Mercedes EQA windscreen replacement — booked online.

What to expect during your Mercedes EQA windscreen replacement

Booking your Mercedes-Benz EQA windscreen replacement is straightforward and happens entirely online.

1. 1

   Answer a quick quiz about your model year and features (takes under 60 seconds) to identify your exact variant.

2. 2

   Receive an instant quote and check your preferred fitting dates.

3. 3

   Complete your booking in under two minutes with a confirmed appointment.

4. 4

   Our parts team verify your glass specification matches your vehicle's factory requirements.

5. 5

   A specialist from our network is matched to your job and contacts you to arrange the fitting day.

6. 6

   On the day, the fitter replaces your windscreen, completes any required static calibration at a workshop if needed, and confirms your drive-away time before leaving.

7. 7

   You're covered by a two-year warranty on workmanship and glass quality.

Book through UK Car Glass and you're matched with an approved specialist in your area.

What features does your EQA have?

Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.

• Acoustic (Noise reduction)13

  2018–2026

  On the Mercedes EQA: fitted on every one of the 13 windscreen variants we list; model years 2018–2026.

  What it means

  Laminated glass with sound-dampening interlayers that reduce cabin noise from road and wind — standard across all EQA variants.

  On your Mercedes EQA

  All current EQA models include acoustic glass; your quote will confirm this during the parts check.

• Green13

  2018–2026

  On the Mercedes EQA: fitted on every one of the 13 windscreen variants we list; model years 2018–2026.

  What it means

  A subtle green tint applied to the glass at the factory — barely visible but filters infrared and ultraviolet light to reduce heat and glare.

  On your Mercedes EQA

  Standard on all EQA windscreens; confirmed as part of your variant identification during the quote.

• Rain Sensor13

  2018–2026No calibration after replacement

  On the Mercedes EQA: fitted on every one of the 13 windscreen variants we list; model years 2018–2026; no calibration after replacement.

  What it means

  An optical sensor that detects moisture on the windscreen and automatically activates your wipers — improves safety and convenience in wet weather.

  On your Mercedes EQA

  Fitted to all EQA models; you'll notice automatic wiper activation when rain falls.

• Vin Notch13

  2018–2026

  On the Mercedes EQA: fitted on every one of the 13 windscreen variants we list; model years 2018–2026.

  A printed VIN reference box along the bottom edge of your windscreen helps identify your vehicle's chassis number at a glance.

  What it means

  A VIN (Vehicle Identification Number) notch is a small printed or etched box positioned along the lower edge of the windscreen that displays your vehicle's chassis number. This reference marking is a manufacturing and administrative feature, allowing quick visual identification of the vehicle without needing to consult documents. It's particularly useful for service records, insurance claims, and vehicle registration purposes. The notch itself doesn't affect the structural integrity or safety performance of the glass.

  How to tell

  Look along the bottom edge of your windscreen — typically in one of the lower corners — for a small rectangular box containing printed digits or characters. If you're uncertain, check your vehicle's service handbook or ask your dealership or service centre to confirm whether your model includes this feature.

  Replacement impact

  When your windscreen is replaced, the new glass will retain the VIN notch printed or etched by the manufacturer. This is a standard feature on replacement windscreens for compatible vehicles and requires no additional work or adjustment. The notch does not affect glass fitting, cure time, or any post-replacement calibration procedures.

• Camera7

  2018–2026Calibration varies by vehicle

  On the Mercedes EQA: fitted on 7 of the 13 windscreen variants we list (54%); model years 2018–2026; calibration varies by vehicle.

  A camera mounted near the rear-view mirror monitors the road ahead for lane-keep and traffic-sign features.

  What it means

  A forward-facing camera positioned in the windscreen header area (typically mounted on or near the rear-view mirror bracket) captures video of the road ahead. This camera feeds data to driver-assistance systems such as lane-departure warning, lane-keep assist, autonomous emergency braking, and traffic-sign recognition. The camera is a core component of modern ADAS (Advanced Driver Assistance Systems) and requires precise alignment after windscreen replacement to ensure these safety features function correctly.

  How to tell

  Look for a small dark triangular or lens-shaped component mounted in the black plastic trim area above the windscreen, typically centred near the rear-view mirror or slightly to one side. Your vehicle's handbook or infotainment menu may reference 'Lane Assist', 'Traffic Sign Recognition', or 'Autonomous Emergency Braking'. Ask your dealer or service centre directly if your car is equipped with a forward-facing camera system.

  Replacement impact

  Windscreen replacement on camera-equipped vehicles requires calibration of the camera system after the new glass is fitted. The exact calibration procedure—whether static (using a target board in a controlled environment) or dynamic (road-based)—varies by vehicle make, model, and year. We confirm the precise calibration requirement when we look up your specific vehicle. Calibration ensures lane-keep, sign recognition, and emergency-braking systems function safely. This may extend the fitting schedule and may necessitate workshop-based fitting rather than mobile attendance.

  Calibration mix across our Mercedes variants

  • 1Static

  We confirm the exact procedure for your specific vehicle when you book.

• HUD - Head Up Display5

  2021–2026No calibration after replacement

  On the Mercedes EQA: fitted on 5 of the 13 windscreen variants we list (38%); model years 2021–2026; no calibration after replacement.

  A Head-Up Display projects your speed, navigation cues and key alerts onto the windscreen so you can read them without looking down.

  What it means

  A Head-Up Display (HUD) projects driving information — speed, navigation cues, ADAS alerts — onto the windscreen in your line of sight, so you can read it without taking your eyes off the road. The projector is mounted in the dashboard and shines the image upwards onto a special HUD-compatible windscreen that uses a wedge-shaped laminate to prevent a ghost image. Common on premium and sports models, increasingly standard on mid-range cars from the 2020s onwards.

  How to tell

  Check your vehicle's specification sheet or handbook under 'display features' or 'HUD'. Look for a small projector unit mounted on the dashboard, typically below the steering wheel or in the instrument cluster area. When you start the vehicle, a bright image should appear on the lower windscreen area. Your dealer's service centre can confirm whether your specific model and trim level includes a HUD.

  Replacement impact

  Your replacement windscreen needs to be HUD-compatible — built with the correct wedge laminate so the projected image stays sharp and double-free. Once the HUD-compatible glass is fitted, the projector itself typically doesn't need recalibration: image position is user-adjustable via your dashboard controls. We confirm your vehicle uses the HUD-compatible windscreen variant when ordering, so the replacement matches the original.

• TV Antenna5

  2021–2026

  On the Mercedes EQA: fitted on 5 of the 13 windscreen variants we list (38%); model years 2021–2026.

  A TV-reception aerial printed into the rear window, typically for in-car entertainment systems.

  What it means

  A TV antenna is an aerial pattern laminated into the rear windscreen or rear side window to receive broadcast television signals. It's a separate system from the vehicle's radio or mobile antenna and is typically found in vehicles equipped with rear-seat entertainment systems. The antenna is printed directly onto or into the glass during manufacture, so when the glass is replaced, the antenna pattern must be reproduced on the replacement to maintain reception quality.

  How to tell

  Check your vehicle's specification sheet or handbook for rear-seat entertainment or TV tuner capability. If your car has a rear-seat entertainment system with a TV tuner, the rear window will have a TV antenna. You can also ask your dealer or service centre to confirm whether your vehicle has this feature.

  Replacement impact

  When the rear window is replaced, the replacement glass must include the matching TV antenna print to preserve reception. OEM (original equipment manufacturer) glass is typically required to ensure the antenna pattern is identical. The antenna is passive and requires no calibration or specialist procedures after fitting. Cure time for bonded rear glass is required; the fitter will confirm the drive-away time on the day.

• Mono Camera4

  2018–2026Calibration varies by vehicle

  On the Mercedes EQA: fitted on 4 of the 13 windscreen variants we list (31%); model years 2018–2026; calibration varies by vehicle.

  What it means

  A single forward-facing camera mounted behind the windscreen that supports lane-keeping assist, forward-collision warning, and traffic-sign recognition.

  On your Mercedes EQA

  Present on three out of four EQA variants; newer and mid-spec models most commonly carry this. Confirmed during your quote.

  Calibration mix across our Mercedes variants

  • 1Static

  We confirm the exact procedure for your specific vehicle when you book.

• Stereo Camera3

  2021–2022Calibration varies by vehicle

  On the Mercedes EQA: fitted on 3 of the 13 windscreen variants we list (23%); model years 2021–2022; calibration varies by vehicle.

  What it means

  Two forward-facing cameras that work together to provide depth perception and enhanced object recognition for advanced autonomous driving functions.

  On your Mercedes EQA

  Fitted to select premium variants; your quote will identify whether your model carries this system.

  Calibration mix across our Mercedes variants

  • 1Static

  We confirm the exact procedure for your specific vehicle when you book.

• Bracket For Safety Features1

  2018–2026Calibration varies by vehicle

  On the Mercedes EQA: fitted on 1 of the 13 windscreen variants we list (8%); model years 2018–2026; calibration varies by vehicle.

  The moulded trim that surrounds your camera and sensor cluster at the top of the windscreen, typically transferred or supplied with replacement glass.

  What it means

  A bracket for safety features is the moulded plastic or composite shroud that sits at the top of the windscreen, framing and protecting the camera and sensor cluster mounted behind the rear-view mirror. This trim cover houses forward-facing driver-assistance cameras and sensors — equipment that monitors the road ahead for lane-keeping, collision warning, adaptive cruise control, and similar safety functions. The bracket itself is part of the vehicle's structural frame, but the trim cover you see is what protects and aesthetically integrates the technology into the windscreen area.

  How to tell

  Look at the top centre of your windscreen, just above or around the rear-view mirror. If you see a dark moulded shroud or trim panel — often rectangular or tapered — with a visible lens or sensor window, your vehicle has a bracket for safety features. Your service history or handbook will list any ADAS (Advanced Driver Assistance System) technologies fitted. Ask your dealer or service centre if your vehicle has forward-facing cameras or sensors; if it does, you have a bracket for safety features.

  Replacement impact

  On windscreen replacement, the trim cover is typically transferred from your old glass to the new one, or supplied pre-integrated with the replacement depending on the variant. This means minimal disruption to your safety system during the swap. However, if the bracket requires recalibration after glass replacement — which depends on your specific vehicle and camera type — the job may require static calibration (using a target board) or dynamic calibration (a road drive). We confirm the exact calibration procedure when we look up your vehicle.

  Calibration mix across our Mercedes variants

  • 1Static

  We confirm the exact procedure for your specific vehicle when you book.

• Sensor Heated Zone1

  2018–2026Calibration varies by vehicle

  On the Mercedes EQA: fitted on 1 of the 13 windscreen variants we list (8%); model years 2018–2026; calibration varies by vehicle.

  Heated zones around sensors prevent frost and moisture buildup, helping your safety systems work reliably.

  What it means

  A sensor heated zone is an electrical heating element integrated into or around camera, radar, or sensor mounts on the windscreen. Its purpose is to prevent frost, ice, condensation, and moisture accumulation on sensor lenses and housings. This keeps safety systems — such as lane-keeping assist, collision warning, and adaptive cruise control — functioning accurately in cold, wet, or foggy conditions. Without this heating, moisture or ice can obscure sensors and cause them to malfunction or deactivate.

  How to tell

  Check your vehicle's handbook for mention of 'heated sensor zone' or 'sensor heating' in the windscreen or ADAS section. Look at the top edge of your windscreen where cameras or radar modules are mounted — you may see small heating elements or wiring near these components. Ask your dealership or service centre directly: they can confirm whether your specific model includes sensor heating as standard.

  Replacement impact

  Windscreens with heated sensor zones require careful handling during replacement to preserve the heating element and its electrical connections. The heating circuit must be reconnected properly after the new glass is fitted. Depending on the vehicle, this may involve static or dynamic camera calibration after installation. We confirm the exact procedure — including any calibration needs — when we look up your vehicle details.

  Calibration mix across our Mercedes variants

  • 1Static

  We confirm the exact procedure for your specific vehicle when you book.

• Static Camera Calibration Process1

  2018–2026Static calibration required

  On the Mercedes EQA: fitted on 1 of the 13 windscreen variants we list (8%); model years 2018–2026; static calibration required.

  What it means

  On select higher-spec variants, the forward camera must be recalibrated after windscreen replacement using printed target boards and specialist diagnostic equipment in a controlled workshop environment.

  On your Mercedes EQA

  Only required on certain models with advanced driver-assistance packages. If your variant needs it, your fitter will schedule the entire job (replacement and calibration) at a workshop — no split location.

• Mercedes E Class From £251
• Mercedes A Class From £256
• Mercedes Sprinter From £257
• Mercedes 300 From £273
• Mercedes C Class From £292
• Mercedes M Class From £295
• Mercedes Citan From £306
• Mercedes EQV From £315
• Mercedes eVito From £315
• Mercedes V Class From £315
• Mercedes Vito From £315
• Mercedes Vaneo From £340