Mazda RX8 rear window replacement — instant quote for all 2003–2008 variants, fitted by approved fitters near you.
Make
Mazda
Model
RX8
No card required · Free to quote
Rear window replacement cost for the RX8 varies slightly depending on the specific variant and local technician sourcing. Because the RX8 is a single-generation model with consistent rear-glass specifications, price variation is minimal—chiefly driven by the encapsulated gasket complexity and toughened-glass sourcing. Specialist technicians in your area will confirm the exact figure during the quote.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2008 | £808 — £808 | 1 variant | Price my 2008 |
| 2007 | £808 — £808 | 1 variant | Price my 2007 |
| 2006 | £808 — £808 | 1 variant | Price my 2006 |
| 2005 | £808 — £808 | 1 variant | Price my 2005 |
| 2004 | £808 — £808 | 1 variant | Price my 2004 |
| 2003 | £808 — £808 | 1 variant | Price my 2003 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older RX8s can still be booked.
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.82/5 from 1,422 Trustpilot reviews.
Rear window replacement is straightforward and typically completes in under two hours from start to finish.
Complete a quick online quote using our guided widget—takes about a minute and covers your RX8's year, trim, and features.
We match you with an approved fitter near you and confirm a time that suits your schedule.
Before the job, our parts team verify that your replacement glass matches your factory specification—same encapsulation type, same green tint.
On fitting day, your technician removes the shattered original glass, clears accessible shards from the interior, and bonds the new encapsulated panel into place using factory-approved adhesive.
After fitting, we recommend a professional interior valet to remove any fine glass particles that may have lodged in areas the fitter can't easily reach during the replacement.
Your new rear window is covered by a two-year warranty on workmanship and glass quality.
Book online in under two minutes, or contact us if you'd prefer to discuss the job first.
Rear window replacement for the RX8 is typically mobile—your fitter can visit your home, workplace, or any convenient location to complete the job. Because there is no camera system or ADAS calibration associated with the rear window on this model, workshop access is not required.
If weather is poor or your location has restricted access, your technician may suggest a workshop visit instead; this is optional and will be discussed when your booking is confirmed.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Factory-bonded rubber or polymer trim means your replacement glass arrives ready to fit as one complete unit.
Encapsulation is a rubber or polymer gasket moulded directly onto the glass edges during manufacturing. The trim is bonded to the glass at the factory — either by injection moulding, PU robot extrusion, or adhesive bonding. When you need a replacement, the entire panel arrives with its trim already attached, so the glass and gasket are replaced together as a single unit rather than as separate components.
Check your current windscreen or rear window edges. If you see a continuous rubber or polymer seal running around the perimeter that appears moulded or permanently bonded to the glass itself — rather than a separate trim clipped or screwed to the frame — your glass is encapsulated. Ask your dealer or service centre to confirm; they can also check your vehicle specification sheet.
Encapsulated glass simplifies replacement because there's no separate trim to remove, refit, or source. The bonded gasket is replaced as part of the glass unit, which reduces installation complexity and potential leak points. Cure time and drive-away procedures remain unchanged. No additional sourcing delays — encapsulated replacements are stocked as complete assemblies by most suppliers.
Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
The Mazda RX8 was produced from 2003 to 2008 as a unique four-door sports car with rear-hinged back doors. Its rear window is a fixed pane of toughened glass, sealed into the bodywork and integral to the vehicle's structure.
All RX8 variants in our catalogue carry an encapsulated rubber gasket pre-bonded to the glass edges at the factory. This means the replacement panel arrives with its trim already attached—your fitter installs the glass-and-gasket as a single sealed unit, ensuring a tight factory-spec fit.
The rear glass features a subtle green tint, consistent across all production years. This is a subtle factory tint applied during manufacture and is standard to the model.
Own a different Mazda? We've got you — every variant, every year.
The questions customers ask us most often.
