Annette
ownerVerified on Trustpilot20 Oct 2026
2008 Dodge Nitro
On a very wet afternoon your technician…
On a very wet afternoon your technician persevered to get the job done.
Dodge windscreen replacement across 7 models, instant quotes in under 60 seconds — booked and fitted by trusted local fitters.
Make
Dodge
No card required · Free to quote
Dodge's windscreen replacement needs span a broad range, from the iconic Intrepid saloon through the practical Journey crossover to the Ram 1500 pick-up. Many of these models were built across distinct generations, meaning glass specifications vary considerably across model year ranges.
From approximately 2020 onwards, Dodge began fitting standard ADAS (Active Driving Assist System) to most new vehicles, introducing front-facing windscreen cameras that require static calibration after glass replacement. Acoustic interlayer windscreens (sound-dampening) are catalogued as an option on certain trim levels across recent model ranges.
Because Dodge vehicles often share platforms with Chrysler — particularly the LH-platform models like the Intrepid — glass part numbers can sometimes be shared across both brands, helping with availability on older variants.
Prices across the Dodge range reflect significant differences between generations and trim levels. Older Intrepid and Caliber models without ADAS sit at the more accessible end, whilst newer Journey and Ram 1500 variants — especially those equipped with the standard Active Driving Assist System — carry higher costs due to calibration requirements after fitting.
Acoustic windscreens, where available on higher trims, also affect pricing. Your online quote takes all these factors into account once you've identified your exact model and year.
Most Dodge windscreen replacements can be completed at your home or workplace via mobile fitting. However, if your vehicle is equipped with the standard ADAS system — typical of models from approximately 2020 onwards — static camera calibration will be required after the glass is replaced. Depending on the technician's equipment, calibration may need to take place at a workshop rather than mobile.
UKCG follows a no-split policy: if a workshop visit is needed for calibration, the entire job (glass replacement plus calibration) is scheduled at one location to ensure safety-critical adjustments are completed properly.
Pick your model to see every year and variant in our catalogue, with instant online prices matched to your exact specification.
Read how our windscreen replacement service works, or see Dodge rear window replacement.
Showing 1 review from verified Dodge owners. Across the whole of UK Car Glass, 4.82/5 from 1,502 Trustpilot reviews.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Across the Dodge range: fitted on every one of the 6 Dodge models we list; model years 1962–2026.
Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
Across the Dodge range: fitted on 4 of the 6 Dodge models we list (67%); model years 1962–2026.
A blue-tinted gradient band across the top of your windscreen that reduces glare without affecting your view of the road.
A blue sun strip is a tinted gradient band built into the upper edge of your windscreen's laminate layer. It reduces glare from sunlight reflecting off the road and bonnet without darkening your main field of vision. The tint is created during manufacture as part of the glass laminate itself — it cannot be added or removed later. Sun strips are a windscreen-only feature; rear and side windows cannot carry this effect because they use tempered rather than laminated glass.
Look at the top of your windscreen from inside the car — you'll see a distinct blue-tinted band running horizontally across the upper portion. Check your vehicle's specification sheet or ask your dealership service centre whether your windscreen is listed as a 'blue sun strip' or 'tinted sun strip' variant. Your invoice or parts manual will confirm it.
When replacing a windscreen with a blue sun strip, the replacement must be the sun-strip variant — a standard plain windscreen will not replicate the tinted band. Your replacement glass is sourced as an exact match to your original specification. There are no additional calibration or cure implications beyond a standard windscreen replacement. Fitting and drive-away times remain unchanged.
Across the Dodge range: fitted on 2 of the 6 Dodge models we list (33%); model years 1993–2011.
Solar control glass absorbs infrared rays to reduce heat and improve cabin comfort.
Solar control is a coating applied to the windscreen that absorbs the sun's infrared radiation rather than allowing it to pass through into the cabin. This reduces solar heat gain, helping to keep the interior cooler and more comfortable, particularly in warm weather or direct sunlight. The coating is transparent to visible light, so it doesn't darken the windscreen or affect visibility. It's a passive thermal management feature that works continuously whenever the sun is shining on the glass.
Check your vehicle's specification sheet or contact your dealership service centre to confirm whether solar control glass is fitted. Some manufacturers list it as 'solar control windscreen', 'heat-reflective glass', or 'thermal management glass'. It's a factory-fitted feature and won't be visibly obvious from outside the car — the coating is integral to the glass itself.
Solar control glass is a factory-fitted specification. When replacing the windscreen, a solar control variant must be sourced to match the original. This is a standard glass type with no special fitting implications or calibration requirements. Cure and drive-away times follow normal windscreen bonding procedures. Confirm with your fitter that the replacement glass includes solar control to maintain the original thermal performance.
Across the Dodge range: fitted on 1 of the 6 Dodge models we list (17%); model years 2007–2011.
A printed VIN reference box along the bottom edge of your windscreen helps identify your vehicle's chassis number at a glance.
A VIN (Vehicle Identification Number) notch is a small printed or etched box positioned along the lower edge of the windscreen that displays your vehicle's chassis number. This reference marking is a manufacturing and administrative feature, allowing quick visual identification of the vehicle without needing to consult documents. It's particularly useful for service records, insurance claims, and vehicle registration purposes. The notch itself doesn't affect the structural integrity or safety performance of the glass.
Look along the bottom edge of your windscreen — typically in one of the lower corners — for a small rectangular box containing printed digits or characters. If you're uncertain, check your vehicle's service handbook or ask your dealership or service centre to confirm whether your model includes this feature.
When your windscreen is replaced, the new glass will retain the VIN notch printed or etched by the manufacturer. This is a standard feature on replacement windscreens for compatible vehicles and requires no additional work or adjustment. The notch does not affect glass fitting, cure time, or any post-replacement calibration procedures.
The questions customers ask us most often.
Not all — mainly vehicles from approximately 2020 onwards with the standard Active Driving Assist System. Older models like the Intrepid, Caliber, and early Journey variants typically do not. Your online quote will identify whether your specific variant requires calibration.
If calibration is needed, many comprehensive insurance policies cover the cost. Your technician will confirm the requirement at the parts-check stage of your booking.
The Dodge Intrepid was built on Chrysler's LH platform, shared with models like the Chrysler Concorde and LHS. This platform-sharing means windscreen specifications — and sometimes part numbers — can overlap between Dodge and Chrysler. It helps with glass availability, especially on older examples.
No — acoustic interlayer windscreens (with sound-dampening polyvinyl butyral layers) are typically optional or fitted to higher trim levels only. Your quote will confirm whether your specific model and trim includes this feature. If you're unsure, the online variant identification will clarify what your car is equipped with.
Technician time typically runs 45–90 minutes for a non-ADAS windscreen, depending on the vehicle's design and any obstacles around the frame. If your Dodge requires ADAS calibration, the job takes longer because static camera calibration is completed after the glass is set.
Calibration runs in parallel with adhesive cure, so it doesn't extend the time before you can drive away — your technician will confirm the exact drive-away window before finishing.
You don't need to know. Our online widget asks a few quick questions — make, model, year, and a couple of feature details — to narrow the variant down. Once booked, our parts check team verifies the exact specification against your VIN before the job is dispatched.
Almost always, yes, where a forward-facing camera is fitted. The technicians in our network include ADAS-calibration-certified specialists — we confirm whether your job needs a workshop or can complete on your driveway when we book.
Your replacement glass matches your original factory specification — same size, features and trim fitment as the glass the car left the factory with. It's UK-approved for the road and typically supplied by tier-1 manufacturers like Pilkington, Saint-Gobain, and AGC.
OEM-branded glass (with the vehicle-maker logo) is available on request at a higher price.
Most windscreen replacements happen at your chosen location — home, office, or car park. Some jobs are better suited to a workshop — for example, windscreens with ADAS cameras needing static calibration, or where access to power, shelter, or controlled conditions makes the work safer indoors. We let you know when we confirm your booking.
Most windscreen replacements take 45–90 minutes of the technician's time. ADAS calibration extends the technician's time on the job, but cure time runs in parallel — so it doesn't usually delay when you can drive. Your technician will confirm exact timings on the day.
Most UK comprehensive policies include glass cover, typically with an excess of £75–£100. If your insurer is on our approved list, the specialist you're matched with bills them directly and you just pay the excess.
Otherwise you can pay UK Car Glass directly and claim back from your insurer — our all-inclusive price is often lower than the excess anyway, so paying direct can work out cheaper.
Two years on workmanship defects — water leaks, wind noise, bonding failures — from the date of replacement. If the specialist's work isn't right, we arrange to put it right under the warranty process.