Instant quote across Porsche Cayenne rear-window variants in under 60 seconds, fitted by approved fitters — booked in under two minutes.
Make
Porsche
Model
Cayenne
No card required · Free to quote
Prices vary with generation and specification — earlier 2010s models without acoustic upgrades or antenna integration are typically the most straightforward; later variants with laminated glass, noise-reduction interlayers, or integrated antenna connectors carry higher replacement costs due to complexity and calibration of those features.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2026 | £1,417 — £1,770 | 3 variants | Price my 2026 |
| 2025 | £1,417 — £1,770 | 3 variants | Price my 2025 |
| 2024 | £1,417 — £1,770 | 3 variants | Price my 2024 |
| 2023 | £1,417 — £1,770 | 3 variants | Price my 2023 |
| 2022 | £1,417 — £1,770 | 3 variants | Price my 2022 |
| 2021 | £1,417 — £1,770 | 3 variants | Price my 2021 |
| 2020 | £1,417 — £1,770 | 3 variants | Price my 2020 |
| 2019 | £1,417 — £1,770 | 3 variants | Price my 2019 |
| 2018 | £1,417 — £1,770 | 3 variants | Price my 2018 |
| 2017 | £1,417 — £1,770 | 3 variants | Price my 2017 |
| 2016 | £1,417 — £1,417 | 1 variant | Price my 2016 |
| 2015 | £1,417 — £1,417 | 1 variant | Price my 2015 |
| 2014 | £1,417 — £1,417 | 1 variant | Price my 2014 |
| 2013 | £1,417 — £1,417 | 1 variant | Price my 2013 |
| 2012 | £1,417 — £1,417 | 1 variant | Price my 2012 |
| 2011 | £1,417 — £1,417 | 1 variant | Price my 2011 |
| 2010 | £1,417 — £1,417 | 1 variant | Price my 2010 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older Cayennes can still be booked.
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.82/5 from 1,422 Trustpilot reviews.
Booking your Cayenne rear-window replacement takes just a few minutes, and fitting is usually completed within a couple of hours.
Answer a short online quiz to confirm your model year and rear-window features — takes about a minute.
Our team checks your exact glass specification against our suppliers' stock, ensuring your replacement matches your factory setup.
You're matched with an approved fitter near you, who will contact you to arrange a convenient time.
Your fitter typically completes the replacement within 30–60 minutes of active work, plus time for shard cleanup from the shattered original.
Because a shattered rear window leaves glass debris throughout the boot area and interior trim, we recommend a professional valet afterwards to ensure all shards are removed from places your fitter can't always access on the day.
You'll receive a two-year warranty on the glass and workmanship, and your fitter will confirm the drive-away time before they leave.
All work is backed by our standard two-year warranty, and you're covered against manufacturing defects and fit issues.
Most rear-window replacements can be completed at your home or workplace via mobile fitting, since rear glass doesn't require ADAS calibration. However, some variants with integrated antenna connectors may need a workshop environment to ensure signal reception is properly tested after fitting.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
An aerial laminated into the windscreen or rear window restores radio, DAB or TV reception without a roof-mounted mast.
An antenna is a conductive print laminated into the glass during manufacture, typically used for radio, DAB (digital audio broadcasting) or television reception. It replaces the traditional roof-mounted aerial mast found on older vehicles. The antenna is integrated into the glass interlayer and connected to the vehicle's receiver unit via a connector embedded in the glass edge. This design offers a cleaner aesthetic, reduces wind noise, and eliminates the vulnerability of a protruding mast to damage or theft.
Check your vehicle's roof — if there is no visible aerial mast, your car likely has a laminated antenna. You can also ask your dealer or service centre whether your windscreen or rear window carries an antenna print. The connector may be visible on the glass edge or inside the door frame trim.
When replacing glass with a laminated antenna, the replacement must carry the matching antenna print and connector to restore reception immediately on fitting. Aftermarket or original-equipment glass with the correct antenna specification is essential; a plain replacement will leave you without radio or DAB signal. Our fitters verify the antenna specification during booking and source the correct variant before the appointment.
Factory-bonded rubber or polymer trim means your replacement glass arrives ready to fit as one complete unit.
Encapsulation is a rubber or polymer gasket moulded directly onto the glass edges during manufacturing. The trim is bonded to the glass at the factory — either by injection moulding, PU robot extrusion, or adhesive bonding. When you need a replacement, the entire panel arrives with its trim already attached, so the glass and gasket are replaced together as a single unit rather than as separate components.
Check your current windscreen or rear window edges. If you see a continuous rubber or polymer seal running around the perimeter that appears moulded or permanently bonded to the glass itself — rather than a separate trim clipped or screwed to the frame — your glass is encapsulated. Ask your dealer or service centre to confirm; they can also check your vehicle specification sheet.
Encapsulated glass simplifies replacement because there's no separate trim to remove, refit, or source. The bonded gasket is replaced as part of the glass unit, which reduces installation complexity and potential leak points. Cure time and drive-away procedures remain unchanged. No additional sourcing delays — encapsulated replacements are stocked as complete assemblies by most suppliers.
Dark grey tint on rear windows provides privacy and reduces interior heat and glare.
Dark grey tint, formally known as privacy glass, is a factory-applied tint created through a deep-dipping process during glass manufacture. The pigment is infused into the inner surface of the glass, darkening the rear windows (and sometimes rear doors) significantly more than the front. This reduces heat transmission, minimises glare, and obscures the interior from outside view. It's standard on the rear half of many modern vehicles.
Compare the rear side windows and rear window (backlight) to the front side windows — the rear glass will be noticeably darker. Check your vehicle documents or ask your dealership service centre if you're unsure whether your car left the factory with privacy glass.
Dark grey tinted glass must be sourced from the Original Equipment Equivalent (OEE) or dealership to ensure colour and transmission match your vehicle's existing rear glass. The tint is integral to the glass itself, not a surface coating, so aftermarket non-tinted glass will look visibly mismatched. Replacement does not require any calibration and follows standard bonded-glass cure times for rear windows.
Laminated windscreens hold together when they crack, staying bonded to an inner layer rather than shattering into dangerous shards.
Laminated glass consists of two glass panes bonded to a tough plastic interlayer, usually polyvinyl butyral (PVB). When struck, the glass cracks but the interlayer holds the pieces in place, preventing the sharp shards that would scatter from tempered glass. This design prioritises occupant safety — the windscreen remains structurally sound even after impact, reducing the risk of ejection and keeping wind and weather out of the cabin. Laminated glass also provides sound dampening and blocks most ultraviolet light. All modern windscreens are laminated as standard.
Look at your windscreen edge-on — you'll see a thin darker line (the interlayer) sandwiched between the two glass panes. Tap the glass gently with your knuckle: laminated glass produces a duller, more solid sound compared to the sharper ring of tempered side or rear windows. Your service manual or dealer can confirm, but all production windscreens are laminated.
Laminated glass is bonded to the frame with structural adhesive, so cure time applies after replacement. Your windscreen is safety-critical — it contributes up to 30% of vehicle structural integrity and supports airbag deployment. The adhesive bond must fully cure before the vehicle is driven normally; your fitter will confirm the specific drive-away time before releasing the car. This is true whether or not your windscreen has camera or sensor features.
Factory-fitted brackets and mounts bonded to the glass, pre-assembled and ready to fit without sub-assembly.
Other Hardware refers to factory-fitted brackets, mounts, connectors, or trim pieces bonded permanently to the windscreen or other glass during manufacturing. These are integral to the vehicle's design but do not activate or control a specific feature — they simply secure or position components like sensors, trim strips, or mounting points. Unlike feature-specific hardware, these items are passive structural elements. A replacement carrying Other Hardware arrives pre-bonded and ready to install without additional assembly or modification.
Check your vehicle documentation or ask your dealership service centre whether your windscreen or glass panel carries factory-bonded brackets or mounts. Visual inspection may reveal trim strips, sensor housings, or antenna mounts bonded to the edges or interior surface of the glass. Your original invoice or parts list will specify if Other Hardware is present.
Replacement glass carrying Other Hardware must be sourced as a complete assembly — the brackets and mounts come pre-bonded from the supplier and cannot be transferred from the old glass. Installation is straightforward: the fitter removes the old glass and fits the replacement with its hardware already in place. No additional sub-assembly, bonding, or recalibration of the hardware itself is required. Fitting time is unaffected.
Acoustic glass reduces cabin noise for a quieter, more comfortable ride.
Acoustic windscreen glass is laminated with a special acoustic interlayer that absorbs and dampens sound vibrations. It reduces exterior noise—from traffic, wind, and road surface—before it enters the passenger compartment. This makes the cabin noticeably quieter and creates a more peaceful driving experience. It's a comfort feature, not a safety one; standard laminated windscreens already meet impact safety requirements.
Check your windscreen for an ear symbol, the word 'Acoustic', a capital 'A', or the term 'SoundScreen' printed in one of the four corners. These markings indicate acoustic-grade glass. You can also ask your vehicle's dealership or service centre whether your model came fitted with acoustic glass—it's often a factory option on comfort or premium trims.
Acoustic glass is always laminated and bonds to the frame like any standard windscreen, so replacement follows the normal bonded-glass procedure. No specialist calibration is required. The replacement technician will fit it using standard adhesive and sealant. Cure time and drive-away restrictions are identical to standard laminated windscreens. Acoustic glass is widely available as an aftermarket OE-equivalent option.
Coated windscreens have a blue or purple tint and protect your car from UV rays and heat.
A coated windscreen has a special protective layer applied to the glass that appears as a blue or purple tint and often reflects a silvery-blue colour in bright sunlight. This coating is designed to reduce the amount of ultraviolet (UV) radiation and solar heat that enters the vehicle, helping to keep the interior cooler and protecting upholstery and dashboard components from UV damage and fading. The coating is integral to the glass and doesn't require any special maintenance from you.
Look at your windscreen in bright daylight — a coated windscreen will show a distinct blue or purple tint and a silvery-blue reflection when the sun hits it directly. Check your vehicle's service booklet or window sticker (usually on the driver's door jamb), which may list the glass specification. Alternatively, ask your dealership or service centre to confirm whether your windscreen carries a UV or heat-rejection coating.
When replacing a coated windscreen, the replacement glass must match the original specification — including the coating type and tint level — to maintain the same UV and heat protection and to preserve the vehicle's interior aesthetics. Original-equipment or equivalent aftermarket coated glass is sourced to specification. The coating is applied during glass manufacture; no post-fit treatment is required. Fitting and cure times are unaffected by the presence of the coating.
Pre-fitted clips and brackets that secure the glass to your vehicle, supplied ready to bond as a complete unit.
Fitting hardware comprises the clips, brackets, mouldings and adhesive retention components that hold the glass securely in place on your vehicle's frame. When your replacement glass is supplied with fitting hardware pre-attached, it arrives as a ready-to-install assembly rather than as bare glass requiring separate hardware attachment during the fit. This streamlines the replacement process and ensures correct positioning and fitment.
Check your vehicle's service history or contact your dealership service department with your registration number. They can confirm whether your glass comes with pre-fitted hardware as standard. Visually, pre-fitted hardware appears as clips or brackets already bonded or attached to the glass edges before it reaches the fitting technician.
Glass supplied with pre-fitted hardware typically requires no additional labour to attach clips or brackets during the fit, reducing technician time at the vehicle. The hardware must be in good condition and correctly positioned for the glass to seal and function properly. If hardware is damaged during removal of the old glass, replacement or repair of that hardware may be needed before the new glass can be fitted securely.
Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
Heat-absorbing PVB interlayer reduces solar gain and cabin temperature on warm days—but must match your original spec.
Heat-absorbing PVB is a specially formulated interlayer sandwiched between the glass plies in your windscreen. It absorbs a portion of the sun's infrared radiation before it enters the cabin, reducing solar heat gain on warm days. This keeps the interior cooler and reduces air-conditioning workload. The feature is built into the glass during manufacture and cannot be added or removed after production. If your vehicle left the factory with this interlayer, any replacement windscreen must carry the same PVB specification to maintain the original thermal performance.
Check your vehicle's specification sheet or handbook—heat-absorbing PVB is listed under windscreen or glass specification. You can also ask your dealership service centre or provide us with your vehicle registration; we'll confirm whether your car came with this feature as standard or as an option.
Replacement windscreens with heat-absorbing PVB must be sourced to the exact OE specification—aftermarket alternatives with standard PVB will not deliver the same solar-control performance. We ensure the correct spec is ordered before the fit. No calibration is required. Installation and cure procedures are identical to standard windscreen replacement; the interlayer is integral to the glass and requires no additional treatment.
Privacy glass is a darker tint applied to rear and side windows for passenger comfort and security.
Privacy glass is a factory-applied dark tint coating on the rear window and side windows (or a selection of them) to reduce visibility into the vehicle's interior. It serves two purposes: it helps protect passengers and cargo from the sun, and it provides visual security by obscuring the view of occupants and valuables from outside. The tint is integral to the glass itself — either applied during manufacture or as a permanent coating — and is not the same as an aftermarket film.
Look at the rear window and rear side windows from outside the vehicle. If they appear noticeably darker than the windscreen and front side windows, the car has privacy glass. Check your vehicle documentation (handbook or service history) under 'glass specifications' or 'optional equipment', or ask your dealership service centre — they can confirm which windows have the tint applied.
Privacy glass must be replaced with OEM (original equipment manufacturer) glass of the same tint specification. Aftermarket alternatives are available but may not match the original colour or darkness exactly. The replacement is a straightforward swap with no calibration implications. Availability is standard for mainstream models; lead time may be slightly longer for less common variants or older vehicles.
A TV-reception aerial printed into the rear window, typically for in-car entertainment systems.
A TV antenna is an aerial pattern laminated into the rear windscreen or rear side window to receive broadcast television signals. It's a separate system from the vehicle's radio or mobile antenna and is typically found in vehicles equipped with rear-seat entertainment systems. The antenna is printed directly onto or into the glass during manufacture, so when the glass is replaced, the antenna pattern must be reproduced on the replacement to maintain reception quality.
Check your vehicle's specification sheet or handbook for rear-seat entertainment or TV tuner capability. If your car has a rear-seat entertainment system with a TV tuner, the rear window will have a TV antenna. You can also ask your dealer or service centre to confirm whether your vehicle has this feature.
When the rear window is replaced, the replacement glass must include the matching TV antenna print to preserve reception. OEM (original equipment manufacturer) glass is typically required to ensure the antenna pattern is identical. The antenna is passive and requires no calibration or specialist procedures after fitting. Cure time for bonded rear glass is required; the fitter will confirm the drive-away time on the day.
The Porsche Cayenne has been in continuous production since 2002, evolving through three distinct generations with progressively refined glass specifications.
Earlier Cayennes carry straightforward toughened rear windows, while later models from the mid-2010s onwards introduce laminated options, antenna integration, and acoustic interlayers on select trims. Many variants feature encapsulated edges — a pre-moulded rubber gasket bonded to the glass at the factory — which means your replacement arrives as a complete panel-plus-trim unit.
All current Cayenne rear windows are typically toughened (shatter into small pieces rather than crack), though a small number of premium variants carry laminated specifications. Your fitter will confirm the exact glass type during the quote process.
Own a different Porsche? We've got you — every variant, every year.
The questions customers ask us most often.
