Instant quote for your Audi e-Tron GT windscreen in under 60 seconds, fitted by approved fitters across the UK — booked in under two minutes.
Make
Audi
Model
e-Tron GT
No card required · Free to quote
Because every e-Tron GT variant carries the same core glass specification — camera bracket, acoustic laminate, rain sensor, and encapsulation — price variation is minimal across the range. The main cost driver is the static camera calibration required after fitting, which is factored into the overall job cost. Older models (early 2020s) and newer variants are similarly equipped, so generation differences don't significantly affect pricing.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2026 | £862 — £1,290 | 2 variants | Price my 2026 |
| 2025 | £862 — £1,290 | 2 variants | Price my 2025 |
| 2024 | £862 — £1,290 | 2 variants | Price my 2024 |
| 2023 | £862 — £1,290 | 2 variants | Price my 2023 |
| 2022 | £862 — £1,290 | 2 variants | Price my 2022 |
| 2021 | £862 — £1,290 | 2 variants | Price my 2021 |
| 2020 | £1,290 — £1,290 | 1 variant | Price my 2020 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older e-Tron GTs can still be booked.
Curious why prices vary so widely? Read our UK windscreen replacement cost guide .
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.81/5 from 1,468 Trustpilot reviews.
Here's how your e-Tron GT windscreen replacement works from start to finish.
Book online through the widget in under two minutes — answer a few questions about your e-Tron GT and receive an instant quote.
Our parts-check team confirms your exact glass specification, including the camera bracket and acoustic laminate.
We match you with a local specialist technician experienced in Audi ADAS systems.
On fitting day, your technician replaces the windscreen and completes static camera calibration in a workshop environment — the entire job typically takes a couple of hours.
You'll receive a two-year warranty covering workmanship and glass quality, with calibration documented in your job record.
Drive away once your fitter confirms the adhesive cure time and calibration is complete.
From booking to fitting, the process is straightforward and backed by our two-year guarantee.
Every e-Tron GT windscreen replacement requires static camera calibration after fitting — this cannot be done at your home or in a standard mobile setting. Your technician will arrange the job at their workshop, where target boards and diagnostic equipment ensure precise camera alignment for your adaptive cruise and lane-assist systems.
The full job, including calibration, typically completes within a couple of hours. Calibration runs in parallel with adhesive cure, so drive-away time is confirmed by your fitter on the day and is not extended by the calibration work itself.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Acoustic glass reduces cabin noise for a quieter, more comfortable ride.
Acoustic windscreen glass is laminated with a special acoustic interlayer that absorbs and dampens sound vibrations. It reduces exterior noise—from traffic, wind, and road surface—before it enters the passenger compartment. This makes the cabin noticeably quieter and creates a more peaceful driving experience. It's a comfort feature, not a safety one; standard laminated windscreens already meet impact safety requirements.
Check your windscreen for an ear symbol, the word 'Acoustic', a capital 'A', or the term 'SoundScreen' printed in one of the four corners. These markings indicate acoustic-grade glass. You can also ask your vehicle's dealership or service centre whether your model came fitted with acoustic glass—it's often a factory option on comfort or premium trims.
Acoustic glass is always laminated and bonds to the frame like any standard windscreen, so replacement follows the normal bonded-glass procedure. No specialist calibration is required. The replacement technician will fit it using standard adhesive and sealant. Cure time and drive-away restrictions are identical to standard laminated windscreens. Acoustic glass is widely available as an aftermarket OE-equivalent option.
A camera mounted near the rear-view mirror monitors the road ahead for lane-keep and traffic-sign features.
A forward-facing camera positioned in the windscreen header area (typically mounted on or near the rear-view mirror bracket) captures video of the road ahead. This camera feeds data to driver-assistance systems such as lane-departure warning, lane-keep assist, autonomous emergency braking, and traffic-sign recognition. The camera is a core component of modern ADAS (Advanced Driver Assistance Systems) and requires precise alignment after windscreen replacement to ensure these safety features function correctly.
Look for a small dark triangular or lens-shaped component mounted in the black plastic trim area above the windscreen, typically centred near the rear-view mirror or slightly to one side. Your vehicle's handbook or infotainment menu may reference 'Lane Assist', 'Traffic Sign Recognition', or 'Autonomous Emergency Braking'. Ask your dealer or service centre directly if your car is equipped with a forward-facing camera system.
Windscreen replacement on camera-equipped vehicles requires calibration of the camera system after the new glass is fitted. The exact calibration procedure—whether static (using a target board in a controlled environment) or dynamic (road-based)—varies by vehicle make, model, and year. We confirm the precise calibration requirement when we look up your specific vehicle. Calibration ensures lane-keep, sign recognition, and emergency-braking systems function safely. This may extend the fitting schedule and may necessitate workshop-based fitting rather than mobile attendance.
Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
Your wipers automatically activate when rain falls on the windscreen.
A rain sensor is a device mounted on or behind the windscreen that detects moisture and triggers the wiper system automatically. The sensor uses infrared light to measure water droplets on the glass surface and signals the vehicle's electrical system to engage the wipers without driver input. This feature improves safety in sudden downpours and reduces driver workload in variable weather conditions.
Check your windscreen for a small sensor unit, usually mounted near the top centre behind the glass or at the base of the mirror. Look for a small dark component or lens. If your vehicle has automatic wipers that activate without you toggling the stalk, you have a rain sensor. Ask your dealer or service centre to confirm; they can check your vehicle records or wiper module settings.
Rain sensors are non-structural elements and do not require recalibration after windscreen replacement. The sensor bracket or mounting may need careful removal and reinstallation to ensure it sits correctly behind the new glass. If the sensor itself is damaged during removal, a replacement unit may be needed. Your fitter will confirm the condition and refit or replace the sensor as part of the standard replacement procedure.
A printed VIN reference box along the bottom edge of your windscreen helps identify your vehicle's chassis number at a glance.
A VIN (Vehicle Identification Number) notch is a small printed or etched box positioned along the lower edge of the windscreen that displays your vehicle's chassis number. This reference marking is a manufacturing and administrative feature, allowing quick visual identification of the vehicle without needing to consult documents. It's particularly useful for service records, insurance claims, and vehicle registration purposes. The notch itself doesn't affect the structural integrity or safety performance of the glass.
Look along the bottom edge of your windscreen — typically in one of the lower corners — for a small rectangular box containing printed digits or characters. If you're uncertain, check your vehicle's service handbook or ask your dealership or service centre to confirm whether your model includes this feature.
When your windscreen is replaced, the new glass will retain the VIN notch printed or etched by the manufacturer. This is a standard feature on replacement windscreens for compatible vehicles and requires no additional work or adjustment. The notch does not affect glass fitting, cure time, or any post-replacement calibration procedures.
A Head-Up Display projects your speed, navigation cues and key alerts onto the windscreen so you can read them without looking down.
A Head-Up Display (HUD) projects driving information — speed, navigation cues, ADAS alerts — onto the windscreen in your line of sight, so you can read it without taking your eyes off the road. The projector is mounted in the dashboard and shines the image upwards onto a special HUD-compatible windscreen that uses a wedge-shaped laminate to prevent a ghost image. Common on premium and sports models, increasingly standard on mid-range cars from the 2020s onwards.
Check your vehicle's specification sheet or handbook under 'display features' or 'HUD'. Look for a small projector unit mounted on the dashboard, typically below the steering wheel or in the instrument cluster area. When you start the vehicle, a bright image should appear on the lower windscreen area. Your dealer's service centre can confirm whether your specific model and trim level includes a HUD.
Your replacement windscreen needs to be HUD-compatible — built with the correct wedge laminate so the projected image stays sharp and double-free. Once the HUD-compatible glass is fitted, the projector itself typically doesn't need recalibration: image position is user-adjustable via your dashboard controls. We confirm your vehicle uses the HUD-compatible windscreen variant when ordering, so the replacement matches the original.
The Audi e-Tron GT is a high-performance electric grand tourer launched in 2020, built on Audi's premium MLB Evo platform. Its windscreen is a sophisticated piece of engineering — laminated, green-tinted, and equipped with an integrated rain sensor for automatic wiper activation.
From launch, every e-Tron GT variant has carried a front-facing camera mounted behind the windscreen to support Audi's driver assistance systems, including adaptive cruise assist and active lane assist. This means windscreen replacement requires static camera calibration after fitting, a procedure that must be completed in a controlled workshop environment to ensure accurate sensor alignment.
The windscreen also features acoustic laminated glass as standard across all variants, designed to reduce road and wind noise and enhance the premium cabin experience. An encapsulated edge seal comes pre-fitted at the factory, so replacement is a full panel-plus-trim unit.
Own a different Audi? We've got you — every variant, every year.
The questions customers ask us most often.
