Instant prices across 9 Honda models. Pick your model below — we match your exact fitment and connect you with a vetted specialist.
Make
Honda
No card required · Free to quote
Pick your model to see every year and variant in our catalogue, with instant online prices matched to your exact specification.
Showing 17 reviews from verified Honda owners. Across the whole of UK Car Glass, 4.82/5 from 1,456 Trustpilot reviews.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Heated rear windscreen with integrated wires clears mist and ice when you switch on the demister.
A heated rear windscreen contains fine heating wires embedded within the glass. When you activate the rear demister, an electrical current passes through these wires, warming the glass and melting ice or condensation. This feature is particularly useful in cold or damp weather, improving rear visibility quickly. The heating grid is integral to the glass and connected to your vehicle's electrical circuit via connectors at the base of the windscreen.
Look at the rear windscreen from inside the vehicle — you will see a fine grid of horizontal lines across the glass, typically bronze or copper in colour. On the dashboard or steering wheel stalk, there will be a dedicated rear-demist button, usually marked with a windscreen symbol and heating lines. If in doubt, ask your vehicle's service centre or consult your handbook.
Replacement rear windscreens with heated grids are widely available as original-equipment aftermarket or dealership parts. The new glass must include the factory heating grid and electrical connectors intact. The technician will reconnect the heating circuit to your vehicle's rear-demist switch. Heated rear windscreens are bonded glass, so adhesive cure time applies; drive-away time will be confirmed by the fitter on the day.
Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
A brake light integrated into the rear window glass itself, requiring a matching replacement to reconnect the original lighting circuit.
A brake light integrated into the rear window glass is a lighting element built directly into the glass panel during manufacturing. Rather than using a separate lamp cluster mounted to the vehicle body, the light circuit is routed through conductive elements — typically a silkscreen pattern, wire network, or bracket assembly — embedded in or bonded to the glass itself. When you brake, this integrated light illuminates to warn following traffic. It combines functionality with design integration, reducing the number of separate components on the rear of the vehicle.
Check your vehicle's rear window for a visible pattern of fine lines or wires running across the glass, usually near the top edge or spanning the upper portion. Look at your vehicle's manual or contact your dealer's service centre — they can confirm whether your rear window carries an integrated brake light. If you see a separate brake-light cluster mounted to the bodywork instead, your vehicle does not have this feature.
The replacement rear window must carry the identical integrated brake-light pattern so the original lighting circuit reconnects without modification. The conductive elements — whether silkscreen, wiring, or bracket fittings — must align precisely with the vehicle's electrical connections. Using a standard rear window without this pattern would disable the brake light. We source the correct OE-specification glass to ensure a seamless fit and restore full functionality.
Dark grey tint on rear windows provides privacy and reduces interior heat and glare.
Dark grey tint, formally known as privacy glass, is a factory-applied tint created through a deep-dipping process during glass manufacture. The pigment is infused into the inner surface of the glass, darkening the rear windows (and sometimes rear doors) significantly more than the front. This reduces heat transmission, minimises glare, and obscures the interior from outside view. It's standard on the rear half of many modern vehicles.
Compare the rear side windows and rear window (backlight) to the front side windows — the rear glass will be noticeably darker. Check your vehicle documents or ask your dealership service centre if you're unsure whether your car left the factory with privacy glass.
Dark grey tinted glass must be sourced from the Original Equipment Equivalent (OEE) or dealership to ensure colour and transmission match your vehicle's existing rear glass. The tint is integral to the glass itself, not a surface coating, so aftermarket non-tinted glass will look visibly mismatched. Replacement does not require any calibration and follows standard bonded-glass cure times for rear windows.
Solar control glass absorbs infrared rays to reduce heat and improve cabin comfort.
Solar control is a coating applied to the windscreen that absorbs the sun's infrared radiation rather than allowing it to pass through into the cabin. This reduces solar heat gain, helping to keep the interior cooler and more comfortable, particularly in warm weather or direct sunlight. The coating is transparent to visible light, so it doesn't darken the windscreen or affect visibility. It's a passive thermal management feature that works continuously whenever the sun is shining on the glass.
Check your vehicle's specification sheet or contact your dealership service centre to confirm whether solar control glass is fitted. Some manufacturers list it as 'solar control windscreen', 'heat-reflective glass', or 'thermal management glass'. It's a factory-fitted feature and won't be visibly obvious from outside the car — the coating is integral to the glass itself.
Solar control glass is a factory-fitted specification. When replacing the windscreen, a solar control variant must be sourced to match the original. This is a standard glass type with no special fitting implications or calibration requirements. Cure and drive-away times follow normal windscreen bonding procedures. Confirm with your fitter that the replacement glass includes solar control to maintain the original thermal performance.
An aerial laminated into the windscreen or rear window restores radio, DAB or TV reception without a roof-mounted mast.
An antenna is a conductive print laminated into the glass during manufacture, typically used for radio, DAB (digital audio broadcasting) or television reception. It replaces the traditional roof-mounted aerial mast found on older vehicles. The antenna is integrated into the glass interlayer and connected to the vehicle's receiver unit via a connector embedded in the glass edge. This design offers a cleaner aesthetic, reduces wind noise, and eliminates the vulnerability of a protruding mast to damage or theft.
Check your vehicle's roof — if there is no visible aerial mast, your car likely has a laminated antenna. You can also ask your dealer or service centre whether your windscreen or rear window carries an antenna print. The connector may be visible on the glass edge or inside the door frame trim.
When replacing glass with a laminated antenna, the replacement must carry the matching antenna print and connector to restore reception immediately on fitting. Aftermarket or original-equipment glass with the correct antenna specification is essential; a plain replacement will leave you without radio or DAB signal. Our fitters verify the antenna specification during booking and source the correct variant before the appointment.
Blue-tinted windscreens reduce glare and heat while maintaining a subtle, modern appearance.
A blue tint is a light coloration applied to the windscreen glass, usually during manufacture. It reduces solar heat transmission and glare from sunlight, particularly on bright days or when driving into the sun. The tint is integral to the glass itself — not a separate film — and is chosen by the vehicle manufacturer to balance comfort, visibility, and aesthetic consistency with the vehicle's side windows and rear window. Most vehicles come with a green or blue tint as standard; the choice depends on the manufacturer's design and regional climate considerations.
Check your side windows by rolling one halfway down and holding a white piece of paper behind the glass. If you see a blue tint reflected in the glass, your windscreen will have the same tint. You can also ask your vehicle's dealership or service centre to confirm the windscreen tint specification. The tint is visible when comparing the windscreen to clear glass, though it may be subtle and harder to spot on overcast days.
Blue-tinted replacement windscreens must match the original tint to maintain visual consistency with your side and rear windows. Most replacement glass is available in the correct tint through OE (original equipment) suppliers. There is no calibration requirement related to tint. The tint does not affect fitting time, cure time, or drive-away schedules. Ensure the replacement windscreen is specified with the blue tint to avoid a mismatched appearance.
GPS antenna built into the windscreen connects your sat-nav to satellite signals for reliable navigation.
A GPS antenna is laminated into the windscreen glass during manufacture, providing a direct aerial connection for your vehicle's satellite-navigation system. This integrated design offers better signal reception than external antennas and a cleaner aesthetic. The antenna print and electrical connector are engineered into the glass itself, allowing the navigation receiver to lock onto GPS satellites without interference from the vehicle's metal body or other components.
Check your vehicle's handbook or ask your dealership service centre whether your windscreen carries an integrated GPS antenna. You won't see obvious external aerials or connectors on the glass itself — the antenna is laminated internally. If your sat-nav works reliably without a visible roof-mounted antenna, it's likely GPS-equipped.
Replacement windscreens with GPS antennas must be sourced as OEM (original-equipment) glass to preserve navigation functionality. The antenna print pattern and electrical connector are specific to your vehicle's sat-nav system. Aftermarket glass without the antenna print will not support GPS reception. We confirm OEM availability when you book; lead times may be slightly longer than standard glass.
An opening pane with hinged hardware, typically on rear quarters or van sides.
An opening glass pane is a hinged or pivoting section of bodyglass designed to swing or tilt outward for ventilation or access. Commonly found on rear quarters of estates or vans, and on van side panels. Unlike fixed side windows or windscreens, opening panes are part of the vehicle's passive ventilation system and allow airflow without opening a door or window. The hinge and frame hardware are integral to the feature's function.
Check your vehicle's side and rear quarter panels for hinged glass sections that swing outward. Ask your dealer or service centre whether your model includes rear quarter vents or van-side opening panels. Your handbook will list ventilation features. Opening panes are visually distinct from sliding or rolling windows — they pivot on visible hinges rather than moving vertically or horizontally.
UKCG handles opening-pane replacement on a bespoke basis — please contact us for a quote rather than using the automated quote tool. Replacement includes the glass pane and matching hinge hardware where supplied. Fitting time is typically brief as there is no adhesive cure or calibration required. The pane is held in place by mechanical hinges and seals, so you can use the vehicle immediately after fitting.
A TV-reception aerial printed into the rear window, typically for in-car entertainment systems.
A TV antenna is an aerial pattern laminated into the rear windscreen or rear side window to receive broadcast television signals. It's a separate system from the vehicle's radio or mobile antenna and is typically found in vehicles equipped with rear-seat entertainment systems. The antenna is printed directly onto or into the glass during manufacture, so when the glass is replaced, the antenna pattern must be reproduced on the replacement to maintain reception quality.
Check your vehicle's specification sheet or handbook for rear-seat entertainment or TV tuner capability. If your car has a rear-seat entertainment system with a TV tuner, the rear window will have a TV antenna. You can also ask your dealer or service centre to confirm whether your vehicle has this feature.
When the rear window is replaced, the replacement glass must include the matching TV antenna print to preserve reception. OEM (original equipment manufacturer) glass is typically required to ensure the antenna pattern is identical. The antenna is passive and requires no calibration or specialist procedures after fitting. Cure time for bonded rear glass is required; the fitter will confirm the drive-away time on the day.
A printed VIN reference box along the bottom edge of your windscreen helps identify your vehicle's chassis number at a glance.
A VIN (Vehicle Identification Number) notch is a small printed or etched box positioned along the lower edge of the windscreen that displays your vehicle's chassis number. This reference marking is a manufacturing and administrative feature, allowing quick visual identification of the vehicle without needing to consult documents. It's particularly useful for service records, insurance claims, and vehicle registration purposes. The notch itself doesn't affect the structural integrity or safety performance of the glass.
Look along the bottom edge of your windscreen — typically in one of the lower corners — for a small rectangular box containing printed digits or characters. If you're uncertain, check your vehicle's service handbook or ask your dealership or service centre to confirm whether your model includes this feature.
When your windscreen is replaced, the new glass will retain the VIN notch printed or etched by the manufacturer. This is a standard feature on replacement windscreens for compatible vehicles and requires no additional work or adjustment. The notch does not affect glass fitting, cure time, or any post-replacement calibration procedures.
The questions customers ask us most often.
