Instant quote across six Wrangler variants in under 60 seconds, fitted by approved fitters — booked in under two minutes.
Make
Jeep
Model
Wrangler
No card required · Free to quote
Price variation reflects generation differences and ADAS equipment uptake. Earlier Wranglers without camera systems are typically more affordable; newer JL-generation models equipped with Active Driving Assist carry higher costs due to calibration complexity. Acoustic laminated windscreens, fitted to some newer variants, also influence pricing compared to standard laminated glass.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2026 | £381 — £689 | 2 variants | Price my 2026 |
| 2025 | £381 — £689 | 2 variants | Price my 2025 |
| 2024 | £381 — £689 | 2 variants | Price my 2024 |
| 2023 | £381 — £689 | 2 variants | Price my 2023 |
| 2022 | £381 — £689 | 2 variants | Price my 2022 |
| 2021 | £381 — £689 | 2 variants | Price my 2021 |
| 2020 | £381 — £689 | 2 variants | Price my 2020 |
| 2019 | £381 — £749 | 3 variants | Price my 2019 |
| 2018 | £689 — £749 | 2 variants | Price my 2018 |
| 2017 | £749 — £749 | 1 variant | Price my 2017 |
| 2016 | £749 — £749 | 1 variant | Price my 2016 |
| 2015 | £749 — £749 | 1 variant | Price my 2015 |
| 2014 | £749 — £749 | 1 variant | Price my 2014 |
| 2013 | £749 — £749 | 1 variant | Price my 2013 |
| 2012 | £749 — £749 | 1 variant | Price my 2012 |
| 2011 | £749 — £749 | 1 variant | Price my 2011 |
| 2010 | £304 — £749 | 2 variants | Price my 2010 |
| 2009 | £304 — £749 | 2 variants | Price my 2009 |
| 2008 | £304 — £749 | 2 variants | Price my 2008 |
| 2007 | £304 — £749 | 2 variants | Price my 2007 |
| 1995 | £400 — £400 | 1 variant | Price my 1995 |
| 1994 | £400 — £400 | 1 variant | Price my 1994 |
| 1993 | £400 — £400 | 1 variant | Price my 1993 |
| 1992 | £400 — £400 | 1 variant | Price my 1992 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older Wranglers can still be booked.
Curious why prices vary so widely? Read our UK windscreen replacement cost guide .
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.81/5 from 1,468 Trustpilot reviews.
Replacing your Wrangler windscreen is a straightforward process from online quote through to fitting.
Start with an instant quote using our guided quiz — no registration needed, just model year and trim details. In under 60 seconds you'll see pricing and availability.
Once booked, our parts-check team confirms your exact glass specification, including any camera bracket or acoustic features.
You'll be matched with a specialist in your area who can fit your Wrangler and, if needed, complete any ADAS calibration at a workshop.
On fitting day, the technician removes the old windscreen, prepares the frame, and installs your replacement glass. Windscreen jobs typically take 45–90 minutes of the technician's time, or longer if calibration is required.
Your fitter will confirm the minimum drive-away time before leaving — this depends on the adhesive used and ambient conditions, not on whether calibration is involved.
You're covered by a two-year warranty on workmanship and glass quality from the date of replacement.
Most Wrangler jobs fit within a couple of hours from start to finish, and you'll be back on the road the same day.
Most Wrangler windscreen replacements can be fitted at your address as a mobile service. However, if your Wrangler is equipped with Active Driving Assist, the forward-facing camera requires static calibration in a controlled workshop environment after the glass is fitted.
When calibration is needed, the entire job — replacement and calibration — is scheduled at a workshop as a single visit, so calibration is guaranteed to be completed on the day. Calibration does not extend the overall drive-away time; your technician will confirm the specific timing before you leave.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
Acoustic glass reduces cabin noise for a quieter, more comfortable ride.
Acoustic windscreen glass is laminated with a special acoustic interlayer that absorbs and dampens sound vibrations. It reduces exterior noise—from traffic, wind, and road surface—before it enters the passenger compartment. This makes the cabin noticeably quieter and creates a more peaceful driving experience. It's a comfort feature, not a safety one; standard laminated windscreens already meet impact safety requirements.
Check your windscreen for an ear symbol, the word 'Acoustic', a capital 'A', or the term 'SoundScreen' printed in one of the four corners. These markings indicate acoustic-grade glass. You can also ask your vehicle's dealership or service centre whether your model came fitted with acoustic glass—it's often a factory option on comfort or premium trims.
Acoustic glass is always laminated and bonds to the frame like any standard windscreen, so replacement follows the normal bonded-glass procedure. No specialist calibration is required. The replacement technician will fit it using standard adhesive and sealant. Cure time and drive-away restrictions are identical to standard laminated windscreens. Acoustic glass is widely available as an aftermarket OE-equivalent option.
An aerial laminated into the windscreen or rear window restores radio, DAB or TV reception without a roof-mounted mast.
An antenna is a conductive print laminated into the glass during manufacture, typically used for radio, DAB (digital audio broadcasting) or television reception. It replaces the traditional roof-mounted aerial mast found on older vehicles. The antenna is integrated into the glass interlayer and connected to the vehicle's receiver unit via a connector embedded in the glass edge. This design offers a cleaner aesthetic, reduces wind noise, and eliminates the vulnerability of a protruding mast to damage or theft.
Check your vehicle's roof — if there is no visible aerial mast, your car likely has a laminated antenna. You can also ask your dealer or service centre whether your windscreen or rear window carries an antenna print. The connector may be visible on the glass edge or inside the door frame trim.
When replacing glass with a laminated antenna, the replacement must carry the matching antenna print and connector to restore reception immediately on fitting. Aftermarket or original-equipment glass with the correct antenna specification is essential; a plain replacement will leave you without radio or DAB signal. Our fitters verify the antenna specification during booking and source the correct variant before the appointment.
Solar control glass absorbs infrared rays to reduce heat and improve cabin comfort.
Solar control is a coating applied to the windscreen that absorbs the sun's infrared radiation rather than allowing it to pass through into the cabin. This reduces solar heat gain, helping to keep the interior cooler and more comfortable, particularly in warm weather or direct sunlight. The coating is transparent to visible light, so it doesn't darken the windscreen or affect visibility. It's a passive thermal management feature that works continuously whenever the sun is shining on the glass.
Check your vehicle's specification sheet or contact your dealership service centre to confirm whether solar control glass is fitted. Some manufacturers list it as 'solar control windscreen', 'heat-reflective glass', or 'thermal management glass'. It's a factory-fitted feature and won't be visibly obvious from outside the car — the coating is integral to the glass itself.
Solar control glass is a factory-fitted specification. When replacing the windscreen, a solar control variant must be sourced to match the original. This is a standard glass type with no special fitting implications or calibration requirements. Cure and drive-away times follow normal windscreen bonding procedures. Confirm with your fitter that the replacement glass includes solar control to maintain the original thermal performance.
A printed VIN reference box along the bottom edge of your windscreen helps identify your vehicle's chassis number at a glance.
A VIN (Vehicle Identification Number) notch is a small printed or etched box positioned along the lower edge of the windscreen that displays your vehicle's chassis number. This reference marking is a manufacturing and administrative feature, allowing quick visual identification of the vehicle without needing to consult documents. It's particularly useful for service records, insurance claims, and vehicle registration purposes. The notch itself doesn't affect the structural integrity or safety performance of the glass.
Look along the bottom edge of your windscreen — typically in one of the lower corners — for a small rectangular box containing printed digits or characters. If you're uncertain, check your vehicle's service handbook or ask your dealership or service centre to confirm whether your model includes this feature.
When your windscreen is replaced, the new glass will retain the VIN notch printed or etched by the manufacturer. This is a standard feature on replacement windscreens for compatible vehicles and requires no additional work or adjustment. The notch does not affect glass fitting, cure time, or any post-replacement calibration procedures.
A camera mounted near the rear-view mirror monitors the road ahead for lane-keep and traffic-sign features.
A forward-facing camera positioned in the windscreen header area (typically mounted on or near the rear-view mirror bracket) captures video of the road ahead. This camera feeds data to driver-assistance systems such as lane-departure warning, lane-keep assist, autonomous emergency braking, and traffic-sign recognition. The camera is a core component of modern ADAS (Advanced Driver Assistance Systems) and requires precise alignment after windscreen replacement to ensure these safety features function correctly.
Look for a small dark triangular or lens-shaped component mounted in the black plastic trim area above the windscreen, typically centred near the rear-view mirror or slightly to one side. Your vehicle's handbook or infotainment menu may reference 'Lane Assist', 'Traffic Sign Recognition', or 'Autonomous Emergency Braking'. Ask your dealer or service centre directly if your car is equipped with a forward-facing camera system.
Windscreen replacement on camera-equipped vehicles requires calibration of the camera system after the new glass is fitted. The exact calibration procedure—whether static (using a target board in a controlled environment) or dynamic (road-based)—varies by vehicle make, model, and year. We confirm the precise calibration requirement when we look up your specific vehicle. Calibration ensures lane-keep, sign recognition, and emergency-braking systems function safely. This may extend the fitting schedule and may necessitate workshop-based fitting rather than mobile attendance.
The Jeep Wrangler has been in continuous production since 1992, evolving through distinct generations from the original YJ through to the current JL platform. Early Wranglers carried straightforward laminated windscreens; newer models from the mid-2010s onwards introduced green-tinted glass and, in some trims, acoustic laminated windscreens that reduce cabin noise and vibration.
From the JL generation onwards (2018+), some Wrangler variants are equipped with Active Driving Assist, a forward-facing camera system mounted behind the windscreen that handles lane detection and vehicle awareness. Windscreen replacement on these models requires camera calibration after fitting to restore ADAS functionality.
Own a different Jeep? We've got you — every variant, every year.
The questions customers ask us most often.
