Aston Martin V8 Vantage windscreen replacement booked online in under two minutes, fitted by approved specialists across the UK.
Make
Aston Martin
Model
V8 Vantage
No card required · Free to quote
Replacement costs vary across the three active variants in our catalogue, driven mainly by generation differences and the presence of premium features like acoustic glass and heated windscreen technology. Variants with ADAS camera systems may require calibration after fitting, which can influence scheduling but doesn't alter the overall cost structure.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2017 | £1,189 — £1,430 | 3 variants | Price my 2017 |
| 2016 | £1,189 — £1,430 | 3 variants | Price my 2016 |
| 2015 | £1,189 — £1,430 | 3 variants | Price my 2015 |
| 2014 | £1,189 — £1,430 | 3 variants | Price my 2014 |
| 2013 | £1,189 — £1,430 | 3 variants | Price my 2013 |
| 2012 | £1,189 — £1,424 | 2 variants | Price my 2012 |
| 2011 | £1,424 — £1,424 | 1 variant | Price my 2011 |
| 2010 | £1,424 — £1,424 | 1 variant | Price my 2010 |
| 2009 | £1,424 — £1,424 | 1 variant | Price my 2009 |
| 2008 | £1,424 — £1,424 | 1 variant | Price my 2008 |
| 2007 | £1,424 — £1,424 | 1 variant | Price my 2007 |
| 2006 | £1,424 — £1,424 | 1 variant | Price my 2006 |
| 2005 | £1,424 — £1,424 | 1 variant | Price my 2005 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older V8 Vantages can still be booked.
Curious why prices vary so widely? Read our UK windscreen replacement cost guide .
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.82/5 from 1,422 Trustpilot reviews.
Booking your V8 Vantage windscreen replacement is straightforward and guided from start to finish.
Complete a quick online quote using our interactive widget — under 60 seconds. The quiz identifies your exact variant by generation and features.
Check the availability and pricing for your car — no hidden costs, all-inclusive quotes shown upfront.
Book your fitting slot at a time that suits you: mobile (at your address) is the default, though workshop fitting is available if preferred.
Our parts team verify your glass specification — confirming green tint, antenna, sun strip, and any acoustic or heated features.
A matched specialist near you carries out the replacement, typically in 45–90 minutes for your windscreen.
Your fitter confirms the minimum drive-away time before you leave, and you're covered by a two-year warranty on the replacement.
From quote to booked appointment, the whole process takes under two minutes — and your new windscreen is fitted by a trusted local technician.
Most V8 Vantage windscreen replacements can be arranged as a mobile fitting at your address — the default option across our network. However, some variants in our catalogue may carry ADAS camera systems that require static calibration after the glass is fitted.
If calibration is necessary, the entire job — replacement and calibration — is scheduled at a workshop to ensure accuracy and keep you in control of the process. This will be confirmed at the quote stage, so there are no surprises.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
A printed VIN reference box along the bottom edge of your windscreen helps identify your vehicle's chassis number at a glance.
A VIN (Vehicle Identification Number) notch is a small printed or etched box positioned along the lower edge of the windscreen that displays your vehicle's chassis number. This reference marking is a manufacturing and administrative feature, allowing quick visual identification of the vehicle without needing to consult documents. It's particularly useful for service records, insurance claims, and vehicle registration purposes. The notch itself doesn't affect the structural integrity or safety performance of the glass.
Look along the bottom edge of your windscreen — typically in one of the lower corners — for a small rectangular box containing printed digits or characters. If you're uncertain, check your vehicle's service handbook or ask your dealership or service centre to confirm whether your model includes this feature.
When your windscreen is replaced, the new glass will retain the VIN notch printed or etched by the manufacturer. This is a standard feature on replacement windscreens for compatible vehicles and requires no additional work or adjustment. The notch does not affect glass fitting, cure time, or any post-replacement calibration procedures.
An aerial laminated into the windscreen or rear window restores radio, DAB or TV reception without a roof-mounted mast.
An antenna is a conductive print laminated into the glass during manufacture, typically used for radio, DAB (digital audio broadcasting) or television reception. It replaces the traditional roof-mounted aerial mast found on older vehicles. The antenna is integrated into the glass interlayer and connected to the vehicle's receiver unit via a connector embedded in the glass edge. This design offers a cleaner aesthetic, reduces wind noise, and eliminates the vulnerability of a protruding mast to damage or theft.
Check your vehicle's roof — if there is no visible aerial mast, your car likely has a laminated antenna. You can also ask your dealer or service centre whether your windscreen or rear window carries an antenna print. The connector may be visible on the glass edge or inside the door frame trim.
When replacing glass with a laminated antenna, the replacement must carry the matching antenna print and connector to restore reception immediately on fitting. Aftermarket or original-equipment glass with the correct antenna specification is essential; a plain replacement will leave you without radio or DAB signal. Our fitters verify the antenna specification during booking and source the correct variant before the appointment.
A blue-tinted gradient band across the top of your windscreen that reduces glare without affecting your view of the road.
A blue sun strip is a tinted gradient band built into the upper edge of your windscreen's laminate layer. It reduces glare from sunlight reflecting off the road and bonnet without darkening your main field of vision. The tint is created during manufacture as part of the glass laminate itself — it cannot be added or removed later. Sun strips are a windscreen-only feature; rear and side windows cannot carry this effect because they use tempered rather than laminated glass.
Look at the top of your windscreen from inside the car — you'll see a distinct blue-tinted band running horizontally across the upper portion. Check your vehicle's specification sheet or ask your dealership service centre whether your windscreen is listed as a 'blue sun strip' or 'tinted sun strip' variant. Your invoice or parts manual will confirm it.
When replacing a windscreen with a blue sun strip, the replacement must be the sun-strip variant — a standard plain windscreen will not replicate the tinted band. Your replacement glass is sourced as an exact match to your original specification. There are no additional calibration or cure implications beyond a standard windscreen replacement. Fitting and drive-away times remain unchanged.
Acoustic glass reduces cabin noise for a quieter, more comfortable ride.
Acoustic windscreen glass is laminated with a special acoustic interlayer that absorbs and dampens sound vibrations. It reduces exterior noise—from traffic, wind, and road surface—before it enters the passenger compartment. This makes the cabin noticeably quieter and creates a more peaceful driving experience. It's a comfort feature, not a safety one; standard laminated windscreens already meet impact safety requirements.
Check your windscreen for an ear symbol, the word 'Acoustic', a capital 'A', or the term 'SoundScreen' printed in one of the four corners. These markings indicate acoustic-grade glass. You can also ask your vehicle's dealership or service centre whether your model came fitted with acoustic glass—it's often a factory option on comfort or premium trims.
Acoustic glass is always laminated and bonds to the frame like any standard windscreen, so replacement follows the normal bonded-glass procedure. No specialist calibration is required. The replacement technician will fit it using standard adhesive and sealant. Cure time and drive-away restrictions are identical to standard laminated windscreens. Acoustic glass is widely available as an aftermarket OE-equivalent option.
Heated windscreens use embedded wires to quickly clear ice and condensation in cold weather.
A heated windscreen is integrated with a fine mesh of electrical wires embedded within the glass itself. When activated, these wires generate heat to warm the windscreen surface, helping to rapidly clear frost, ice, and condensation during cold or damp conditions. This feature improves visibility and safety in winter driving and reduces reliance on engine heat and demister air, which can be slower on very cold mornings.
Check your vehicle's handbook or contact your dealership service centre — they can confirm whether your model includes this feature. Look for a dashboard symbol (usually a windscreen icon with heat waves) when you activate the function, or check your infotainment settings for a heating or climate option linked to the windscreen. Some vehicles have a dedicated button on the stalk or console.
Heated windscreens require replacement glass to be of the correct heated specification — standard unheated glass cannot be fitted. The replacement glass must be sourced to match your vehicle's exact heated-wire configuration. Installation is straightforward, though the technician will confirm the heating element is functioning correctly after fitting. No calibration is required for this feature.
Your wipers automatically activate when rain falls on the windscreen.
A rain sensor is a device mounted on or behind the windscreen that detects moisture and triggers the wiper system automatically. The sensor uses infrared light to measure water droplets on the glass surface and signals the vehicle's electrical system to engage the wipers without driver input. This feature improves safety in sudden downpours and reduces driver workload in variable weather conditions.
Check your windscreen for a small sensor unit, usually mounted near the top centre behind the glass or at the base of the mirror. Look for a small dark component or lens. If your vehicle has automatic wipers that activate without you toggling the stalk, you have a rain sensor. Ask your dealer or service centre to confirm; they can check your vehicle records or wiper module settings.
Rain sensors are non-structural elements and do not require recalibration after windscreen replacement. The sensor bracket or mounting may need careful removal and reinstallation to ensure it sits correctly behind the new glass. If the sensor itself is damaged during removal, a replacement unit may be needed. Your fitter will confirm the condition and refit or replace the sensor as part of the standard replacement procedure.
The Aston Martin V8 Vantage has been a hallmark of British performance engineering since 2005, evolving through multiple generations with increasingly sophisticated glass technology.
All windscreens in our catalogue carry a subtle green tint and a VIN notch at the base — standard across the range. Two-thirds of active variants include a blue sun strip at the top, reducing glare without affecting visibility, and around two-thirds also feature an antenna laminated into the glass for radio and DAB reception.
Some variants incorporate acoustic glass for enhanced cabin quietness, whilst selected models come equipped with heated windscreens — a feature that becomes essential in UK winters. ADAS camera calibration may apply to some variants and will be confirmed at the quote stage.
Own a different Aston Martin? We've got you — every variant, every year.
The questions customers ask us most often.
