Pete C.
Verified on Trustpilot6 Nov 2026
2019 Dacia Duster
Excellent service from initial enquiry…
Excellent service from initial enquiry to changing the windscreen,prompt and thorough
Get an instant price for your MG HS. We match your exact fitment against 2+ rear window options and connect you with a trusted specialist — mobile or workshop, confirmed when we book.
Make
MG
Model
HS
No card required · Free to quote
Prices shown are the range across HS variants for each production year. Your exact price depends on which features your car has — camera, rain sensor, acoustic glass, heated band — which the quote form identifies in under two minutes.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2026 | £483 — £483 | 1 variant | Price my 2026 |
| 2025 | £483 — £483 | 1 variant | Price my 2025 |
| 2024 | £483 — £483 | 1 variant | Price my 2024 |
| 2023 | £426 — £426 | 1 variant | Price my 2023 |
| 2022 | £426 — £426 | 1 variant | Price my 2022 |
| 2021 | £426 — £426 | 1 variant | Price my 2021 |
| 2020 | £426 — £426 | 1 variant | Price my 2020 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older MG HS models can still be booked.
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.82/5 from 1,501 Trustpilot reviews.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
On the MG HS: fitted on every one of the 2 rear window variants we list; model years 2020–2026.
An aerial laminated into the windscreen or rear window restores radio, DAB or TV reception without a roof-mounted mast.
An antenna is a conductive print laminated into the glass during manufacture, typically used for radio, DAB (digital audio broadcasting) or television reception. It replaces the traditional roof-mounted aerial mast found on older vehicles. The antenna is integrated into the glass interlayer and connected to the vehicle's receiver unit via a connector embedded in the glass edge. This design offers a cleaner aesthetic, reduces wind noise, and eliminates the vulnerability of a protruding mast to damage or theft.
Check your vehicle's roof — if there is no visible aerial mast, your car likely has a laminated antenna. You can also ask your dealer or service centre whether your windscreen or rear window carries an antenna print. The connector may be visible on the glass edge or inside the door frame trim.
When replacing glass with a laminated antenna, the replacement must carry the matching antenna print and connector to restore reception immediately on fitting. Aftermarket or original-equipment glass with the correct antenna specification is essential; a plain replacement will leave you without radio or DAB signal. Our fitters verify the antenna specification during booking and source the correct variant before the appointment.
On the MG HS: fitted on every one of the 2 rear window variants we list; model years 2020–2026.
Dark grey tint on rear windows provides privacy and reduces interior heat and glare.
Dark grey tint, formally known as privacy glass, is a factory-applied tint created through a deep-dipping process during glass manufacture. The pigment is infused into the inner surface of the glass, darkening the rear windows (and sometimes rear doors) significantly more than the front. This reduces heat transmission, minimises glare, and obscures the interior from outside view. It's standard on the rear half of many modern vehicles.
Compare the rear side windows and rear window (backlight) to the front side windows — the rear glass will be noticeably darker. Check your vehicle documents or ask your dealership service centre if you're unsure whether your car left the factory with privacy glass.
Dark grey tinted glass must be sourced from the Original Equipment Equivalent (OEE) or dealership to ensure colour and transmission match your vehicle's existing rear glass. The tint is integral to the glass itself, not a surface coating, so aftermarket non-tinted glass will look visibly mismatched. Replacement does not require any calibration and follows standard bonded-glass cure times for rear windows.
On the MG HS: fitted on every one of the 2 rear window variants we list; model years 2020–2026.
Heated rear windscreen with integrated wires clears mist and ice when you switch on the demister.
A heated rear windscreen contains fine heating wires embedded within the glass. When you activate the rear demister, an electrical current passes through these wires, warming the glass and melting ice or condensation. This feature is particularly useful in cold or damp weather, improving rear visibility quickly. The heating grid is integral to the glass and connected to your vehicle's electrical circuit via connectors at the base of the windscreen.
Look at the rear windscreen from inside the vehicle — you will see a fine grid of horizontal lines across the glass, typically bronze or copper in colour. On the dashboard or steering wheel stalk, there will be a dedicated rear-demist button, usually marked with a windscreen symbol and heating lines. If in doubt, ask your vehicle's service centre or consult your handbook.
Replacement rear windscreens with heated grids are widely available as original-equipment aftermarket or dealership parts. The new glass must include the factory heating grid and electrical connectors intact. The technician will reconnect the heating circuit to your vehicle's rear-demist switch. Heated rear windscreens are bonded glass, so adhesive cure time applies; drive-away time will be confirmed by the fitter on the day.
On the MG HS: fitted on 1 of the 2 rear window variants we list (50%); model years 2024–2026.
A brake light integrated into the rear window glass itself, requiring a matching replacement to reconnect the original lighting circuit.
A brake light integrated into the rear window glass is a lighting element built directly into the glass panel during manufacturing. Rather than using a separate lamp cluster mounted to the vehicle body, the light circuit is routed through conductive elements — typically a silkscreen pattern, wire network, or bracket assembly — embedded in or bonded to the glass itself. When you brake, this integrated light illuminates to warn following traffic. It combines functionality with design integration, reducing the number of separate components on the rear of the vehicle.
Check your vehicle's rear window for a visible pattern of fine lines or wires running across the glass, usually near the top edge or spanning the upper portion. Look at your vehicle's manual or contact your dealer's service centre — they can confirm whether your rear window carries an integrated brake light. If you see a separate brake-light cluster mounted to the bodywork instead, your vehicle does not have this feature.
The replacement rear window must carry the identical integrated brake-light pattern so the original lighting circuit reconnects without modification. The conductive elements — whether silkscreen, wiring, or bracket fittings — must align precisely with the vehicle's electrical connections. Using a standard rear window without this pattern would disable the brake light. We source the correct OE-specification glass to ensure a seamless fit and restore full functionality.
Is the windscreen damaged too? See MG HS windscreen replacement.
Need a price for another vehicle? Go to UK rear window replacement and choose your make.
Own a different MG? We've got you — every variant, every year.
The questions customers ask us most often.
Most rear window replacements take under an hour of the technician's time. Shard cleanup adds variable time depending on access — your technician will give you a more precise estimate when they arrive.
A shattered rear window means shard cleanup is part of the job. The technician will clear as much accessible broken glass as possible, but small shards can lodge in places that need deeper access (under seats, in seatbelt mechanisms, in trim channels). For thorough interior detailing afterwards, we recommend booking a professional valet.
Your replacement glass matches your original factory specification — same size, tint, and any heating elements or aerial wiring as the glass the car left the factory with. It's UK-approved for the road and typically supplied by tier-1 manufacturers like Pilkington, Saint-Gobain, and AGC.
OEM-branded glass (with the vehicle-maker logo) is available on request at a higher price.
Most rear window replacements happen at your chosen location — home, office, or car park. Some jobs are better suited to a workshop — typically when access to power (for vacuum cleanup), shelter, or controlled conditions for adhesive bonding is needed. We let you know when we confirm your booking.
Most UK comprehensive policies include glass cover, typically with an excess of £75–£100. If your insurer is on our approved list, the specialist you're matched with bills them directly and you just pay the excess.
Otherwise you can pay UK Car Glass directly and claim back from your insurer — our all-inclusive price is often lower than the excess anyway, so paying direct can work out cheaper.
Two years on workmanship defects — water leaks, wind noise, bonding failures — from the date of replacement. If the specialist's work isn't right, we arrange to put it right under the warranty process.