Instant quote for your Mini Paceman windscreen in under 60 seconds, fitted by approved fitters in your area — booked in under two minutes.
Make
Mini
Model
Paceman
No card required · Free to quote
Replacement cost varies with your specific variant — heated-windscreen models and those with rain sensors typically carry slightly higher replacement costs due to the additional components and wiring involved. Early-model Pacemans (2013–2014) without these premium features are generally the most affordable to replace.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2016 | £582 — £703 | 3 variants | Price my 2016 |
| 2015 | £582 — £703 | 3 variants | Price my 2015 |
| 2014 | £582 — £703 | 3 variants | Price my 2014 |
| 2013 | £582 — £703 | 3 variants | Price my 2013 |
| 2012 | £582 — £703 | 3 variants | Price my 2012 |
| 2011 | £582 — £703 | 3 variants | Price my 2011 |
| 2010 | £582 — £703 | 3 variants | Price my 2010 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older Pacemans can still be booked.
Curious why prices vary so widely? Read our UK windscreen replacement cost guide .
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.82/5 from 1,422 Trustpilot reviews.
Booking your Paceman windscreen replacement takes just a few steps.
Complete an instant online quote using our guided tool — takes about a minute and covers your exact variant.
Review the quote and proceed to secure your booking in under two minutes via the checkout.
Our parts team verify your glass specification and confirm availability.
You're matched with an approved fitter near you; mobile replacement at your address is the default, or you can choose a workshop visit.
Your fitter arrives with your glass, completes the replacement (typically 45–90 minutes of their time depending on your variant), and confirms the drive-away time before leaving.
You're covered by a two-year warranty on workmanship and glass quality.
Full support from booking to completion — UKCG coordinates every step, and your fitter handles the fitting.
Most Paceman windscreen replacements are fitted mobile at your address — the default option. Because the 2013–2016 Paceman range does not include forward-facing camera systems, ADAS calibration is never required, so there's no calibration-related workshop constraint.
Choose a workshop visit if you prefer, or if weather conditions on the day make mobile fitting impractical. Your fitter discusses the best option when you're matched.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Factory-bonded rubber or polymer trim means your replacement glass arrives ready to fit as one complete unit.
Encapsulation is a rubber or polymer gasket moulded directly onto the glass edges during manufacturing. The trim is bonded to the glass at the factory — either by injection moulding, PU robot extrusion, or adhesive bonding. When you need a replacement, the entire panel arrives with its trim already attached, so the glass and gasket are replaced together as a single unit rather than as separate components.
Check your current windscreen or rear window edges. If you see a continuous rubber or polymer seal running around the perimeter that appears moulded or permanently bonded to the glass itself — rather than a separate trim clipped or screwed to the frame — your glass is encapsulated. Ask your dealer or service centre to confirm; they can also check your vehicle specification sheet.
Encapsulated glass simplifies replacement because there's no separate trim to remove, refit, or source. The bonded gasket is replaced as part of the glass unit, which reduces installation complexity and potential leak points. Cure time and drive-away procedures remain unchanged. No additional sourcing delays — encapsulated replacements are stocked as complete assemblies by most suppliers.
Pre-fitted clips and brackets that secure the glass to your vehicle, supplied ready to bond as a complete unit.
Fitting hardware comprises the clips, brackets, mouldings and adhesive retention components that hold the glass securely in place on your vehicle's frame. When your replacement glass is supplied with fitting hardware pre-attached, it arrives as a ready-to-install assembly rather than as bare glass requiring separate hardware attachment during the fit. This streamlines the replacement process and ensures correct positioning and fitment.
Check your vehicle's service history or contact your dealership service department with your registration number. They can confirm whether your glass comes with pre-fitted hardware as standard. Visually, pre-fitted hardware appears as clips or brackets already bonded or attached to the glass edges before it reaches the fitting technician.
Glass supplied with pre-fitted hardware typically requires no additional labour to attach clips or brackets during the fit, reducing technician time at the vehicle. The hardware must be in good condition and correctly positioned for the glass to seal and function properly. If hardware is damaged during removal of the old glass, replacement or repair of that hardware may be needed before the new glass can be fitted securely.
Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
Solar control glass absorbs infrared rays to reduce heat and improve cabin comfort.
Solar control is a coating applied to the windscreen that absorbs the sun's infrared radiation rather than allowing it to pass through into the cabin. This reduces solar heat gain, helping to keep the interior cooler and more comfortable, particularly in warm weather or direct sunlight. The coating is transparent to visible light, so it doesn't darken the windscreen or affect visibility. It's a passive thermal management feature that works continuously whenever the sun is shining on the glass.
Check your vehicle's specification sheet or contact your dealership service centre to confirm whether solar control glass is fitted. Some manufacturers list it as 'solar control windscreen', 'heat-reflective glass', or 'thermal management glass'. It's a factory-fitted feature and won't be visibly obvious from outside the car — the coating is integral to the glass itself.
Solar control glass is a factory-fitted specification. When replacing the windscreen, a solar control variant must be sourced to match the original. This is a standard glass type with no special fitting implications or calibration requirements. Cure and drive-away times follow normal windscreen bonding procedures. Confirm with your fitter that the replacement glass includes solar control to maintain the original thermal performance.
A printed VIN reference box along the bottom edge of your windscreen helps identify your vehicle's chassis number at a glance.
A VIN (Vehicle Identification Number) notch is a small printed or etched box positioned along the lower edge of the windscreen that displays your vehicle's chassis number. This reference marking is a manufacturing and administrative feature, allowing quick visual identification of the vehicle without needing to consult documents. It's particularly useful for service records, insurance claims, and vehicle registration purposes. The notch itself doesn't affect the structural integrity or safety performance of the glass.
Look along the bottom edge of your windscreen — typically in one of the lower corners — for a small rectangular box containing printed digits or characters. If you're uncertain, check your vehicle's service handbook or ask your dealership or service centre to confirm whether your model includes this feature.
When your windscreen is replaced, the new glass will retain the VIN notch printed or etched by the manufacturer. This is a standard feature on replacement windscreens for compatible vehicles and requires no additional work or adjustment. The notch does not affect glass fitting, cure time, or any post-replacement calibration procedures.
Your wipers automatically activate when rain falls on the windscreen.
A rain sensor is a device mounted on or behind the windscreen that detects moisture and triggers the wiper system automatically. The sensor uses infrared light to measure water droplets on the glass surface and signals the vehicle's electrical system to engage the wipers without driver input. This feature improves safety in sudden downpours and reduces driver workload in variable weather conditions.
Check your windscreen for a small sensor unit, usually mounted near the top centre behind the glass or at the base of the mirror. Look for a small dark component or lens. If your vehicle has automatic wipers that activate without you toggling the stalk, you have a rain sensor. Ask your dealer or service centre to confirm; they can check your vehicle records or wiper module settings.
Rain sensors are non-structural elements and do not require recalibration after windscreen replacement. The sensor bracket or mounting may need careful removal and reinstallation to ensure it sits correctly behind the new glass. If the sensor itself is damaged during removal, a replacement unit may be needed. Your fitter will confirm the condition and refit or replace the sensor as part of the standard replacement procedure.
Heated windscreens use embedded wires to quickly clear ice and condensation in cold weather.
A heated windscreen is integrated with a fine mesh of electrical wires embedded within the glass itself. When activated, these wires generate heat to warm the windscreen surface, helping to rapidly clear frost, ice, and condensation during cold or damp conditions. This feature improves visibility and safety in winter driving and reduces reliance on engine heat and demister air, which can be slower on very cold mornings.
Check your vehicle's handbook or contact your dealership service centre — they can confirm whether your model includes this feature. Look for a dashboard symbol (usually a windscreen icon with heat waves) when you activate the function, or check your infotainment settings for a heating or climate option linked to the windscreen. Some vehicles have a dedicated button on the stalk or console.
Heated windscreens require replacement glass to be of the correct heated specification — standard unheated glass cannot be fitted. The replacement glass must be sourced to match your vehicle's exact heated-wire configuration. Installation is straightforward, though the technician will confirm the heating element is functioning correctly after fitting. No calibration is required for this feature.
Factory-fitted brackets and mounts bonded to the glass, pre-assembled and ready to fit without sub-assembly.
Other Hardware refers to factory-fitted brackets, mounts, connectors, or trim pieces bonded permanently to the windscreen or other glass during manufacturing. These are integral to the vehicle's design but do not activate or control a specific feature — they simply secure or position components like sensors, trim strips, or mounting points. Unlike feature-specific hardware, these items are passive structural elements. A replacement carrying Other Hardware arrives pre-bonded and ready to install without additional assembly or modification.
Check your vehicle documentation or ask your dealership service centre whether your windscreen or glass panel carries factory-bonded brackets or mounts. Visual inspection may reveal trim strips, sensor housings, or antenna mounts bonded to the edges or interior surface of the glass. Your original invoice or parts list will specify if Other Hardware is present.
Replacement glass carrying Other Hardware must be sourced as a complete assembly — the brackets and mounts come pre-bonded from the supplier and cannot be transferred from the old glass. Installation is straightforward: the fitter removes the old glass and fits the replacement with its hardware already in place. No additional sub-assembly, bonding, or recalibration of the hardware itself is required. Fitting time is unaffected.
The Mini Paceman was produced from 2013 to 2016 as a compact crossover variant of the Mini Countryman, built on the same platform. All Paceman windscreens come with green-tinted laminated glass, encapsulated trim, and a VIN notch as standard.
Two-thirds of Paceman variants include a rain sensor for automatic wiper activation, while around one-third feature a heated windscreen for winter demisting. Solar-control glass is fitted across the range to reduce cabin heat from infrared rays.
None of the 2013–2016 Paceman variants carry the forward-facing camera systems that appeared on later Mini models, so windscreen replacement does not require ADAS recalibration — a straightforward fit without the calibration step.
Own a different Mini? We've got you — every variant, every year.
The questions customers ask us most often.
