EB
Emma B.
Verified on Trustpilot15 May 2026
I would highly recommend this company
I would highly recommend this company, good customer service, very good technician and one very happy customer
Seat Altea rear window replacement — booked online.
Instant quote for your Seat Altea rear window across six variants — booked online in under two minutes and fitted by approved fitters near you.
Prices from £315 to £567
4.82 / 5 ·
1,456 Trustpilot reviews
Get your quote
Under 60 secondsMake
Seat
Model
Altea
No card required · Free to quote
- Instant online prices
- Vetted specialist network
- OEE glass, factory-spec match
- 2-year workmanship warranty
Seat Altea rear window price, by year
Prices vary based on which specific variant you own — encapsulation availability, tint type, and integrated hardware such as brake lights or antenna all affect the replacement cost. Earlier Alteas without these features are generally the most straightforward, while models with solar control or integrated lighting carry higher supply and fitting complexity.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2010 | £551 — £567 | 2 variants | Price my 2010 |
| 2009 | £315 — £567 | 6 variants | Price my 2009 |
| 2008 | £315 — £567 | 6 variants | Price my 2008 |
| 2007 | £315 — £567 | 6 variants | Price my 2007 |
| 2006 | £315 — £567 | 6 variants | Price my 2006 |
| 2005 | £315 — £567 | 6 variants | Price my 2005 |
| 2004 | £315 — £567 | 6 variants | Price my 2004 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older Alteas can still be booked.
Recent UK Car Glass reviews
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.82/5 from 1,456 Trustpilot reviews.
What to expect during your Seat Altea rear window replacement
Booking your Altea rear-window replacement through UK Car Glass is straightforward.
- 1
Answer a quick online quiz about your Altea's year and trim — takes about a minute.
- 2
Receive an instant quote and choose a date that suits you — mobile fitting at your address or a local workshop.
- 3
Our parts team confirms your exact glass variant matches your factory specification.
- 4
A specialist fitter from our network attends on the day, removes the shattered rear window, and fits your replacement.
- 5
Because rear windows shatter, shard cleanup is part of the job — your fitter will remove accessible glass, though a professional interior valet afterwards is recommended for thorough detailing.
- 6
Your replacement is covered by a two-year warranty on workmanship and glass quality.
From quote to fitted glass, most jobs complete within a couple of hours.
Mobile fitting or workshop visit for your Altea?
Most Seat Altea rear-window replacements can be carried out at your home or workplace via mobile fitting — your fitter arrives with all the tools needed and clears accessible shards as part of the job.
Workshop visits are not typically required for rear-window fitting on the Altea, though you may prefer a workshop location for convenience or weather protection. Simply let us know your preference when booking.
We confirm the specific answer for your vehicle when you book.
What features does your Altea have?
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Heated Rear Windscreen6
2004–2010Heated rear windscreen with integrated wires clears mist and ice when you switch on the demister.
What it means
A heated rear windscreen contains fine heating wires embedded within the glass. When you activate the rear demister, an electrical current passes through these wires, warming the glass and melting ice or condensation. This feature is particularly useful in cold or damp weather, improving rear visibility quickly. The heating grid is integral to the glass and connected to your vehicle's electrical circuit via connectors at the base of the windscreen.
How to tell
Look at the rear windscreen from inside the vehicle — you will see a fine grid of horizontal lines across the glass, typically bronze or copper in colour. On the dashboard or steering wheel stalk, there will be a dedicated rear-demist button, usually marked with a windscreen symbol and heating lines. If in doubt, ask your vehicle's service centre or consult your handbook.
Replacement impact
Replacement rear windscreens with heated grids are widely available as original-equipment aftermarket or dealership parts. The new glass must include the factory heating grid and electrical connectors intact. The technician will reconnect the heating circuit to your vehicle's rear-demist switch. Heated rear windscreens are bonded glass, so adhesive cure time applies; drive-away time will be confirmed by the fitter on the day.
Green3
2004–2010Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
What it means
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
How to tell
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Replacement impact
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
Green Privacy3
2004–2010Dark green tint on rear and side windows is a factory colour choice, not a safety or performance feature.
What it means
Dark green is a factory tint applied to the glass during manufacture. It's purely aesthetic — a colour variant chosen by the vehicle designer to complement the body paint and interior trim. Unlike some tints that reduce solar heat or glare, dark green is decorative. Most vehicles have standard or light green glass; dark green is less common and typically found on specific trim levels or model years.
How to tell
Look at your rear and side windows from outside the car in daylight. If they appear noticeably darker or more saturated green than the front windscreen, you likely have dark green glass. You can also check your vehicle's specification sheet from the dealer or original documentation — tint colour is sometimes listed under 'glass' or 'exterior finishes'. If uncertain, ask your local dealership service centre.
Replacement impact
Dark green replacement glass must match the original tint colour exactly — a standard or light green windscreen will look visibly mismatched against dark green rear windows. Sourcing the correct variant can take slightly longer than standard glass, as it's less common. No calibration is involved with tinted glass itself. Fitting and cure time are unaffected.
Solar Control3
2004–2010Solar control glass absorbs infrared rays to reduce heat and improve cabin comfort.
What it means
Solar control is a coating applied to the windscreen that absorbs the sun's infrared radiation rather than allowing it to pass through into the cabin. This reduces solar heat gain, helping to keep the interior cooler and more comfortable, particularly in warm weather or direct sunlight. The coating is transparent to visible light, so it doesn't darken the windscreen or affect visibility. It's a passive thermal management feature that works continuously whenever the sun is shining on the glass.
How to tell
Check your vehicle's specification sheet or contact your dealership service centre to confirm whether solar control glass is fitted. Some manufacturers list it as 'solar control windscreen', 'heat-reflective glass', or 'thermal management glass'. It's a factory-fitted feature and won't be visibly obvious from outside the car — the coating is integral to the glass itself.
Replacement impact
Solar control glass is a factory-fitted specification. When replacing the windscreen, a solar control variant must be sourced to match the original. This is a standard glass type with no special fitting implications or calibration requirements. Cure and drive-away times follow normal windscreen bonding procedures. Confirm with your fitter that the replacement glass includes solar control to maintain the original thermal performance.
Antenna2
2004–2010An aerial laminated into the windscreen or rear window restores radio, DAB or TV reception without a roof-mounted mast.
What it means
An antenna is a conductive print laminated into the glass during manufacture, typically used for radio, DAB (digital audio broadcasting) or television reception. It replaces the traditional roof-mounted aerial mast found on older vehicles. The antenna is integrated into the glass interlayer and connected to the vehicle's receiver unit via a connector embedded in the glass edge. This design offers a cleaner aesthetic, reduces wind noise, and eliminates the vulnerability of a protruding mast to damage or theft.
How to tell
Check your vehicle's roof — if there is no visible aerial mast, your car likely has a laminated antenna. You can also ask your dealer or service centre whether your windscreen or rear window carries an antenna print. The connector may be visible on the glass edge or inside the door frame trim.
Replacement impact
When replacing glass with a laminated antenna, the replacement must carry the matching antenna print and connector to restore reception immediately on fitting. Aftermarket or original-equipment glass with the correct antenna specification is essential; a plain replacement will leave you without radio or DAB signal. Our fitters verify the antenna specification during booking and source the correct variant before the appointment.
Brake Light2
2004–2009A brake light integrated into the rear window glass itself, requiring a matching replacement to reconnect the original lighting circuit.
What it means
A brake light integrated into the rear window glass is a lighting element built directly into the glass panel during manufacturing. Rather than using a separate lamp cluster mounted to the vehicle body, the light circuit is routed through conductive elements — typically a silkscreen pattern, wire network, or bracket assembly — embedded in or bonded to the glass itself. When you brake, this integrated light illuminates to warn following traffic. It combines functionality with design integration, reducing the number of separate components on the rear of the vehicle.
How to tell
Check your vehicle's rear window for a visible pattern of fine lines or wires running across the glass, usually near the top edge or spanning the upper portion. Look at your vehicle's manual or contact your dealer's service centre — they can confirm whether your rear window carries an integrated brake light. If you see a separate brake-light cluster mounted to the bodywork instead, your vehicle does not have this feature.
Replacement impact
The replacement rear window must carry the identical integrated brake-light pattern so the original lighting circuit reconnects without modification. The conductive elements — whether silkscreen, wiring, or bracket fittings — must align precisely with the vehicle's electrical connections. Using a standard rear window without this pattern would disable the brake light. We source the correct OE-specification glass to ensure a seamless fit and restore full functionality.
About the Seat Altea
The Seat Altea ran from 2004 to 2010 as a compact multi-purpose vehicle, offering practical family transport across a single generation. Its rear window is typically toughened glass — designed to shatter safely on impact rather than crack — and many variants feature tint options ranging from subtle green to darker privacy tint.
Rear-window variants in our catalogue carry several factory options including encapsulated edges (a pre-bonded gasket that simplifies fitting), solar-control coatings to reduce cabin heat, and integrated hardware like brake lights or antenna connections. These features are distributed across the six active variants we hold.
Other Seat models
Own a different Seat? We've got you — every variant, every year.
Frequently asked questions
The questions customers ask us most often.