Instant quote across 13 Mercedes M-Class variants in under 60 seconds, fitted by approved fitters — booked in under two minutes.
Make
Mercedes
Model
M Class
No card required · Free to quote
Price variation reflects the generation split and ADAS complexity. Earlier M-Class models without cameras are typically more affordable, whilst 2022+ variants with the Driver Assistance Package and integrated camera systems carry higher calibration costs. Solar-control and acoustic glass options on premium trims also influence the final quote.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2026 | £431 — £795 | 6 variants | Price my 2026 |
| 2025 | £431 — £795 | 6 variants | Price my 2025 |
| 2024 | £431 — £795 | 6 variants | Price my 2024 |
| 2023 | £431 — £795 | 6 variants | Price my 2023 |
| 2022 | £431 — £795 | 6 variants | Price my 2022 |
| 2021 | £431 — £795 | 6 variants | Price my 2021 |
| 2020 | £431 — £795 | 6 variants | Price my 2020 |
| 2019 | £431 — £795 | 6 variants | Price my 2019 |
| 2018 | £431 — £795 | 6 variants | Price my 2018 |
| 2017 | £431 — £795 | 6 variants | Price my 2017 |
| 2016 | £431 — £795 | 6 variants | Price my 2016 |
| 2015 | £431 — £795 | 6 variants | Price my 2015 |
| 2014 | £431 — £795 | 6 variants | Price my 2014 |
| 2013 | £431 — £795 | 6 variants | Price my 2013 |
| 2012 | £431 — £795 | 8 variants | Price my 2012 |
| 2011 | £431 — £795 | 8 variants | Price my 2011 |
| 2010 | £580 — £613 | 2 variants | Price my 2010 |
| 2009 | £580 — £613 | 2 variants | Price my 2009 |
| 2008 | £580 — £613 | 2 variants | Price my 2008 |
| 2007 | £569 — £613 | 3 variants | Price my 2007 |
| 2006 | £569 — £613 | 3 variants | Price my 2006 |
| 2005 | £338 — £613 | 5 variants | Price my 2005 |
| 2004 | £338 — £505 | 3 variants | Price my 2004 |
| 2003 | £338 — £505 | 3 variants | Price my 2003 |
| 2002 | £338 — £505 | 3 variants | Price my 2002 |
| 2001 | £338 — £505 | 3 variants | Price my 2001 |
| 2000 | £338 — £505 | 3 variants | Price my 2000 |
| 1999 | £338 — £494 | 3 variants | Price my 1999 |
| 1998 | £338 — £484 | 2 variants | Price my 1998 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older M Classs can still be booked.
Curious why prices vary so widely? Read our UK windscreen replacement cost guide .
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.82/5 from 1,456 Trustpilot reviews.
Booking through UK Car Glass is straightforward and takes just a couple of minutes.
Use our guided widget to select your M-Class variant — the quiz identifies your exact windscreen specification based on year, trim, and features in around 60 seconds.
Confirm your preferred appointment date and location (mobile visit or workshop, if available in your area).
Our parts-check team verifies the glass matches your factory spec once you've booked.
A technician in our network is matched to your job and contacts you to confirm the appointment.
On the day, the technician fits your replacement windscreen — typically 45–90 minutes for non-ADAS models, longer if static camera calibration is required.
If your M-Class has the Driver Assistance Package and a windscreen camera, calibration is completed at a workshop before you drive away; your fitter confirms the exact drive-away time.
All replacements come with a two-year warranty covering workmanship and glass quality.
Most M-Class windscreen replacements can be done at your home or work as a mobile visit. However, if your model includes a forward-facing camera for driver assistance (typically 2022+ variants with the Driver Assistance Package), the job is scheduled at a workshop so static calibration can be completed safely in a controlled environment.
We never split the job across locations — replacement and calibration happen together at one location on one day. Your fitter confirms the exact drive-away time before you leave; calibration runs in parallel with adhesive cure, so it doesn't extend the time you wait.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
A printed VIN reference box along the bottom edge of your windscreen helps identify your vehicle's chassis number at a glance.
A VIN (Vehicle Identification Number) notch is a small printed or etched box positioned along the lower edge of the windscreen that displays your vehicle's chassis number. This reference marking is a manufacturing and administrative feature, allowing quick visual identification of the vehicle without needing to consult documents. It's particularly useful for service records, insurance claims, and vehicle registration purposes. The notch itself doesn't affect the structural integrity or safety performance of the glass.
Look along the bottom edge of your windscreen — typically in one of the lower corners — for a small rectangular box containing printed digits or characters. If you're uncertain, check your vehicle's service handbook or ask your dealership or service centre to confirm whether your model includes this feature.
When your windscreen is replaced, the new glass will retain the VIN notch printed or etched by the manufacturer. This is a standard feature on replacement windscreens for compatible vehicles and requires no additional work or adjustment. The notch does not affect glass fitting, cure time, or any post-replacement calibration procedures.
Your wipers automatically activate when rain falls on the windscreen.
A rain sensor is a device mounted on or behind the windscreen that detects moisture and triggers the wiper system automatically. The sensor uses infrared light to measure water droplets on the glass surface and signals the vehicle's electrical system to engage the wipers without driver input. This feature improves safety in sudden downpours and reduces driver workload in variable weather conditions.
Check your windscreen for a small sensor unit, usually mounted near the top centre behind the glass or at the base of the mirror. Look for a small dark component or lens. If your vehicle has automatic wipers that activate without you toggling the stalk, you have a rain sensor. Ask your dealer or service centre to confirm; they can check your vehicle records or wiper module settings.
Rain sensors are non-structural elements and do not require recalibration after windscreen replacement. The sensor bracket or mounting may need careful removal and reinstallation to ensure it sits correctly behind the new glass. If the sensor itself is damaged during removal, a replacement unit may be needed. Your fitter will confirm the condition and refit or replace the sensor as part of the standard replacement procedure.
Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
Heated windscreens use embedded wires to quickly clear ice and condensation in cold weather.
A heated windscreen is integrated with a fine mesh of electrical wires embedded within the glass itself. When activated, these wires generate heat to warm the windscreen surface, helping to rapidly clear frost, ice, and condensation during cold or damp conditions. This feature improves visibility and safety in winter driving and reduces reliance on engine heat and demister air, which can be slower on very cold mornings.
Check your vehicle's handbook or contact your dealership service centre — they can confirm whether your model includes this feature. Look for a dashboard symbol (usually a windscreen icon with heat waves) when you activate the function, or check your infotainment settings for a heating or climate option linked to the windscreen. Some vehicles have a dedicated button on the stalk or console.
Heated windscreens require replacement glass to be of the correct heated specification — standard unheated glass cannot be fitted. The replacement glass must be sourced to match your vehicle's exact heated-wire configuration. Installation is straightforward, though the technician will confirm the heating element is functioning correctly after fitting. No calibration is required for this feature.
Heating elements embedded in the glass melt ice from your wipers and the bottom of your windscreen.
A heated wiper rest area uses electric heating elements embedded into the windscreen in the area where your wipers park when not in use. These elements warm the glass to prevent ice and frost from bonding to the wiper blades and the lower windscreen edge during cold weather. This reduces the effort needed to clear ice in the morning and helps protect your wipers from damage caused by frozen adhesion to the glass.
Check your windscreen's lower edge where the wipers rest — you may see faint heating lines or elements visible in the glass. Your handbook or service history will confirm the feature. You can also ask your dealer or service centre whether your vehicle is equipped with a heated wiper rest area.
When replacing a windscreen with a heated wiper rest area, the replacement glass must include the heating elements. Aftermarket and OE glazing suppliers offer this feature, but availability varies by vehicle. The heating system does not require calibration after replacement, though the technician will ensure the heating element connections are properly restored during installation.
Solar control glass absorbs infrared rays to reduce heat and improve cabin comfort.
Solar control is a coating applied to the windscreen that absorbs the sun's infrared radiation rather than allowing it to pass through into the cabin. This reduces solar heat gain, helping to keep the interior cooler and more comfortable, particularly in warm weather or direct sunlight. The coating is transparent to visible light, so it doesn't darken the windscreen or affect visibility. It's a passive thermal management feature that works continuously whenever the sun is shining on the glass.
Check your vehicle's specification sheet or contact your dealership service centre to confirm whether solar control glass is fitted. Some manufacturers list it as 'solar control windscreen', 'heat-reflective glass', or 'thermal management glass'. It's a factory-fitted feature and won't be visibly obvious from outside the car — the coating is integral to the glass itself.
Solar control glass is a factory-fitted specification. When replacing the windscreen, a solar control variant must be sourced to match the original. This is a standard glass type with no special fitting implications or calibration requirements. Cure and drive-away times follow normal windscreen bonding procedures. Confirm with your fitter that the replacement glass includes solar control to maintain the original thermal performance.
Acoustic glass reduces cabin noise for a quieter, more comfortable ride.
Acoustic windscreen glass is laminated with a special acoustic interlayer that absorbs and dampens sound vibrations. It reduces exterior noise—from traffic, wind, and road surface—before it enters the passenger compartment. This makes the cabin noticeably quieter and creates a more peaceful driving experience. It's a comfort feature, not a safety one; standard laminated windscreens already meet impact safety requirements.
Check your windscreen for an ear symbol, the word 'Acoustic', a capital 'A', or the term 'SoundScreen' printed in one of the four corners. These markings indicate acoustic-grade glass. You can also ask your vehicle's dealership or service centre whether your model came fitted with acoustic glass—it's often a factory option on comfort or premium trims.
Acoustic glass is always laminated and bonds to the frame like any standard windscreen, so replacement follows the normal bonded-glass procedure. No specialist calibration is required. The replacement technician will fit it using standard adhesive and sealant. Cure time and drive-away restrictions are identical to standard laminated windscreens. Acoustic glass is widely available as an aftermarket OE-equivalent option.
The moulded trim that surrounds your camera and sensor cluster at the top of the windscreen, typically transferred or supplied with replacement glass.
A bracket for safety features is the moulded plastic or composite shroud that sits at the top of the windscreen, framing and protecting the camera and sensor cluster mounted behind the rear-view mirror. This trim cover houses forward-facing driver-assistance cameras and sensors — equipment that monitors the road ahead for lane-keeping, collision warning, adaptive cruise control, and similar safety functions. The bracket itself is part of the vehicle's structural frame, but the trim cover you see is what protects and aesthetically integrates the technology into the windscreen area.
Look at the top centre of your windscreen, just above or around the rear-view mirror. If you see a dark moulded shroud or trim panel — often rectangular or tapered — with a visible lens or sensor window, your vehicle has a bracket for safety features. Your service history or handbook will list any ADAS (Advanced Driver Assistance System) technologies fitted. Ask your dealer or service centre if your vehicle has forward-facing cameras or sensors; if it does, you have a bracket for safety features.
On windscreen replacement, the trim cover is typically transferred from your old glass to the new one, or supplied pre-integrated with the replacement depending on the variant. This means minimal disruption to your safety system during the swap. However, if the bracket requires recalibration after glass replacement — which depends on your specific vehicle and camera type — the job may require static calibration (using a target board) or dynamic calibration (a road drive). We confirm the exact calibration procedure when we look up your vehicle.
A camera mounted near the rear-view mirror monitors the road ahead for lane-keep and traffic-sign features.
A forward-facing camera positioned in the windscreen header area (typically mounted on or near the rear-view mirror bracket) captures video of the road ahead. This camera feeds data to driver-assistance systems such as lane-departure warning, lane-keep assist, autonomous emergency braking, and traffic-sign recognition. The camera is a core component of modern ADAS (Advanced Driver Assistance Systems) and requires precise alignment after windscreen replacement to ensure these safety features function correctly.
Look for a small dark triangular or lens-shaped component mounted in the black plastic trim area above the windscreen, typically centred near the rear-view mirror or slightly to one side. Your vehicle's handbook or infotainment menu may reference 'Lane Assist', 'Traffic Sign Recognition', or 'Autonomous Emergency Braking'. Ask your dealer or service centre directly if your car is equipped with a forward-facing camera system.
Windscreen replacement on camera-equipped vehicles requires calibration of the camera system after the new glass is fitted. The exact calibration procedure—whether static (using a target board in a controlled environment) or dynamic (road-based)—varies by vehicle make, model, and year. We confirm the precise calibration requirement when we look up your specific vehicle. Calibration ensures lane-keep, sign recognition, and emergency-braking systems function safely. This may extend the fitting schedule and may necessitate workshop-based fitting rather than mobile attendance.
A grey-tinted band across the top of your windscreen that reduces glare from sunlight and reflections above.
A grey sun strip is a tinted gradient band built into the top edge of the windscreen during manufacture. It sits within the laminated glass layers and gradually fades from opaque grey at the very top to clear further down. The strip is designed to reduce glare and reflections from sunlight, street lights, and oncoming headlights, improving comfort and visibility for the driver without obstructing the view of traffic signals or overhead hazards. Sun strips are a factory-applied feature unique to windscreens—they cannot be added to side or rear glass because those are typically toughened rather than laminated.
Look at the top of your windscreen from inside the vehicle. You will see a grey-tinted band that fades to clear glass. The tint is gradual and integral to the glass itself, not a removable film or coating. Your vehicle's service records or handbook may also list it as a standard feature. If unsure, ask your dealer or service centre whether your specific model includes a sun strip.
When replacing a windscreen with a sun strip, the replacement glass must be sourced in the exact matching variant—including the sun-strip tint and fade profile. Aftermarket and OE glass are both available for most vehicles, but the variant must be correct to match your original. There is no calibration required for the sun strip itself. If your windscreen also carries camera or sensor features, those will be calibrated separately according to your vehicle's needs.
A single camera mounted near the rear-view mirror that helps with lane-keeping and collision avoidance.
A mono camera is a single-lens camera positioned behind the windscreen, typically in the upper centre area near the rear-view mirror. It captures the road ahead and uses computer vision to detect lane markings, vehicles, and road hazards. The camera feeds data to driver-assistance systems such as lane-keeping assist, lane-departure warning, and forward-collision warning. It forms the visual foundation of these safety features, allowing the vehicle to monitor road position and surrounding traffic automatically.
Look in the black trim area above the windscreen, centred behind the rear-view mirror — you will see a small triangular lens assembly or dark lens cover. Check your vehicle handbook or ask your dealer's service department to confirm your model has lane-assistance or collision-warning features; vehicles with these systems almost always have a mono camera. Dashboard warning symbols related to lane or collision systems also indicate the presence of this camera.
When the windscreen is replaced, the camera bracket and lens assembly must be removed and carefully repositioned on the new glass. The camera may require calibration after fitting to ensure accurate road detection and lane recognition. Calibration needs vary by vehicle — we confirm the exact procedure when we look up your specific vehicle. The job may take longer than a standard windscreen replacement, and workshop facilities may be required if calibration demands a controlled environment.
Heated zones around sensors prevent frost and moisture buildup, helping your safety systems work reliably.
A sensor heated zone is an electrical heating element integrated into or around camera, radar, or sensor mounts on the windscreen. Its purpose is to prevent frost, ice, condensation, and moisture accumulation on sensor lenses and housings. This keeps safety systems — such as lane-keeping assist, collision warning, and adaptive cruise control — functioning accurately in cold, wet, or foggy conditions. Without this heating, moisture or ice can obscure sensors and cause them to malfunction or deactivate.
Check your vehicle's handbook for mention of 'heated sensor zone' or 'sensor heating' in the windscreen or ADAS section. Look at the top edge of your windscreen where cameras or radar modules are mounted — you may see small heating elements or wiring near these components. Ask your dealership or service centre directly: they can confirm whether your specific model includes sensor heating as standard.
Windscreens with heated sensor zones require careful handling during replacement to preserve the heating element and its electrical connections. The heating circuit must be reconnected properly after the new glass is fitted. Depending on the vehicle, this may involve static or dynamic camera calibration after installation. We confirm the exact procedure — including any calibration needs — when we look up your vehicle details.
Static calibration uses printed targets indoors to align your forward-facing camera after windscreen replacement.
Static camera calibration is a procedure in which a forward-facing camera system is realigned using printed target boards positioned at manufacturer-specified distances and heights in front of the vehicle. The vehicle remains stationary indoors throughout. A diagnostic tool reads the camera's view of these targets and adjusts the camera's alignment to factory specification. This ensures the camera can accurately detect road features, lane markings, pedestrians, and other objects — critical for driver-assistance systems like lane-keeping, collision warning, and adaptive cruise control to function safely and reliably.
Check your vehicle's handbook or ask your dealer's service centre whether your car has a forward-facing camera system that requires calibration after windscreen replacement. Look for driver-assistance features like lane-keeping assist, autonomous emergency braking, or adaptive cruise control on the dashboard menu. If your vehicle manual mentions 'camera calibration' or 'static target calibration', static calibration is likely part of your windscreen replacement service.
When a windscreen with an integrated or bracket-mounted camera is replaced, the camera's alignment can shift. Static calibration realigns the camera using indoor target boards, which must be performed in a workshop environment where printed targets can be positioned and secured at precise distances. This procedure is conducted after the windscreen is fitted and bonded. The workshop booking accommodates the additional time required for calibration, and we apply the no-split policy — both replacement and calibration happen at the same location on the same visit.
An aerial laminated into the windscreen or rear window restores radio, DAB or TV reception without a roof-mounted mast.
An antenna is a conductive print laminated into the glass during manufacture, typically used for radio, DAB (digital audio broadcasting) or television reception. It replaces the traditional roof-mounted aerial mast found on older vehicles. The antenna is integrated into the glass interlayer and connected to the vehicle's receiver unit via a connector embedded in the glass edge. This design offers a cleaner aesthetic, reduces wind noise, and eliminates the vulnerability of a protruding mast to damage or theft.
Check your vehicle's roof — if there is no visible aerial mast, your car likely has a laminated antenna. You can also ask your dealer or service centre whether your windscreen or rear window carries an antenna print. The connector may be visible on the glass edge or inside the door frame trim.
When replacing glass with a laminated antenna, the replacement must carry the matching antenna print and connector to restore reception immediately on fitting. Aftermarket or original-equipment glass with the correct antenna specification is essential; a plain replacement will leave you without radio or DAB signal. Our fitters verify the antenna specification during booking and source the correct variant before the appointment.
Clear windscreen glass has no tint; most cars have a slight tint as standard.
A clear windscreen contains no added tint layer. Most modern windscreens incorporate a subtle tint (typically blue, green, grey or bronze) as standard to reduce glare, provide UV protection, and improve cabin comfort. A genuinely clear windscreen is the absence of this tint. Clear glass is less common than tinted variants and is sometimes specified for aesthetic or operational reasons, though the tint difference is usually imperceptible to the naked eye.
Lower your side window halfway and hold a white piece of paper behind it. If you see a noticeable colour cast (blue, green, grey or bronze) in the side glass, your windscreen has the same tint. If the side glass appears colourless, your windscreen is likely clear. You can also ask your vehicle's dealership or service centre to confirm the windscreen specification in your service records.
Clear windscreen replacement uses the same installation process as any other windscreen. No special calibration or extended cure time applies. Sourcing is straightforward — clear glass is widely available as an aftermarket replacement. Installation time and drive-away restrictions follow standard windscreen replacement timings. If your vehicle has ADAS features (forward-facing camera or radar), calibration may be required after replacement depending on your specific vehicle; we confirm this when we look up your car details.
We confirm the exact procedure for your specific vehicle when you book.
Heat-absorbing PVB interlayer reduces solar gain and cabin temperature on warm days—but must match your original spec.
Heat-absorbing PVB is a specially formulated interlayer sandwiched between the glass plies in your windscreen. It absorbs a portion of the sun's infrared radiation before it enters the cabin, reducing solar heat gain on warm days. This keeps the interior cooler and reduces air-conditioning workload. The feature is built into the glass during manufacture and cannot be added or removed after production. If your vehicle left the factory with this interlayer, any replacement windscreen must carry the same PVB specification to maintain the original thermal performance.
Check your vehicle's specification sheet or handbook—heat-absorbing PVB is listed under windscreen or glass specification. You can also ask your dealership service centre or provide us with your vehicle registration; we'll confirm whether your car came with this feature as standard or as an option.
Replacement windscreens with heat-absorbing PVB must be sourced to the exact OE specification—aftermarket alternatives with standard PVB will not deliver the same solar-control performance. We ensure the correct spec is ordered before the fit. No calibration is required. Installation and cure procedures are identical to standard windscreen replacement; the interlayer is integral to the glass and requires no additional treatment.
Infrared camera system that helps drivers see further ahead in darkness, fitted to the windscreen or body panel.
A night vision camera uses infrared or thermal imaging to detect heat signatures and objects beyond the range of standard headlights, displaying a live feed on the dashboard display. The system allows drivers to see pedestrians, animals, and road hazards in low-light and night-time conditions with greater clarity and reaction time. It's a premium safety feature found on higher-specification vehicles, designed to supplement — not replace — standard headlights and driver attention.
Check your vehicle's infotainment display for a 'Night Vision' or 'Thermal Camera' menu option. Look for a small camera lens mounted on the front grille, bumper, or windscreen (often near the top centre). Your handbook will list it under driver-assistance features. Ask your dealer or service centre if you're unsure whether your model is fitted.
If the camera is mounted to the windscreen, a replacement requires the matching bracket and optical cut-out to be incorporated into the new glass. The system typically requires calibration after fitting to ensure accurate targeting and display alignment. Calibration procedures vary by vehicle make and model — we confirm the exact procedure when we look up your specific vehicle. This may affect scheduling and may require workshop-based fitting.
Blue-tinted windscreens reduce glare and heat while maintaining a subtle, modern appearance.
A blue tint is a light coloration applied to the windscreen glass, usually during manufacture. It reduces solar heat transmission and glare from sunlight, particularly on bright days or when driving into the sun. The tint is integral to the glass itself — not a separate film — and is chosen by the vehicle manufacturer to balance comfort, visibility, and aesthetic consistency with the vehicle's side windows and rear window. Most vehicles come with a green or blue tint as standard; the choice depends on the manufacturer's design and regional climate considerations.
Check your side windows by rolling one halfway down and holding a white piece of paper behind the glass. If you see a blue tint reflected in the glass, your windscreen will have the same tint. You can also ask your vehicle's dealership or service centre to confirm the windscreen tint specification. The tint is visible when comparing the windscreen to clear glass, though it may be subtle and harder to spot on overcast days.
Blue-tinted replacement windscreens must match the original tint to maintain visual consistency with your side and rear windows. Most replacement glass is available in the correct tint through OE (original equipment) suppliers. There is no calibration requirement related to tint. The tint does not affect fitting time, cure time, or drive-away schedules. Ensure the replacement windscreen is specified with the blue tint to avoid a mismatched appearance.
Coated windscreens have a blue or purple tint and protect your car from UV rays and heat.
A coated windscreen has a special protective layer applied to the glass that appears as a blue or purple tint and often reflects a silvery-blue colour in bright sunlight. This coating is designed to reduce the amount of ultraviolet (UV) radiation and solar heat that enters the vehicle, helping to keep the interior cooler and protecting upholstery and dashboard components from UV damage and fading. The coating is integral to the glass and doesn't require any special maintenance from you.
Look at your windscreen in bright daylight — a coated windscreen will show a distinct blue or purple tint and a silvery-blue reflection when the sun hits it directly. Check your vehicle's service booklet or window sticker (usually on the driver's door jamb), which may list the glass specification. Alternatively, ask your dealership or service centre to confirm whether your windscreen carries a UV or heat-rejection coating.
When replacing a coated windscreen, the replacement glass must match the original specification — including the coating type and tint level — to maintain the same UV and heat protection and to preserve the vehicle's interior aesthetics. Original-equipment or equivalent aftermarket coated glass is sourced to specification. The coating is applied during glass manufacture; no post-fit treatment is required. Fitting and cure times are unaffected by the presence of the coating.
The Mercedes-Benz M-Class has been in continuous production since 1998, spanning multiple generations from the original W163 through to the current W167. Early models carry straightforward laminated windscreens with minimal electronics, while mid-generation variants from the 2010s onwards introduced rain sensors, heated windscreens, and solar-control glass on higher trims.
From approximately 2022, Mercedes began integrating forward-facing windscreen-mounted cameras into the Driver Assistance Package across newer M-Class variants, enabling lane-keeping assist, collision warning, and sign recognition. These camera-equipped models require static calibration after windscreen replacement — a specialist procedure that ensures the steering angle sensor and forward camera align to Mercedes factory specifications.
Own a different Mercedes? We've got you — every variant, every year.
The questions customers ask us most often.
