Instant quote for your Chevrolet Trax windscreen in under 60 seconds, fitted by approved fitters near you — booked online in under two minutes.
Make
Chevrolet
Model
Trax
No card required · Free to quote
Price variation depends on your model year and ADAS equipment. Earlier Trax variants without camera systems are typically more straightforward to replace. Newer models equipped with Chevy Safety Assist require static camera recalibration after fitting, which involves additional technician time and workshop-based setup.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2026 | £359 — £359 | 1 variant | Price my 2026 |
| 2025 | £359 — £359 | 1 variant | Price my 2025 |
| 2024 | £359 — £359 | 1 variant | Price my 2024 |
| 2023 | £359 — £359 | 1 variant | Price my 2023 |
| 2022 | £359 — £359 | 1 variant | Price my 2022 |
| 2021 | £359 — £359 | 1 variant | Price my 2021 |
| 2020 | £359 — £359 | 1 variant | Price my 2020 |
| 2019 | £359 — £359 | 1 variant | Price my 2019 |
| 2018 | £359 — £359 | 1 variant | Price my 2018 |
| 2017 | £359 — £359 | 1 variant | Price my 2017 |
| 2016 | £359 — £359 | 1 variant | Price my 2016 |
| 2015 | £359 — £359 | 1 variant | Price my 2015 |
| 2014 | £359 — £359 | 1 variant | Price my 2014 |
| 2013 | £359 — £359 | 1 variant | Price my 2013 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older Traxs can still be booked.
Curious why prices vary so widely? Read our UK windscreen replacement cost guide .
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.82/5 from 1,422 Trustpilot reviews.
Booking your Trax windscreen replacement through UKCG is a straightforward four-step process.
Answer a quick online quiz about your Trax variant — takes under 60 seconds and identifies your exact glass specification, including any camera brackets or ADAS features.
Receive an instant quote and proceed to checkout — your full booking is confirmed in under two minutes with a date and technician match.
Our parts-check team verifies your glass specification and confirms whether your variant requires ADAS recalibration; if so, your appointment is scheduled at a workshop to include calibration in one visit.
On fitting day, the technician replaces your windscreen and, if needed, completes static camera calibration using precision target boards before you drive away.
Your replacement comes with a two-year warranty covering workmanship and glass quality — any concerns are handled directly by UKCG from start to finish.
Throughout the process, you're guided by UKCG's team and matched with a local technician vetted for quality and safety.
Most Trax windscreen replacements can be arranged as a mobile visit to your home or workplace. However, if your variant is equipped with the Chevy Safety Assist camera system, the job requires static ADAS recalibration with precision target boards — this must be done at a workshop.
UKCG schedules both replacement and recalibration in a single workshop visit so you don't have to make two trips. Your technician will confirm whether your specific Trax needs this calibration step during the parts check that follows your online quote.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Factory-bonded rubber or polymer trim means your replacement glass arrives ready to fit as one complete unit.
Encapsulation is a rubber or polymer gasket moulded directly onto the glass edges during manufacturing. The trim is bonded to the glass at the factory — either by injection moulding, PU robot extrusion, or adhesive bonding. When you need a replacement, the entire panel arrives with its trim already attached, so the glass and gasket are replaced together as a single unit rather than as separate components.
Check your current windscreen or rear window edges. If you see a continuous rubber or polymer seal running around the perimeter that appears moulded or permanently bonded to the glass itself — rather than a separate trim clipped or screwed to the frame — your glass is encapsulated. Ask your dealer or service centre to confirm; they can also check your vehicle specification sheet.
Encapsulated glass simplifies replacement because there's no separate trim to remove, refit, or source. The bonded gasket is replaced as part of the glass unit, which reduces installation complexity and potential leak points. Cure time and drive-away procedures remain unchanged. No additional sourcing delays — encapsulated replacements are stocked as complete assemblies by most suppliers.
Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
Solar control glass absorbs infrared rays to reduce heat and improve cabin comfort.
Solar control is a coating applied to the windscreen that absorbs the sun's infrared radiation rather than allowing it to pass through into the cabin. This reduces solar heat gain, helping to keep the interior cooler and more comfortable, particularly in warm weather or direct sunlight. The coating is transparent to visible light, so it doesn't darken the windscreen or affect visibility. It's a passive thermal management feature that works continuously whenever the sun is shining on the glass.
Check your vehicle's specification sheet or contact your dealership service centre to confirm whether solar control glass is fitted. Some manufacturers list it as 'solar control windscreen', 'heat-reflective glass', or 'thermal management glass'. It's a factory-fitted feature and won't be visibly obvious from outside the car — the coating is integral to the glass itself.
Solar control glass is a factory-fitted specification. When replacing the windscreen, a solar control variant must be sourced to match the original. This is a standard glass type with no special fitting implications or calibration requirements. Cure and drive-away times follow normal windscreen bonding procedures. Confirm with your fitter that the replacement glass includes solar control to maintain the original thermal performance.
A printed VIN reference box along the bottom edge of your windscreen helps identify your vehicle's chassis number at a glance.
A VIN (Vehicle Identification Number) notch is a small printed or etched box positioned along the lower edge of the windscreen that displays your vehicle's chassis number. This reference marking is a manufacturing and administrative feature, allowing quick visual identification of the vehicle without needing to consult documents. It's particularly useful for service records, insurance claims, and vehicle registration purposes. The notch itself doesn't affect the structural integrity or safety performance of the glass.
Look along the bottom edge of your windscreen — typically in one of the lower corners — for a small rectangular box containing printed digits or characters. If you're uncertain, check your vehicle's service handbook or ask your dealership or service centre to confirm whether your model includes this feature.
When your windscreen is replaced, the new glass will retain the VIN notch printed or etched by the manufacturer. This is a standard feature on replacement windscreens for compatible vehicles and requires no additional work or adjustment. The notch does not affect glass fitting, cure time, or any post-replacement calibration procedures.
The Chevrolet Trax has been in continuous production since 2013, evolving through successive generations as Chevrolet's compact crossover offering. Earlier models carry straightforward laminated windscreens with basic encapsulation, while current variants feature green-tinted glass with solar-control coating to manage cabin heat.
From 2020 onwards, most Chevrolet models including the Trax have incorporated the Chevy Safety Assist suite, which includes forward-facing camera systems for features such as Forward Collision Alert and Automatic Emergency Braking. This means newer variants require ADAS recalibration after windscreen replacement to ensure these safety systems continue to function correctly.
Own a different Chevrolet? We've got you — every variant, every year.
The questions customers ask us most often.
