the need to manually operate the lights and improves safety by ensuring visibility when conditions darken suddenly. The sensor is typically mounted behind the windscreen's top edge or integrated into the interior mirror housing, where it has an unobstructed view of the sky.
Check your vehicle's handbook or ask your dealer whether your car has automatic headlight control or 'auto lights' as a feature. If equipped, you'll see a symbol on the stalk or dashboard dial marked with a light-bulb icon or 'AUTO' setting. When you select this mode and the ambient light dims, the headlights activate without manual input. Not all cars have this feature; it's typically found on newer or higher-specification models.
When replacing a windscreen on a vehicle with a light sensor, the replacement glass must include the correct sensor bracket or mounting point to preserve the auto-headlight function. The sensor itself does not require software calibration—it relies on physical positioning behind the windscreen's upper trim or within the mirror assembly. Ensuring the bracket is correctly installed during the fit is essential; if omitted, the auto-light feature will fail and cannot be restored without additional parts and labour.
On the Audi Q3: fitted on 3 of the 9 windscreen variants we list (33%); model years 2011–2026.
A grey-tinted band across the top of your windscreen that reduces glare from sunlight and reflections above.
A grey sun strip is a tinted gradient band built into the top edge of the windscreen during manufacture. It sits within the laminated glass layers and gradually fades from opaque grey at the very top to clear further down. The strip is designed to reduce glare and reflections from sunlight, street lights, and oncoming headlights, improving comfort and visibility for the driver without obstructing the view of traffic signals or overhead hazards. Sun strips are a factory-applied feature unique to windscreens—they cannot be added to side or rear glass because those are typically toughened rather than laminated.
Look at the top of your windscreen from inside the vehicle. You will see a grey-tinted band that fades to clear glass. The tint is gradual and integral to the glass itself, not a removable film or coating. Your vehicle's service records or handbook may also list it as a standard feature. If unsure, ask your dealer or service centre whether your specific model includes a sun strip.
When replacing a windscreen with a sun strip, the replacement glass must be sourced in the exact matching variant—including the sun-strip tint and fade profile. Aftermarket and OE glass are both available for most vehicles, but the variant must be correct to match your original. There is no calibration required for the sun strip itself. If your windscreen also carries camera or sensor features, those will be calibrated separately according to your vehicle's needs.
On the Audi Q3: fitted on 3 of the 9 windscreen variants we list (33%); model years 2011–2026.
Solar control glass absorbs infrared rays to reduce heat and improve cabin comfort.
Solar control is a coating applied to the windscreen that absorbs the sun's infrared radiation rather than allowing it to pass through into the cabin. This reduces solar heat gain, helping to keep the interior cooler and more comfortable, particularly in warm weather or direct sunlight. The coating is transparent to visible light, so it doesn't darken the windscreen or affect visibility. It's a passive thermal management feature that works continuously whenever the sun is shining on the glass.
Check your vehicle's specification sheet or contact your dealership service centre to confirm whether solar control glass is fitted. Some manufacturers list it as 'solar control windscreen', 'heat-reflective glass', or 'thermal management glass'. It's a factory-fitted feature and won't be visibly obvious from outside the car — the coating is integral to the glass itself.
Solar control glass is a factory-fitted specification. When replacing the windscreen, a solar control variant must be sourced to match the original. This is a standard glass type with no special fitting implications or calibration requirements. Cure and drive-away times follow normal windscreen bonding procedures. Confirm with your fitter that the replacement glass includes solar control to maintain the original thermal performance.
On the Audi Q3: fitted on 2 of the 9 windscreen variants we list (22%); model years 2018–2026; calibration varies by vehicle.
A single camera mounted near the rear-view mirror that helps with lane-keeping and collision avoidance.
A mono camera is a single-lens camera positioned behind the windscreen, typically in the upper centre area near the rear-view mirror. It captures the road ahead and uses computer vision to detect lane markings, vehicles, and road hazards. The camera feeds data to driver-assistance systems such as lane-keeping assist, lane-departure warning, and forward-collision warning. It forms the visual foundation of these safety features, allowing the vehicle to monitor road position and surrounding traffic automatically.
Look in the black trim area above the windscreen, centred behind the rear-view mirror — you will see a small triangular lens assembly or dark lens cover. Check your vehicle handbook or ask your dealer's service department to confirm your model has lane-assistance or collision-warning features; vehicles with these systems almost always have a mono camera. Dashboard warning symbols related to lane or collision systems also indicate the presence of this camera.
When the windscreen is replaced, the camera bracket and lens assembly must be removed and carefully repositioned on the new glass. The camera may require calibration after fitting to ensure accurate road detection and lane recognition. Calibration needs vary by vehicle — we confirm the exact procedure when we look up your specific vehicle. The job may take longer than a standard windscreen replacement, and workshop facilities may be required if calibration demands a controlled environment.
We confirm the exact procedure for your specific vehicle when you book.
On the Audi Q3: fitted on 2 of the 9 windscreen variants we list (22%); model years 2018–2026; static calibration required.
After windscreen replacement, the front camera is recalibrated using printed target boards at a workshop to ensure lane-assist and cruise systems remain accurate and safe.
Required on camera-equipped Q3 models from 2016 onwards. Your technician will arrange this at a workshop as part of the fit — it's included in your booking and runs parallel with glass-adhesive cure.
On the Audi Q3: fitted on 1 of the 9 windscreen variants we list (11%); model years 2018–2026; calibration varies by vehicle.
Heated zones around sensors prevent frost and moisture buildup, helping your safety systems work reliably.
A sensor heated zone is an electrical heating element integrated into or around camera, radar, or sensor mounts on the windscreen. Its purpose is to prevent frost, ice, condensation, and moisture accumulation on sensor lenses and housings. This keeps safety systems — such as lane-keeping assist, collision warning, and adaptive cruise control — functioning accurately in cold, wet, or foggy conditions. Without this heating, moisture or ice can obscure sensors and cause them to malfunction or deactivate.
Check your vehicle's handbook for mention of 'heated sensor zone' or 'sensor heating' in the windscreen or ADAS section. Look at the top edge of your windscreen where cameras or radar modules are mounted — you may see small heating elements or wiring near these components. Ask your dealership or service centre directly: they can confirm whether your specific model includes sensor heating as standard.
Windscreens with heated sensor zones require careful handling during replacement to preserve the heating element and its electrical connections. The heating circuit must be reconnected properly after the new glass is fitted. Depending on the vehicle, this may involve static or dynamic camera calibration after installation. We confirm the exact procedure — including any calibration needs — when we look up your vehicle details.
We confirm the exact procedure for your specific vehicle when you book.
On the Audi Q3: fitted on 1 of the 9 windscreen variants we list (11%); model years 2011–2026.
Emergency messaging systems alert the emergency services immediately after a serious crash, reducing response time.
An emergency messaging system (sometimes called a 'Mayday' system) is an in-vehicle safety feature that automatically detects a serious collision and transmits emergency location data to the relevant emergency services. When a major impact is detected, the system sends the vehicle's precise GPS coordinates and other crash details to emergency responders, reducing the critical time between the accident and the arrival of medical assistance. This technology is designed to save lives by ensuring rapid response, particularly in situations where the occupants may be unconscious or unable to make a call themselves.
Check your vehicle's user manual or infotainment system for emergency call or 'eCall' settings. Many vehicles display an emergency services icon in the dashboard menu or settings. You can also ask your dealership or service centre directly whether your model includes this feature — they'll confirm it's present and explain how to register or activate it if needed.
Emergency messaging systems typically involve a control module or sensors in the vehicle structure, but do not require calibration or special handling during windscreen replacement. The system remains fully functional after glass replacement. No cure-time implications or OE-only glass sourcing is triggered by this feature. Standard replacement procedures apply.
The Audi Q3 has been in continuous production since 2011, evolving through three generations with steadily more advanced driver-assistance features.
Earlier Q3 models carry straightforward laminated windscreens with encapsulated trim and green tint. From the mid-2010s onwards, rain sensors became standard, and acoustic laminated glass appeared on select variants to reduce cabin noise.
From around 2016–2020, front-facing camera systems began appearing on higher-spec Q3s to support Audi pre sense front, active lane assist, and adaptive cruise. These camera-equipped models require static calibration after windscreen replacement, a procedure completed at a workshop with the vehicle stationary.
Own a different Audi? We've got you — every variant, every year.
The questions customers ask us most often.
