Instant quote for your LEVC TX Vista windscreen in under 60 seconds, fitted by approved fitters — booked in under two minutes.
Make
LEVC-TX
Model
Vista
No card required · Free to quote
Pricing for your TX windscreen reflects the presence of factory-integrated ADAS camera and heated-glass technology. Calibration is included as part of the service — it runs in parallel with the adhesive cure, so it doesn't extend your drive-away time.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2026 | £884 — £884 | 1 variant | Price my 2026 |
| 2025 | £884 — £884 | 1 variant | Price my 2025 |
| 2024 | £884 — £884 | 1 variant | Price my 2024 |
| 2023 | £884 — £884 | 1 variant | Price my 2023 |
| 2022 | £884 — £884 | 1 variant | Price my 2022 |
| 2021 | £884 — £884 | 1 variant | Price my 2021 |
| 2020 | £884 — £884 | 1 variant | Price my 2020 |
| 2019 | £884 — £884 | 1 variant | Price my 2019 |
| 2018 | £884 — £884 | 1 variant | Price my 2018 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older Vistas can still be booked.
Curious why prices vary so widely? Read our UK windscreen replacement cost guide .
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.82/5 from 1,422 Trustpilot reviews.
Booking your TX windscreen replacement is straightforward and transparent.
Complete a quick online quote via our widget in about a minute — we'll confirm your exact specification.
Our parts team validates the glass variant and confirms availability with specialist suppliers.
You'll be matched with an approved fitter in your area who specialises in camera-equipped vehicles.
On the fitting day, the fitter arrives with your replacement glass, removes the old windscreen, and fits the new one with all camera brackets reinstalled.
Static camera calibration is completed immediately after the glass is set, using target boards in a controlled workshop environment.
Your fitter confirms the drive-away time before you leave — typically a few hours to allow the adhesive to cure fully.
Your replacement is covered by a two-year warranty on workmanship and glass quality.
Because your TX windscreen includes a factory-integrated camera system, recalibration is required after replacement. This is completed using static target boards in a controlled workshop environment, so the fitting is scheduled at a workshop rather than mobile at your address.
This ensures precision and keeps you accountable — the camera's accuracy is safety-critical for your driver assistance systems. Drive-away time is confirmed by your fitter on the day and isn't extended by the calibration process.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
Heated windscreens use embedded wires to quickly clear ice and condensation in cold weather.
A heated windscreen is integrated with a fine mesh of electrical wires embedded within the glass itself. When activated, these wires generate heat to warm the windscreen surface, helping to rapidly clear frost, ice, and condensation during cold or damp conditions. This feature improves visibility and safety in winter driving and reduces reliance on engine heat and demister air, which can be slower on very cold mornings.
Check your vehicle's handbook or contact your dealership service centre — they can confirm whether your model includes this feature. Look for a dashboard symbol (usually a windscreen icon with heat waves) when you activate the function, or check your infotainment settings for a heating or climate option linked to the windscreen. Some vehicles have a dedicated button on the stalk or console.
Heated windscreens require replacement glass to be of the correct heated specification — standard unheated glass cannot be fitted. The replacement glass must be sourced to match your vehicle's exact heated-wire configuration. Installation is straightforward, though the technician will confirm the heating element is functioning correctly after fitting. No calibration is required for this feature.
A single camera mounted near the rear-view mirror that helps with lane-keeping and collision avoidance.
A mono camera is a single-lens camera positioned behind the windscreen, typically in the upper centre area near the rear-view mirror. It captures the road ahead and uses computer vision to detect lane markings, vehicles, and road hazards. The camera feeds data to driver-assistance systems such as lane-keeping assist, lane-departure warning, and forward-collision warning. It forms the visual foundation of these safety features, allowing the vehicle to monitor road position and surrounding traffic automatically.
Look in the black trim area above the windscreen, centred behind the rear-view mirror — you will see a small triangular lens assembly or dark lens cover. Check your vehicle handbook or ask your dealer's service department to confirm your model has lane-assistance or collision-warning features; vehicles with these systems almost always have a mono camera. Dashboard warning symbols related to lane or collision systems also indicate the presence of this camera.
When the windscreen is replaced, the camera bracket and lens assembly must be removed and carefully repositioned on the new glass. The camera may require calibration after fitting to ensure accurate road detection and lane recognition. Calibration needs vary by vehicle — we confirm the exact procedure when we look up your specific vehicle. The job may take longer than a standard windscreen replacement, and workshop facilities may be required if calibration demands a controlled environment.
Your wipers automatically activate when rain falls on the windscreen.
A rain sensor is a device mounted on or behind the windscreen that detects moisture and triggers the wiper system automatically. The sensor uses infrared light to measure water droplets on the glass surface and signals the vehicle's electrical system to engage the wipers without driver input. This feature improves safety in sudden downpours and reduces driver workload in variable weather conditions.
Check your windscreen for a small sensor unit, usually mounted near the top centre behind the glass or at the base of the mirror. Look for a small dark component or lens. If your vehicle has automatic wipers that activate without you toggling the stalk, you have a rain sensor. Ask your dealer or service centre to confirm; they can check your vehicle records or wiper module settings.
Rain sensors are non-structural elements and do not require recalibration after windscreen replacement. The sensor bracket or mounting may need careful removal and reinstallation to ensure it sits correctly behind the new glass. If the sensor itself is damaged during removal, a replacement unit may be needed. Your fitter will confirm the condition and refit or replace the sensor as part of the standard replacement procedure.
A printed VIN reference box along the bottom edge of your windscreen helps identify your vehicle's chassis number at a glance.
A VIN (Vehicle Identification Number) notch is a small printed or etched box positioned along the lower edge of the windscreen that displays your vehicle's chassis number. This reference marking is a manufacturing and administrative feature, allowing quick visual identification of the vehicle without needing to consult documents. It's particularly useful for service records, insurance claims, and vehicle registration purposes. The notch itself doesn't affect the structural integrity or safety performance of the glass.
Look along the bottom edge of your windscreen — typically in one of the lower corners — for a small rectangular box containing printed digits or characters. If you're uncertain, check your vehicle's service handbook or ask your dealership or service centre to confirm whether your model includes this feature.
When your windscreen is replaced, the new glass will retain the VIN notch printed or etched by the manufacturer. This is a standard feature on replacement windscreens for compatible vehicles and requires no additional work or adjustment. The notch does not affect glass fitting, cure time, or any post-replacement calibration procedures.
The LEVC TX is a purpose-built, range-extender electric hackney carriage that entered production in 2017. Its windscreen carries several modern safety and comfort features as standard across the range.
From the outset, the TX has been equipped with a front-facing driver assistance camera, rain sensors, and a heated windscreen — features that enhance both safety and usability in London's demanding taxi environment. These systems are integrated into the windscreen itself, making replacement more involved than older vehicles.
When your windscreen is replaced, the camera system requires recalibration to restore its original functionality. Your fitter will handle this as part of the service, typically at a workshop to ensure precision.
The questions customers ask us most often.
