Infiniti Q30 windscreen replacement with instant quote and ADAS camera calibration — booked online in under two minutes.
Make
Infiniti
Model
Q30
No card required · Free to quote
Price variation on the Q30 is primarily driven by whether your specific variant includes the Safety Shield 360 camera package — all Q30 windscreens in our catalogue carry this feature, which means static calibration is required after replacement. Calibration adds technician time and requires workshop access to the target boards and diagnostic equipment, which is reflected in the overall cost compared to non-ADAS models.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2019 | £1,117 — £1,117 | 1 variant | Price my 2019 |
| 2018 | £1,117 — £1,117 | 1 variant | Price my 2018 |
| 2017 | £1,117 — £1,117 | 1 variant | Price my 2017 |
| 2016 | £1,117 — £1,117 | 1 variant | Price my 2016 |
| 2015 | £1,117 — £1,117 | 1 variant | Price my 2015 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older Q30s can still be booked.
Curious why prices vary so widely? Read our UK windscreen replacement cost guide .
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.82/5 from 1,422 Trustpilot reviews.
Booking your Q30 windscreen replacement through UKCG is a straightforward, guided process.
Answer a quick quiz about your Q30's year and features — takes about a minute.
Receive an instant quote with no hidden charges.
Choose your preferred booking date and whether you'd prefer mobile at home or workshop fitting.
Our parts team confirms your exact windscreen variant and ADAS specification before the job is scheduled.
A technician near you is matched to your booking and completes the replacement and static camera calibration (typically at a workshop so the calibration targets can be set up properly).
You're given a confirmed drive-away time before the technician leaves, and your replacement is covered by a two-year warranty on workmanship and glass quality.
From booking to replacement, the whole process is handled by specialists on our network who are experienced with ADAS-equipped Infinitis.
All Q30 windscreen replacements are scheduled at a workshop rather than mobile at your home. Because your Q30 includes the Safety Shield 360 camera system, static calibration is required after the glass is fitted — this must be done indoors using printed target boards positioned at precise distances in front of the vehicle.
The technician completes both the glass replacement and calibration in a single workshop visit, so you avoid split appointments and are certain the safety-critical calibration is finished before you drive away.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Your wipers automatically activate when rain falls on the windscreen.
A rain sensor is a device mounted on or behind the windscreen that detects moisture and triggers the wiper system automatically. The sensor uses infrared light to measure water droplets on the glass surface and signals the vehicle's electrical system to engage the wipers without driver input. This feature improves safety in sudden downpours and reduces driver workload in variable weather conditions.
Check your windscreen for a small sensor unit, usually mounted near the top centre behind the glass or at the base of the mirror. Look for a small dark component or lens. If your vehicle has automatic wipers that activate without you toggling the stalk, you have a rain sensor. Ask your dealer or service centre to confirm; they can check your vehicle records or wiper module settings.
Rain sensors are non-structural elements and do not require recalibration after windscreen replacement. The sensor bracket or mounting may need careful removal and reinstallation to ensure it sits correctly behind the new glass. If the sensor itself is damaged during removal, a replacement unit may be needed. Your fitter will confirm the condition and refit or replace the sensor as part of the standard replacement procedure.
A glass variant made specifically for right-hand-drive vehicles like UK cars, with brackets and sensors positioned for the driver's side.
Right-hand-drive glass is a windscreen (or other glass panel) manufactured to the correct specification for vehicles where the steering wheel and driver controls are on the right side of the car. The key difference isn't the glass itself but the position of brackets, sensor mounting pads, and sometimes a VIN (Vehicle Identification Number) notch. These are placed on the dashboard side to align with right-hand-drive vehicle architecture. Using the correct variant ensures all safety systems, mounting points, and sensor arrays sit in the right place when the glass is fitted.
Check your vehicle's specification sheet or service handbook — it will confirm 'RHD' (right-hand drive). Ask your dealership or service centre which windscreen variant they stock for your model. If you're unsure, provide us with your registration number when you book; we'll identify the correct part.
UKCG stocks the UK-specific right-hand-drive variant, so all brackets, sensors, and mounting points align correctly during fitting. Using a left-hand-drive part on a right-hand-drive vehicle would result in misalignment of camera brackets, rain sensors, or other dashboard-mounted components. We confirm you receive the correct RHD variant before dispatch.
Static calibration uses printed targets indoors to align your forward-facing camera after windscreen replacement.
Static camera calibration is a procedure in which a forward-facing camera system is realigned using printed target boards positioned at manufacturer-specified distances and heights in front of the vehicle. The vehicle remains stationary indoors throughout. A diagnostic tool reads the camera's view of these targets and adjusts the camera's alignment to factory specification. This ensures the camera can accurately detect road features, lane markings, pedestrians, and other objects — critical for driver-assistance systems like lane-keeping, collision warning, and adaptive cruise control to function safely and reliably.
Check your vehicle's handbook or ask your dealer's service centre whether your car has a forward-facing camera system that requires calibration after windscreen replacement. Look for driver-assistance features like lane-keeping assist, autonomous emergency braking, or adaptive cruise control on the dashboard menu. If your vehicle manual mentions 'camera calibration' or 'static target calibration', static calibration is likely part of your windscreen replacement service.
When a windscreen with an integrated or bracket-mounted camera is replaced, the camera's alignment can shift. Static calibration realigns the camera using indoor target boards, which must be performed in a workshop environment where printed targets can be positioned and secured at precise distances. This procedure is conducted after the windscreen is fitted and bonded. The workshop booking accommodates the additional time required for calibration, and we apply the no-split policy — both replacement and calibration happen at the same location on the same visit.
A printed VIN reference box along the bottom edge of your windscreen helps identify your vehicle's chassis number at a glance.
A VIN (Vehicle Identification Number) notch is a small printed or etched box positioned along the lower edge of the windscreen that displays your vehicle's chassis number. This reference marking is a manufacturing and administrative feature, allowing quick visual identification of the vehicle without needing to consult documents. It's particularly useful for service records, insurance claims, and vehicle registration purposes. The notch itself doesn't affect the structural integrity or safety performance of the glass.
Look along the bottom edge of your windscreen — typically in one of the lower corners — for a small rectangular box containing printed digits or characters. If you're uncertain, check your vehicle's service handbook or ask your dealership or service centre to confirm whether your model includes this feature.
When your windscreen is replaced, the new glass will retain the VIN notch printed or etched by the manufacturer. This is a standard feature on replacement windscreens for compatible vehicles and requires no additional work or adjustment. The notch does not affect glass fitting, cure time, or any post-replacement calibration procedures.
The Infiniti Q30 was produced from 2015 to 2019 as a premium compact hatchback, featuring a forward-facing windscreen camera as part of its Safety Shield 360 driver-assistance suite. This camera enables lane departure warning, lane keep assist, and forward collision warning — all features that depend on precise camera alignment behind the windscreen.
When your windscreen is replaced, the camera bracket and sensor positions are disturbed. Static camera calibration must be performed indoors using printed targets at manufacturer-specified distances to restore the system's reference frame for lane detection and collision avoidance. This ensures your Q30's safety systems function as originally designed.
The questions customers ask us most often.
