Instant quote for your SsangYong Tivoli windscreen in under 60 seconds, fitted by approved fitters near you — booked in under two minutes.
Make
SsangYong
Model
Tivoli
No card required · Free to quote
Pricing for Tivoli windscreen replacement reflects the camera-equipped specification standard across the range, which adds calibration to the job scope. Older variants may carry slightly different equipment, so the exact cost depends on which year and specification your Tivoli carries.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2026 | £801 — £801 | 1 variant | Price my 2026 |
| 2025 | £801 — £801 | 1 variant | Price my 2025 |
| 2024 | £801 — £801 | 1 variant | Price my 2024 |
| 2023 | £801 — £801 | 1 variant | Price my 2023 |
| 2022 | £801 — £801 | 1 variant | Price my 2022 |
| 2021 | £801 — £801 | 1 variant | Price my 2021 |
| 2020 | £801 — £801 | 1 variant | Price my 2020 |
| 2019 | £801 — £801 | 1 variant | Price my 2019 |
| 2018 | £801 — £801 | 1 variant | Price my 2018 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older Tivolis can still be booked.
Curious why prices vary so widely? Read our UK windscreen replacement cost guide .
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.82/5 from 1,456 Trustpilot reviews.
Replacing your windscreen follows a simple, transparent process from quote through to fitting day.
Get an instant quote through our online widget by answering a few quick questions about your Tivoli — takes under a minute.
Complete your booking securely online, choosing a date and location that suits you.
We match you with a specialist fitter in your area and carry out a parts verification check to confirm your exact glass specification.
Your fitter arrives at your chosen location (mobile at home or at a workshop), removes the old windscreen, and installs your new glass — typically within a couple of hours including any camera calibration.
Your fitter confirms your drive-away time before leaving, based on the adhesive used and weather conditions.
You're covered by a two-year warranty on workmanship and glass quality; contact us if any concerns arise.
From quote to completion, the entire service is transparent and backed by reviews from thousands of satisfied drivers.
Most Tivoli windscreen replacements can be done at your home or workplace as a mobile visit. However, because your Tivoli carries a front camera system for driver assistance, calibration is typically required after the glass is fitted.
Depending on your fitter's equipment, this calibration may be completed mobile or may require a workshop visit. Your specialist will confirm the location when they contact you after booking.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
A single camera mounted near the rear-view mirror that helps with lane-keeping and collision avoidance.
A mono camera is a single-lens camera positioned behind the windscreen, typically in the upper centre area near the rear-view mirror. It captures the road ahead and uses computer vision to detect lane markings, vehicles, and road hazards. The camera feeds data to driver-assistance systems such as lane-keeping assist, lane-departure warning, and forward-collision warning. It forms the visual foundation of these safety features, allowing the vehicle to monitor road position and surrounding traffic automatically.
Look in the black trim area above the windscreen, centred behind the rear-view mirror — you will see a small triangular lens assembly or dark lens cover. Check your vehicle handbook or ask your dealer's service department to confirm your model has lane-assistance or collision-warning features; vehicles with these systems almost always have a mono camera. Dashboard warning symbols related to lane or collision systems also indicate the presence of this camera.
When the windscreen is replaced, the camera bracket and lens assembly must be removed and carefully repositioned on the new glass. The camera may require calibration after fitting to ensure accurate road detection and lane recognition. Calibration needs vary by vehicle — we confirm the exact procedure when we look up your specific vehicle. The job may take longer than a standard windscreen replacement, and workshop facilities may be required if calibration demands a controlled environment.
Your wipers automatically activate when rain falls on the windscreen.
A rain sensor is a device mounted on or behind the windscreen that detects moisture and triggers the wiper system automatically. The sensor uses infrared light to measure water droplets on the glass surface and signals the vehicle's electrical system to engage the wipers without driver input. This feature improves safety in sudden downpours and reduces driver workload in variable weather conditions.
Check your windscreen for a small sensor unit, usually mounted near the top centre behind the glass or at the base of the mirror. Look for a small dark component or lens. If your vehicle has automatic wipers that activate without you toggling the stalk, you have a rain sensor. Ask your dealer or service centre to confirm; they can check your vehicle records or wiper module settings.
Rain sensors are non-structural elements and do not require recalibration after windscreen replacement. The sensor bracket or mounting may need careful removal and reinstallation to ensure it sits correctly behind the new glass. If the sensor itself is damaged during removal, a replacement unit may be needed. Your fitter will confirm the condition and refit or replace the sensor as part of the standard replacement procedure.
Solar control glass absorbs infrared rays to reduce heat and improve cabin comfort.
Solar control is a coating applied to the windscreen that absorbs the sun's infrared radiation rather than allowing it to pass through into the cabin. This reduces solar heat gain, helping to keep the interior cooler and more comfortable, particularly in warm weather or direct sunlight. The coating is transparent to visible light, so it doesn't darken the windscreen or affect visibility. It's a passive thermal management feature that works continuously whenever the sun is shining on the glass.
Check your vehicle's specification sheet or contact your dealership service centre to confirm whether solar control glass is fitted. Some manufacturers list it as 'solar control windscreen', 'heat-reflective glass', or 'thermal management glass'. It's a factory-fitted feature and won't be visibly obvious from outside the car — the coating is integral to the glass itself.
Solar control glass is a factory-fitted specification. When replacing the windscreen, a solar control variant must be sourced to match the original. This is a standard glass type with no special fitting implications or calibration requirements. Cure and drive-away times follow normal windscreen bonding procedures. Confirm with your fitter that the replacement glass includes solar control to maintain the original thermal performance.
The SsangYong Tivoli has been a practical compact SUV choice since 2015, offering straightforward family motoring with a robust build. From 2018 onwards, Tivoli windscreens come equipped with a green-tinted coating designed to reduce solar heat and glare, combined with a front camera system for driver assistance features.
This modern glass specification means your replacement will include rain-sensing technology and solar-control properties as standard. Your replacement matches this factory specification and is UK-approved for the road.
Own a different SsangYong? We've got you — every variant, every year.
The questions customers ask us most often.
