Aston Martin DB11 windscreen replacement — instant quote in under 60 seconds, fitted by approved fitters near you, booked online in under two minutes.
Make
Aston Martin
Model
DB11
No card required · Free to quote
Pricing for DB11 windscreen replacement is determined primarily by the glass specification — all variants carry the same premium feature set (acoustic, antenna, rain sensor, green tint, VIN notch). Calibration complexity, if required, and the technician's travel distance to your location are the main variables affecting the final quote.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2024 | £2,190 — £2,190 | 1 variant | Price my 2024 |
| 2023 | £2,190 — £2,190 | 1 variant | Price my 2023 |
| 2022 | £2,190 — £2,190 | 1 variant | Price my 2022 |
| 2021 | £2,190 — £2,190 | 1 variant | Price my 2021 |
| 2020 | £2,190 — £2,190 | 1 variant | Price my 2020 |
| 2019 | £2,190 — £2,190 | 1 variant | Price my 2019 |
| 2018 | £2,190 — £2,190 | 1 variant | Price my 2018 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older DB11s can still be booked.
Curious why prices vary so widely? Read our UK windscreen replacement cost guide .
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.82/5 from 1,456 Trustpilot reviews.
Booking your DB11 windscreen replacement is straightforward and takes just a couple of minutes online.
Start with our quick quote tool — answer a few questions about your DB11 and receive an instant quotation.
Proceed to checkout and confirm your preferred fitting date and location (mobile at your address or at a local workshop).
We match you with an approved fitter in your area who will contact you to confirm the booking details.
On fitting day, the technician arrives with your replacement glass, checks that it matches your factory specification, and completes the replacement — typically within a couple of hours depending on your location and any calibration requirements.
Your fitter will confirm the minimum drive-away time before they leave, and you'll receive a two-year warranty on the workmanship and glass quality.
Specialists on our network handle all the complexity — you just drive away confident in your new windscreen and our guarantee.
Most DB11 windscreen replacements can be arranged at your preferred location — mobile fitting at your address or at a partner workshop. However, if your DB11 is equipped with ADAS camera systems (confirmed during the quote), calibration may be required after replacement.
When calibration is necessary, the entire job is scheduled at a workshop to ensure the camera is properly aligned using precision target boards in a controlled environment. This keeps you accountable and eliminates the risk of missing a safety-critical step.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Acoustic glass reduces cabin noise for a quieter, more comfortable ride.
Acoustic windscreen glass is laminated with a special acoustic interlayer that absorbs and dampens sound vibrations. It reduces exterior noise—from traffic, wind, and road surface—before it enters the passenger compartment. This makes the cabin noticeably quieter and creates a more peaceful driving experience. It's a comfort feature, not a safety one; standard laminated windscreens already meet impact safety requirements.
Check your windscreen for an ear symbol, the word 'Acoustic', a capital 'A', or the term 'SoundScreen' printed in one of the four corners. These markings indicate acoustic-grade glass. You can also ask your vehicle's dealership or service centre whether your model came fitted with acoustic glass—it's often a factory option on comfort or premium trims.
Acoustic glass is always laminated and bonds to the frame like any standard windscreen, so replacement follows the normal bonded-glass procedure. No specialist calibration is required. The replacement technician will fit it using standard adhesive and sealant. Cure time and drive-away restrictions are identical to standard laminated windscreens. Acoustic glass is widely available as an aftermarket OE-equivalent option.
An aerial laminated into the windscreen or rear window restores radio, DAB or TV reception without a roof-mounted mast.
An antenna is a conductive print laminated into the glass during manufacture, typically used for radio, DAB (digital audio broadcasting) or television reception. It replaces the traditional roof-mounted aerial mast found on older vehicles. The antenna is integrated into the glass interlayer and connected to the vehicle's receiver unit via a connector embedded in the glass edge. This design offers a cleaner aesthetic, reduces wind noise, and eliminates the vulnerability of a protruding mast to damage or theft.
Check your vehicle's roof — if there is no visible aerial mast, your car likely has a laminated antenna. You can also ask your dealer or service centre whether your windscreen or rear window carries an antenna print. The connector may be visible on the glass edge or inside the door frame trim.
When replacing glass with a laminated antenna, the replacement must carry the matching antenna print and connector to restore reception immediately on fitting. Aftermarket or original-equipment glass with the correct antenna specification is essential; a plain replacement will leave you without radio or DAB signal. Our fitters verify the antenna specification during booking and source the correct variant before the appointment.
Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
Heat-absorbing PVB interlayer reduces solar gain and cabin temperature on warm days—but must match your original spec.
Heat-absorbing PVB is a specially formulated interlayer sandwiched between the glass plies in your windscreen. It absorbs a portion of the sun's infrared radiation before it enters the cabin, reducing solar heat gain on warm days. This keeps the interior cooler and reduces air-conditioning workload. The feature is built into the glass during manufacture and cannot be added or removed after production. If your vehicle left the factory with this interlayer, any replacement windscreen must carry the same PVB specification to maintain the original thermal performance.
Check your vehicle's specification sheet or handbook—heat-absorbing PVB is listed under windscreen or glass specification. You can also ask your dealership service centre or provide us with your vehicle registration; we'll confirm whether your car came with this feature as standard or as an option.
Replacement windscreens with heat-absorbing PVB must be sourced to the exact OE specification—aftermarket alternatives with standard PVB will not deliver the same solar-control performance. We ensure the correct spec is ordered before the fit. No calibration is required. Installation and cure procedures are identical to standard windscreen replacement; the interlayer is integral to the glass and requires no additional treatment.
Your wipers automatically activate when rain falls on the windscreen.
A rain sensor is a device mounted on or behind the windscreen that detects moisture and triggers the wiper system automatically. The sensor uses infrared light to measure water droplets on the glass surface and signals the vehicle's electrical system to engage the wipers without driver input. This feature improves safety in sudden downpours and reduces driver workload in variable weather conditions.
Check your windscreen for a small sensor unit, usually mounted near the top centre behind the glass or at the base of the mirror. Look for a small dark component or lens. If your vehicle has automatic wipers that activate without you toggling the stalk, you have a rain sensor. Ask your dealer or service centre to confirm; they can check your vehicle records or wiper module settings.
Rain sensors are non-structural elements and do not require recalibration after windscreen replacement. The sensor bracket or mounting may need careful removal and reinstallation to ensure it sits correctly behind the new glass. If the sensor itself is damaged during removal, a replacement unit may be needed. Your fitter will confirm the condition and refit or replace the sensor as part of the standard replacement procedure.
A printed VIN reference box along the bottom edge of your windscreen helps identify your vehicle's chassis number at a glance.
A VIN (Vehicle Identification Number) notch is a small printed or etched box positioned along the lower edge of the windscreen that displays your vehicle's chassis number. This reference marking is a manufacturing and administrative feature, allowing quick visual identification of the vehicle without needing to consult documents. It's particularly useful for service records, insurance claims, and vehicle registration purposes. The notch itself doesn't affect the structural integrity or safety performance of the glass.
Look along the bottom edge of your windscreen — typically in one of the lower corners — for a small rectangular box containing printed digits or characters. If you're uncertain, check your vehicle's service handbook or ask your dealership or service centre to confirm whether your model includes this feature.
When your windscreen is replaced, the new glass will retain the VIN notch printed or etched by the manufacturer. This is a standard feature on replacement windscreens for compatible vehicles and requires no additional work or adjustment. The notch does not affect glass fitting, cure time, or any post-replacement calibration procedures.
The Aston Martin DB11, produced from 2016 onwards, represents the marque's modern grand tourer with sophisticated engineering throughout. Its windscreen carries several premium features as standard, including acoustic laminated glass for cabin refinement and a rain sensor for automatic wiper activation.
The DB11's windscreen also integrates an antenna for radio and digital reception, and features a VIN notch along the lower edge for chassis identification. All variants from 2018 onwards — the focus of our catalogue — carry green-tinted glass as standard, a characteristic feature of Aston Martin's aesthetic.
While Aston Martin's ADAS systems are known to require camera recalibration after windscreen replacement, specific model-year rollout details for the DB11 are not publicly documented. Our technicians confirm calibration requirements on booking.
Own a different Aston Martin? We've got you — every variant, every year.
The questions customers ask us most often.
