Rear window replacement for your 2004–2009 Toyota Corolla Verso — matched to your variant and fitted by approved technicians in your area.
Make
Toyota
Model
Corolla Verso
No card required · Free to quote
Pricing varies based on whether your variant carries the darker privacy tint or the standard green tint, and the encapsulated gasket design adds a small premium compared to non-encapsulated alternatives. Specialist technicians on our network source replacement glass matched to your factory specification, ensuring a clean fit with no trim adjustment needed.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2009 | £532 — £589 | 2 variants | Price my 2009 |
| 2008 | £532 — £589 | 2 variants | Price my 2008 |
| 2007 | £532 — £589 | 2 variants | Price my 2007 |
| 2006 | £532 — £589 | 2 variants | Price my 2006 |
| 2005 | £532 — £589 | 2 variants | Price my 2005 |
| 2004 | £532 — £589 | 2 variants | Price my 2004 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older Corolla Versos can still be booked.
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.82/5 from 1,422 Trustpilot reviews.
Rear window replacement is a straightforward process handled in a few stages.
Start with a quick online quote — answer a few questions about your Corolla Verso variant (year, features) and you'll see pricing in under 60 seconds.
Once booked, our team runs a parts check to confirm the exact glass specification and arrange collection from a supplier near your chosen technician.
You'll be matched with an approved technician in your area and can choose a mobile visit to your home or a workshop appointment.
On the day, the technician removes the shattered glass — shard cleanup is a significant part of the job — and fits the new encapsulated panel with its gasket already in place.
Broken glass can lodge in places the fitter can't easily reach (under seats, trim channels, boot linings), so we recommend booking a professional valet afterwards for a thorough interior clean.
Your replacement is covered by a two-year warranty against manufacturing defects and workmanship issues.
The whole process, from quote to booking to fitting, takes just a few minutes online and typically completes within a couple of hours on the day.
Rear window replacement on the Corolla Verso is typically carried out as a mobile visit to your home — the technician arrives with all necessary tools and brings the new glass pre-matched to your variant. A workshop visit is not usually required unless you prefer it or if poor weather makes a safe outdoor fit difficult.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Factory-bonded rubber or polymer trim means your replacement glass arrives ready to fit as one complete unit.
Encapsulation is a rubber or polymer gasket moulded directly onto the glass edges during manufacturing. The trim is bonded to the glass at the factory — either by injection moulding, PU robot extrusion, or adhesive bonding. When you need a replacement, the entire panel arrives with its trim already attached, so the glass and gasket are replaced together as a single unit rather than as separate components.
Check your current windscreen or rear window edges. If you see a continuous rubber or polymer seal running around the perimeter that appears moulded or permanently bonded to the glass itself — rather than a separate trim clipped or screwed to the frame — your glass is encapsulated. Ask your dealer or service centre to confirm; they can also check your vehicle specification sheet.
Encapsulated glass simplifies replacement because there's no separate trim to remove, refit, or source. The bonded gasket is replaced as part of the glass unit, which reduces installation complexity and potential leak points. Cure time and drive-away procedures remain unchanged. No additional sourcing delays — encapsulated replacements are stocked as complete assemblies by most suppliers.
Dark grey tint on rear windows provides privacy and reduces interior heat and glare.
Dark grey tint, formally known as privacy glass, is a factory-applied tint created through a deep-dipping process during glass manufacture. The pigment is infused into the inner surface of the glass, darkening the rear windows (and sometimes rear doors) significantly more than the front. This reduces heat transmission, minimises glare, and obscures the interior from outside view. It's standard on the rear half of many modern vehicles.
Compare the rear side windows and rear window (backlight) to the front side windows — the rear glass will be noticeably darker. Check your vehicle documents or ask your dealership service centre if you're unsure whether your car left the factory with privacy glass.
Dark grey tinted glass must be sourced from the Original Equipment Equivalent (OEE) or dealership to ensure colour and transmission match your vehicle's existing rear glass. The tint is integral to the glass itself, not a surface coating, so aftermarket non-tinted glass will look visibly mismatched. Replacement does not require any calibration and follows standard bonded-glass cure times for rear windows.
Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
The Toyota Corolla Verso is a compact MPV produced between 2004 and 2009, offering practical seven-seat versatility with a straightforward glass specification across its generation.
Rear windows on the Corolla Verso are typically toughened glass, meaning if they shatter due to impact or thermal stress, they fragment into small pebbles rather than large shards. All variants in our catalogue carry an encapsulated gasket — a pre-moulded rubber trim bonded directly to the glass edge at the factory — which simplifies replacement by allowing the panel and trim to be swapped as one unit.
Tint options vary slightly across the two active variants: some feature a subtle green tint (standard across Toyota's rear glazing at the time), while others include a darker grey tint on the rear door windows for additional privacy. Your specific variant is confirmed during the online quote.
Own a different Toyota? We've got you — every variant, every year.
The questions customers ask us most often.
