NM
Neil M.
Trustpilot27 Oct 2025
Just windscreen fitted been great…
Just had windscreen fitted been great service , kept me updated times etc and very happy with fitter's work .
Toyota Yaris rear window replacement — booked online.
Instant quote across 7 Toyota Yaris rear-window variants in under 60 seconds, fitted by approved fitters — booked in under two minutes.
Prices from £400 to £565
4.82 / 5 ·
1,422 Trustpilot reviews
Get your quote
Under 60 secondsMake
Toyota
Model
Yaris
No card required · Free to quote
- Instant online prices
- Vetted specialist network
- OEE glass, factory-spec match
- 2-year workmanship warranty
Toyota Yaris rear window price, by year
Prices vary based on your Yaris's generation and equipment level. Older non-tinted models are generally more straightforward; tinted variants and those with camera systems require specialist calibration, which affects the overall cost. The exact price depends on which of our 7 catalogued variants matches your vehicle.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2026 | £526 — £565 | 2 variants | Price my 2026 |
| 2025 | £526 — £565 | 2 variants | Price my 2025 |
| 2024 | £526 — £565 | 2 variants | Price my 2024 |
| 2023 | £526 — £565 | 2 variants | Price my 2023 |
| 2022 | £526 — £565 | 2 variants | Price my 2022 |
| 2021 | £526 — £565 | 2 variants | Price my 2021 |
| 2020 | £400 — £565 | 3 variants | Price my 2020 |
| 2019 | £400 — £484 | 3 variants | Price my 2019 |
| 2018 | £400 — £484 | 3 variants | Price my 2018 |
| 2017 | £400 — £484 | 3 variants | Price my 2017 |
| 2016 | £412 — £484 | 2 variants | Price my 2016 |
| 2015 | £412 — £484 | 2 variants | Price my 2015 |
| 2014 | £412 — £484 | 2 variants | Price my 2014 |
| 2013 | £412 — £484 | 2 variants | Price my 2013 |
| 2012 | £412 — £484 | 2 variants | Price my 2012 |
| 2011 | £410 — £484 | 4 variants | Price my 2011 |
| 2010 | £410 — £441 | 2 variants | Price my 2010 |
| 2009 | £410 — £441 | 2 variants | Price my 2009 |
| 2008 | £410 — £441 | 2 variants | Price my 2008 |
| 2007 | £410 — £441 | 2 variants | Price my 2007 |
| 2006 | £410 — £441 | 2 variants | Price my 2006 |
| 2005 | £410 — £426 | 2 variants | Price my 2005 |
| 2004 | £426 — £426 | 1 variant | Price my 2004 |
| 2003 | £426 — £426 | 1 variant | Price my 2003 |
| 2002 | £426 — £426 | 1 variant | Price my 2002 |
| 2001 | £426 — £426 | 1 variant | Price my 2001 |
| 2000 | £426 — £426 | 1 variant | Price my 2000 |
| 1999 | £426 — £426 | 1 variant | Price my 1999 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older Yariss can still be booked.
What Toyota Yaris owners say
5.00/5 across 7 verified Toyota Yaris owners
Showing 7 reviews from verified Toyota Yaris owners. Across the whole of UK Car Glass, 4.82/5 from 1,422 Trustpilot reviews.
What to expect during your Toyota Yaris rear window replacement
Rear-window replacement with UKCG follows a simple four-step process, from online quote through to fitting.
- 1
Answer a short guided quiz about your Yaris (year, trim, features) — takes about a minute.
- 2
Receive an instant quote matched to your exact variant, with guaranteed pricing.
- 3
Book online and choose your fitting date; we'll match you with an approved local fitter.
- 4
Your fitter attends (usually mobile at your address) and replaces the rear window — typically 30–60 minutes of work.
- 5
Your fitter will clear accessible glass shards as part of the job; for a thorough interior clean afterwards, a professional valet is recommended, as small shards can lodge in places fitters can't always reach on the day.
- 6
Two-year warranty on workmanship and glass quality — covered from the moment you book.
Most customers drive away the same day; your fitter will confirm the minimum drive-away time before leaving.
Mobile fitting or workshop visit for your Yaris?
Most Yaris rear-window replacements are fitted mobile at your address. However, if your vehicle carries Toyota Safety Sense with a rear-view camera system, calibration may be required after fitting — in those cases, we arrange the job at a workshop so calibration can be completed properly, with no split location or multiple visits.
We confirm the specific answer for your vehicle when you book.
What features does your Yaris have?
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Green6
1999–2026Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
What it means
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
How to tell
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Replacement impact
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
Antenna2
2020–2026An aerial laminated into the windscreen or rear window restores radio, DAB or TV reception without a roof-mounted mast.
What it means
An antenna is a conductive print laminated into the glass during manufacture, typically used for radio, DAB (digital audio broadcasting) or television reception. It replaces the traditional roof-mounted aerial mast found on older vehicles. The antenna is integrated into the glass interlayer and connected to the vehicle's receiver unit via a connector embedded in the glass edge. This design offers a cleaner aesthetic, reduces wind noise, and eliminates the vulnerability of a protruding mast to damage or theft.
How to tell
Check your vehicle's roof — if there is no visible aerial mast, your car likely has a laminated antenna. You can also ask your dealer or service centre whether your windscreen or rear window carries an antenna print. The connector may be visible on the glass edge or inside the door frame trim.
Replacement impact
When replacing glass with a laminated antenna, the replacement must carry the matching antenna print and connector to restore reception immediately on fitting. Aftermarket or original-equipment glass with the correct antenna specification is essential; a plain replacement will leave you without radio or DAB signal. Our fitters verify the antenna specification during booking and source the correct variant before the appointment.
Dark Grey2
2011–2026Dark grey tint on rear windows provides privacy and reduces interior heat and glare.
What it means
Dark grey tint, formally known as privacy glass, is a factory-applied tint created through a deep-dipping process during glass manufacture. The pigment is infused into the inner surface of the glass, darkening the rear windows (and sometimes rear doors) significantly more than the front. This reduces heat transmission, minimises glare, and obscures the interior from outside view. It's standard on the rear half of many modern vehicles.
How to tell
Compare the rear side windows and rear window (backlight) to the front side windows — the rear glass will be noticeably darker. Check your vehicle documents or ask your dealership service centre if you're unsure whether your car left the factory with privacy glass.
Replacement impact
Dark grey tinted glass must be sourced from the Original Equipment Equivalent (OEE) or dealership to ensure colour and transmission match your vehicle's existing rear glass. The tint is integral to the glass itself, not a surface coating, so aftermarket non-tinted glass will look visibly mismatched. Replacement does not require any calibration and follows standard bonded-glass cure times for rear windows.
Encapsulation2
1999–2026Factory-bonded rubber or polymer trim means your replacement glass arrives ready to fit as one complete unit.
What it means
Encapsulation is a rubber or polymer gasket moulded directly onto the glass edges during manufacturing. The trim is bonded to the glass at the factory — either by injection moulding, PU robot extrusion, or adhesive bonding. When you need a replacement, the entire panel arrives with its trim already attached, so the glass and gasket are replaced together as a single unit rather than as separate components.
How to tell
Check your current windscreen or rear window edges. If you see a continuous rubber or polymer seal running around the perimeter that appears moulded or permanently bonded to the glass itself — rather than a separate trim clipped or screwed to the frame — your glass is encapsulated. Ask your dealer or service centre to confirm; they can also check your vehicle specification sheet.
Replacement impact
Encapsulated glass simplifies replacement because there's no separate trim to remove, refit, or source. The bonded gasket is replaced as part of the glass unit, which reduces installation complexity and potential leak points. Cure time and drive-away procedures remain unchanged. No additional sourcing delays — encapsulated replacements are stocked as complete assemblies by most suppliers.
Solar Control2
2005–2026Solar control glass absorbs infrared rays to reduce heat and improve cabin comfort.
What it means
Solar control is a coating applied to the windscreen that absorbs the sun's infrared radiation rather than allowing it to pass through into the cabin. This reduces solar heat gain, helping to keep the interior cooler and more comfortable, particularly in warm weather or direct sunlight. The coating is transparent to visible light, so it doesn't darken the windscreen or affect visibility. It's a passive thermal management feature that works continuously whenever the sun is shining on the glass.
How to tell
Check your vehicle's specification sheet or contact your dealership service centre to confirm whether solar control glass is fitted. Some manufacturers list it as 'solar control windscreen', 'heat-reflective glass', or 'thermal management glass'. It's a factory-fitted feature and won't be visibly obvious from outside the car — the coating is integral to the glass itself.
Replacement impact
Solar control glass is a factory-fitted specification. When replacing the windscreen, a solar control variant must be sourced to match the original. This is a standard glass type with no special fitting implications or calibration requirements. Cure and drive-away times follow normal windscreen bonding procedures. Confirm with your fitter that the replacement glass includes solar control to maintain the original thermal performance.
Fitting Hardware1
2017–2020Pre-fitted clips and brackets that secure the glass to your vehicle, supplied ready to bond as a complete unit.
What it means
Fitting hardware comprises the clips, brackets, mouldings and adhesive retention components that hold the glass securely in place on your vehicle's frame. When your replacement glass is supplied with fitting hardware pre-attached, it arrives as a ready-to-install assembly rather than as bare glass requiring separate hardware attachment during the fit. This streamlines the replacement process and ensures correct positioning and fitment.
How to tell
Check your vehicle's service history or contact your dealership service department with your registration number. They can confirm whether your glass comes with pre-fitted hardware as standard. Visually, pre-fitted hardware appears as clips or brackets already bonded or attached to the glass edges before it reaches the fitting technician.
Replacement impact
Glass supplied with pre-fitted hardware typically requires no additional labour to attach clips or brackets during the fit, reducing technician time at the vehicle. The hardware must be in good condition and correctly positioned for the glass to seal and function properly. If hardware is damaged during removal of the old glass, replacement or repair of that hardware may be needed before the new glass can be fitted securely.
About the Toyota Yaris
The Toyota Yaris has been in continuous production since 1999, evolving through five generations. Early models carry straightforward toughened rear windows, whilst later generations from the early 2010s onwards feature tinted rear glass and improved sealing systems.
From around 2018 onwards, newer Yaris models began integrating Toyota Safety Sense, which can include rear-view camera systems. This means some variants may require camera recalibration after rear-window replacement, depending on whether your model carries this technology.
Other Toyota models
Own a different Toyota? We've got you — every variant, every year.
Frequently asked questions
The questions customers ask us most often.